Victron energy CCGX Manuel utilisateur
2020-11-10 03:20 1/6 GX - Fischer Panda generators
Victron Energy - https://www.victronenergy.com/live/
CCGX & Fischer Panda generators
Beginning with CCGX v2.07 it became possible to read data from your Fischer Panda generator. The
generator needs to be connected to the VE.Can port of the CCGX, which requires a Fischer Panda SAE
J1939 module.
Requirements
CCGX or Venus GX
Fischer Panda generator, xControl or iGenerator
Fischer Panda SAE J1939 CAN module (part number 0006107)
Fischer Panda FP-Bus to VE.Can adapter (part number 0023441)
Fischer Panda Firmware requirements:
iControl (for the iGenerator): v2.17 minimum
iControl panel: no minimum requirement
xControl (for the constant speed generators): 4V38 minimum
xContr panel: 4V29
Fischer Panda SAE J1939 CAN module: 2V05
Fischer Panda three phase module: 4V0b
Connecting
xControl
The schematic below shows how to connect a Fischer Panda xControl generator.
2020-11-10 03:20 3/6 GX - Fischer Panda generators
Victron Energy - https://www.victronenergy.com/live/
Menu
When all wiring is complete and the setup has been correctly carried-out, the Fischer Panda will show
up in the device list:
Entering the Fischer Panda device on the menu reveals a page like this:
Last update: 2018-03-20 13:28 ccgx:fischer_panda https://www.victronenergy.com/live/ccgx:fischer_panda?rev=1521548908
https://www.victronenergy.com/live/ Printed on 2020-11-10 03:20
Notice that it features an on/off switch as well as displaying status information, and the main AC
parameters: voltage, current and power.
Engine temperature, RPM and additional information are all available by entering the Engine sub
menu item.
Generator start/stop
In addition to the manual start/stop and monitoring, there is also an automatic start/stop feature. This
has the same comprehensive range of options as the Generator start/stop feature associated with the
CCGX relay. See GX - Generator auto start/stop for the manual.
2020-11-10 03:20 5/6 GX - Fischer Panda generators
Victron Energy - https://www.victronenergy.com/live/
Maintenance
Whenever performing maintenance on the generator, be sure to stop the generator from the Fischer
Panda control panel. This will disable the Fischer Panda autostart feature, and ensure that the
generator cannot be remotely started - by a CCGX, for example.
When the maintenance is completed, make sure you enable the autostart feature again. You can do
this on the Fischer Panda control panel in the menu generator → autostart → turn on / off.
Troubleshooting
I've set the mode of the genset to 'On' or 'Auto start/stop' but the generator is not
starting/running.
Make sure the Fischer Panda autostart feature is on, this allows the CCGX control the remote on/off of
the genset. You can find this option on the control panel in the menu generator → autostart →
turn on / off.
If you're manually trying to start the genset, a toast message appears with the text AutoStart
functionality is currently disabled, enable it on the genset panel in order
to start the genset from this menu.
If the generator auto start/stop is enabled, it will show error #1 Remote switch control
Last update: 2018-03-20 13:28 ccgx:fischer_panda https://www.victronenergy.com/live/ccgx:fischer_panda?rev=1521548908
https://www.victronenergy.com/live/ Printed on 2020-11-10 03:20
disabled on the Auto start/stop page.
Disqus
View the discussion thread.
From:
https://www.victronenergy.com/live/ - Victron Energy
Permanent link:
https://www.victronenergy.com/live/ccgx:fischer_panda?rev=1521548908
Last update: 2018-03-20 13:28
Autres manuels pour CCGX
9
Table des matières
Autres manuels Victron energy Panneau de contrôle
Victron energy
Victron energy Color Control GX Manuel utilisateur
Victron energy
Victron energy Color Control GX Manuel utilisateur
Victron energy
Victron energy Skylla-i Control GX Manuel utilisateur
Victron energy
Victron energy Color Control GX Manuel utilisateur
Victron energy
Victron energy VE.Bus Manuel utilisateur
Victron energy
Victron energy VE.Net Blue Power Panel Manuel utilisateur
Victron energy
Victron energy Digital Multi Control Manuel utilisateur
Victron energy
Victron energy Blue Power BMV-602 Manuel utilisateur
