Cordless Screwdriver 11149 Instructions for Use
Please read and retain these instructions for future reference V002: 09/09/18
Work Area
•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•Keep bystanders, children and visitors away while operating a power tool. Distractions can
cause you to lose control.
Electrical Safety
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE CHARGING CORD, PLUG OR ITEM
IN WATER OR ANY OTHER LIQUID.
UNPLUG FROM OUTLET WHEN FULLY CHARGED.
DO NOT CHARGE WITH A DAMAGED CORD OR PLUG OR IF THE ITEM HAS BEEN DAMAGED IN
ANY MANNER.
THE USE OF ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD
MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
NEVER USE THE CORD TO CARRY THE TOOL. KEEP CORD AWAY FROM HEAT, OIL, SHARP
EDGES OR MOVING PARTS. REPLACE DAMAGED CORDS IMMEDIATELY. DAMAGED CORDS
MAY CREATE A FIRE.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE
FOUND. TAKE CARE NOT TO DROP AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
•BEFORE CONNECTING, CHECK IF THE VOLTAGE INDICATED ON THE BOTTOM OF THE
APPLIANCE IS IN ACCORDANCE WITH THE MAIN VOLTAGE IN YOUR HOME.
Personal Safety
•STAY ALERT, WATCH WHAT YOU ARE DOING, AND USE COMMON SENSE WHEN OPERATING
A POWER TOOL. DO NOT USE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS,
ALCOHOL, OR MEDICATION. A MOMENT OF DISTRACTION HILE OPERATING POWER TOOLS
MAY RESULT IN SERIOUS PERSONAL INJURY.
•DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELRY. KEEP YOUR HAIR,
CLOTHING, AND GLOVES AWAY FROM MOVING PARTS.
•AVOID ACCIDENTAL STARTING, CARRYING TOOLS WITH YOUR FINGER ON THE SWITCH
INVITES ACCIDENTS.
•DO NOT OVERREACH. KEEP PROPER FOOTING AND BALANCE AT ALL TIMES TO ENABLE
BETTER CONTROL OF THE TOOL IN UNEXPECTED SITUATIONS.
•USE APPROPRIATE SAFETY EQUIPMENT FOR THE CONDITIONS. ALWAYS WEAR EYE
PROTECTION, DUST MASK, NON-SKID SAFETY SHOES, HARD HAT OR HEARING PROTECTION
AS APPROPRIATE.
•DO NOT TOUCH MOVING PARTS. ALLOW THE POWER TOOL ACCESSORIES (BIT AND BLADES
ETC.) TO COOL BEFORE TOUCHING THEM. THEY CAN BECOME EXTREMELY HOT DURING USE
AND CAN BURN YOUR SKIN.
