Viavito PC1000 Manuel utilisateur
Owner’s Manual.
GT Power Cage
PC1000
www.viavito.com
Manual version 1.1
R
02 www.viavito.com
Congratulations
on purchasing your
very own PC1000
GT Power Cage.
Manual Contents
You have chosen a high-quality, safe and
innovative piece of exercise equipment as
your training partner and we are certain
it will keep you motivated on the way to
achieving your personal tness goals.
Please take the time to read this owner’s
manual as it will help you to get the most
out of your new piece of equipment.
For more information, or if you require
any assistance please email us at
support@viavito.com
Safety Standards:
The weight bench conforms
to the following standard:
EVS-EN ISO 20957-1-2013
R
Safety Information 03/05
Assembly 06/13
Product Overview 06
Parts Identication Chart 07
Before You Begin 08
Assembly Instructions 09/13
Conditioning Guidelines 14/17
Beginner’s Guide to Exercise 15
Stretching Guide 16/17
Customer Support 18/19
Contact Information 18
Manufacturer’s Warranty 19
Technical Information 20/22
Exploded Diagram 20
Parts List 21
Space Required 22
03www.viavito.com
Safety Information
R
• Please read all the instructions carefully
before using this product.
• Retain this manual for future reference.
• The specications of this product may
vary slightly from the illustrations and
are subject to change without notice.
This exercise machine is built for optimum
safety. However, certain precautions apply
whenever you operate a piece of exercise
equipment. Be sure to read the entire
manual before you operate your machine.
In particular, note the following safety
precautions:
01 It is the responsibility of the owner
to ensure that all users of the power
cage are adequately informed of all
precautions.
02 The power cage is intended for home
use only. Do not use the power cage in
any commercial, rental, or institutional
setting.
03 Keep the power cage indoors, away
from moisture and dust. Do not put
the power cage in a garage or covered
patio, or near water.
04 Use the power cage only on a level
surface. Cover the oor beneath the
power cage to protect the oor.
05 Children and pets shall not play
unsupervised around the power cage.
06 Damaged or worn parts may be
dangerous for users and the integrity
of the power cage. Replace worn or
damaged components immediately
and do not use the power cage until
any issues have been resolved. Use only
spare parts supplied by Viavito.
07 Always wear appropriate workout
clothing when exercising. Sports
shoes are required when using this
equipment.
08 If you feel pain or dizziness at any time
while exercising, stop immediately and
begin cooling down.
09 Choking hazard! Keep small parts and
polybags away from children.
10 Make sure the is enough clearance
around the power cage (at least 0.6m
in all directions).
11 Only use the power cage for its
intended purpose. It is not suitable for
therapeutic or medical purposes.
12 Check all the bolts, nuts and other
connections before using the power
cage for the rst time and ensure that
it has been built correctly and is safe to
be used.
13 Unauthorized repairs or altering the
power cage’s design or functions may be
dangerous and will void the warranty.
04 www.viavito.com
R
14 Periodically check all bolts, nuts and
other connections to make sure that
they are secure and in good working
condition.
15 WARNING! Inappropriate use of this
machine such as while under the
inuence of drugs or alcohol, not in line
with instructions or excessive usage,
may result in serious injury or death.
16 Disabled persons should not use this
equipment without a qualied person
or physician in attendance.
17 The power cage is designed to
18 WARNING! Before beginning this or
any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons
with pre-existing health problems. Read
all instructions before using. Viavito
takes no responsibility for personal
injury or property damage sustained by
or through the use of this product.
Viavito assumes no responsibility for the
personal injury and/or property damage
sustained by or though the use of this
product.
SAVE THESE INSTRUCTIONS.
support a maximum weight of 330kg
on the pull up station. Do not place
more than 300kg, including a barbell,
on the weight rests and spotter bars.
ll l
l l
ll
l l l ll l
Weight Capacity:
Pull Up Station: Max. 330kg
Weight Rests: Max. 300kg
Spotter Bars: Max. 300kg
05www.viavito.com
R
Warning Decal Placement
Pull-up Bar
Barbell Rest
Barbell Spotter
Rear Upright
Front Upright
Length: 128 cm
Width: 124 cm
Height: 210 cm
Support Frame
06 www.viavito.com
R
Thank you for selecting the Viavito PC1000 GT power cage. This manual will guide you
through the assembly process.
Assembly
Product Overview
M10 Washer (13)
M10 Locknut (14)
M10 x 70mm Bolt (12)
07
www.viavito.com
Parts Identication Chart
R
Refer to the drawings below to identify small parts used in assembly. The number in
brackets by each drawing is the key number of the part, from the Parts List on page 21.
Note: Some small parts may have been preattached. If a part is not in the hardware
kit, check if it has been preattached.
08 www.viavito.com
R
Before You Begin
Before beginning assembly, carefully
read the following information and
instructions:
• The power cage must be assembled by 3
adults on a clear, level surface.
• Because of its weight and size, assemble
the power cage in the location where it will
be used. Make sure that there is enough
clearance to walk around the weight
system.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of
the packing materials until you complete all
assembly steps.
• For help identifying small parts, use the
PART IDENTIFICATION CHART on page 07.
Assembly requires the following tools
(not included):
- 2 adjustable wrenches
- 1 rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not
use power tools.
5
5
3
3
8
14
14
14
13
12
12
Decal
Decal
9
9
9
9
09
www.viavito.com
Assembly Instructions
Step One.
01 Orient the Bases (5) and Support Frame
(8) as shown.
02 Orient the Bases (5) so that the decals
are in the position shown.
03 Attach the End Caps (9) to Bases (5).
04 Attach the Support Frame (8) and one
Rear Upright (3) to the Base (5) with
four M10 x 70mm Bolts (12), two M10
Washers (13) and four M10 Locknuts (14).
Do not fully tighten the Locknuts yet.
05 Repeat to complete the assembly of
another side.
R
Please Note: Hand tighten bolts and locknuts until the machine is fully assembled.
Locknuts may require additional force to tighten completely.
4
4
12
12
5
5
14
14
10 www.viavito.com
R
Step Two.
01 Attach two Front Uprights (4) to two Bases (5) with four M10 x 70mm Bolts (12) and
four M10 Locknuts (14). Do not fully tighten the Locknuts yet.
Ce manuel convient aux modèles suivants
1
Table des matières
