Vicon I-ONYX VND-970IP Manuel utilisateur

Configuring the VND-970IP

When the dome has been connected to the network check that the dome is in the same IP range as being used by ViconNet,

the default IP address for the VND-970IP is 192.168.0.100. if the IP that is to be used is different then this IP address will

need to be changed to the same range. To change this setup, use a PC on the same IP range as the camera and then use

internet explorer, enter the camera address into the address bar and press go. The dome is set to get IP address automatically.

Go to the nucleus machine and log on.

Once logged in click on setup this will then bring up setup site selection

Select the nucleus setup (this will be the top selection in the list) and press the select, you will now enter the nucleus settings

From here click on the I-Onyx 9xx and third party camera button.

This will now enter into I-onyx and third party camera settings for adding I-onyx and third party cameras

When using ViconNet 5.2 then add camera needs to be pressed and the settings added manually

Add all the details camera name, IP address, username, password and Vendor name this must be set to VND-970

Once these details have been entered click on the save and the details will now be shown in the camera list.

Now close this screen and exit out of the setup back to the main screen, the camera will now be shown in

the ViconNet tree on the left of the screen.

Click on the camera this will now show 1 Camera 1 click this and the camera will now appear on the screen

This is the camera now setup through the ViconNet.

When using Viconnet 5.6b adding the camera to the ViconNet instead of add camera you should add I-

onyx 9xx camera

On the screen there is a drop down box that says available I-onyx cameras on net find your camera this will

insert the camera name and IP address into the boxes, save the settings the camera information will now be

shown in the camera list

Close the window until back to main window, select the camera it will then display 1 Camera 1 select this

and the picture will now be on the screen.

This is the camera setup onto the ViconNet system.

The next step will be to set the cameras for record. Before you do this you need to check that the clock

settings of the camera are set correctly for your location. Please check the camera manual for the clock

configuration. Next go into the setup for the NVR that you are recording to and click the macro editor

button

In the macro editor click on add macro this will then open up the editor for setting up the macro

Enter a name for your macro e.g. VND-970IP and select record

At the bottom you will now have a list of cameras that are available select the VND-970IP and the

1 Camera 1 this will go bold text then select the duration tick the unlimited box select the quality and then

apply.

This will now show the macro that has been setup now press the save and close the macro window that will

take you back to the NVR setup

Now you will need to setup the schedule for the macro to record click the schedule for macro button this

will take you into the schedule for macro window

Click on the Add button and select the created macro in the drop down box

Once the macro has been selected click save and close the scheduler and exit the NVR setup back to the

main screen.

This will now be recording the camera and this can be seen at the bottom of the screen

This shows that the camera is recording and the schedule is active getting the system to record the VND-

970IP

Autres manuels pour I-ONYX VND-970IP

Autres manuels Vicon Caméra de sécurité

Vicon

Vicon VC-621 Manuel utilisateur

Vicon

Vicon V992-N Manuel utilisateur

Vicon

Vicon V960D-N312 Manuel d'instructions

Vicon

Vicon S2000-MSH-HHB Surveyor 2000 Manuel utilisateur

Vicon

Vicon V9360-1 Guide de démarrage rapide

Vicon

Vicon XX247-32-00 Manuel utilisateur

Vicon

Vicon VC-3000-DSP Manuel utilisateur

Vicon

Vicon ROUGHNECK V910 Manuel utilisateur

Vicon

Vicon V661-N-1 Series Mode d'emploi

Vicon

Vicon VC-620 Manuel utilisateur

Vicon

Vicon V2008-WNL-LPR Manuel utilisateur

Vicon

Vicon V7FCD Guide de l'utilisateur

Vicon

Vicon 240-60 Series Manuel utilisateur

Vicon

Vicon V920B-A Series Manuel utilisateur

Vicon

Vicon Roughneck AI V2008B-W310LPR Manuel utilisateur

Vicon

Vicon Roughneck V894CSH Series Manuel utilisateur

Vicon

Vicon surveyor X971 Manuel utilisateur

Vicon

Vicon V942D-W312MIR Manuel utilisateur

Vicon

Vicon VC-632 Manuel utilisateur

Vicon

Vicon VC-620 Manuel utilisateur

Vicon

Vicon Roughneck AI V2000D Series Manuel utilisateur

Vicon

Vicon IX 4000 L Manuel utilisateur

Vicon

Vicon SURVEYORVFT SVFT Manuel utilisateur

Vicon

Vicon Surveyor MKII Series XX282-40-01 Guide rapide

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur