Viavi Smart Class 4800 Manuel utilisateur

Smart Class 4800/4800P Quick Start Guide

July 2017 22122291, Rev. 000 Page 1

Smart Class 4800/4800P Quick Start

Guide

Thank you for purchasing a Smart Class 4800 or 4800P. This guide provides informa-

tion on how to get started testing with the instrument.

Unpacking and inspecting the components

Before using the instrument for the first time, please inspect the unit and components

to verify that no damage occurred during shipping.

When unpacking the components, verify that all the items you ordered are included in

the package. Accessories may be shipped in a separate box. After you unpack the

components,examine the connectors,ports, LEDs,and screen for damage. Be sure to

check the top, bottom, and front panels. If you find damage, contact Viavi Customer

Care at 1-844-GO-VIAVI (+1-844-468-4284) or at www.viavisolutions.com. If you don’t

find any damage, consider saving the box and packing materials.

About the Smart Class 4800 and 4800P

The Smart Class 4800 and 4800P instruments are designed to be rugged, portable,

battery-operated test solutions that facilitate the quick turn-up and troubleshooting of

multiple services and network elements in the Metro and Core network.

Figure 1 Smart Class 4800

About the Smart Class 4800 and 4800P

Smart Class 4800/4800P Quick Start Guide

July 2017 22122291, Rev. 000 Page 2

Powering the instrument

Power is supplied by the battery or the AC power adapter provided with the instrument

that was shipped to you.

Turning the instrument on or off

To turn the power on or off:

– Press the ON/OFF key.

If powering up, power key illuminates green.

If powering down, you must press the ON/OFF key for one second. After the confirma-

tion message appears, select Yes to power down. The instrument saves the current

settings and then shuts down. The next power up will return to the last test running.I

Charging the battery

In most instances, the battery charges automatically when you supply power to the unit

using the AC power adapter.

Exploring the Smart Class 4800 and 4800P

The connector panel of the SC 4800 provides the internal connectors and SFP connec-

tors used to connect the instrument to the circuit for testing. After selecting a test appli-

cation, LEDs illuminate indicating which connectors to use for your test. Figure 2 and

Figure 3 on page 3 show the connector panels for SC 4800 and 4800P respectively.

Refer to “Exploring the T-BERD ⁄MTS 5800 and SC 4800“ in the Getting Started Guide

for detailed connector specifications.

Figure 2 Connector panel, top of SC 4800

NOTE:

Pressing the power button for more than four seconds causes a hard shut-down.

The current settings are not saved. The next power up launches the first available

test.

About the Smart Class 4800 and 4800P

Smart Class 4800/4800P Quick Start Guide

July 2017 22122291, Rev. 000 Page 3

Figure 3 Connector panel, top of SC 4800P

Navigating the user interface

The user interface lets you set up the instrument, configure tests, and display test

results. See Figure 4

Figure 4 Main screen (Ethernet application)

System and Test Icons

–UsetheSystem icon to access the system settings (such as setting the date

and time, and managing files).

– Use the Test icon to access the test applications.

Menu Bar

The menu bar provides the following icons: Reports, Tools, View, Help.

About the Smart Class 4800 and 4800P

Smart Class 4800/4800P Quick Start Guide

July 2017 22122291, Rev. 000 Page 4

Test Tabs

The test tabs appear near the top of the Main screen.

Test Status

The test status of the currently selected test is displayed in the upper left. Icons similar

to a DVD or audio player indicate the status: the “Play” icon indicates a test is running;

“Pause”appears whenrunning adelayed-starttimedtest, and“Stop”appearswhen the

test is stopped.

Application Buttons

The buttons located on the right side of the graphical user interface allow access to the

setup screens, restart tests, and perform other functions specific to your test applica-

tion.

The top button (Setup/Results) is used to toggle between the Setup screens and the

Main (Result) screen. When the Main screen is displayed, the Setup button appears;

when the setup screens are displayed, the Results button appears.

A Restart button is also provided which allows you to restart a test (and clear results).

Additional buttons appear when appropriate for the test application you select. For

example, if you select a Layer 4 MultipleStreams Ethernet application, a Toolkit button

is provided which allows you to run a variety of scripts designed to simplify testing.

For descriptions of setup parameters, refer to the testing manual.

Message Bar

The message bar displays the current test application selected on the unit.

Ifyourinstrument is configuredwithtwo portsfora particularrate,thecurrentlyselected

port also appears at the beginning of the message.

Various other messages may appear briefly, for example, to alert you that loop ups are

successful. You can display a log of messages by selecting the message area.

Quick Config Settings

After you select a test application (using the Test menu), Quick Config tabs appear

under the Test Tabs, with key settings required to configure your test. For example, if

you selected the 1GE -> Layer 2 -> Traffic -> Term application, quick configuration

settings appear that allow you to easily select Auto Negotiate, Test Mode, and Frame

Size.

About the Smart Class 4800 and 4800P

Smart Class 4800/4800P Quick Start Guide

July 2017 22122291, Rev. 000 Page 5

LED Panel

The LEDs in the panel to the left of the Results Windows help you determine whether

a signal is present, pattern synchronization has been achieved, and other key events

when performing tests.

You can collapse and expand an LED panel by tapping the panel name (for example,

Ethernet).

For descriptions of each of the LEDs, refer to the Test Results chapter in the testing

manual that shipped with your instrument.

The round LEDs on the inside column provide the current state of the key event; the

square LEDs on the outside column provide the historical state (in other words, the

event occurred in the past).

Green LEDs indicate an event occurred as expected, yellow LEDs indicate that an

event occurred that warrants additional investigation, and red LEDs indicate that an

error, anomaly, alarm, or defect has occurred.

Actions Panel

After you select a test application (using the Test menu), an Actions Panel appears

under the LED display that provides tabs with the buttons required to perform your test.

The buttons available vary depending on the test application you select. For example,

buttons may appear that allow you to start and stop transmitting Ethernet traffic, and

start and stop a local loopback.

A blinking circle on a tab indicates that some action is required on your part. For

example, if you are running a BERT test, the Actions tab may blink indicating that you

need to start transmitting the BERT pattern.

If you select a test application for an optical rate, a Laser / Tx Signal tab also appears,

with buttons that allow you to select an SFP connector for the test (if appropriate), and

turn the laser on and off.

Results Buttons

Group and Category buttons are provided at the top of each result window. The Group

button on the left allows you to select the type of results you want to observe (for

example, Summary results); the Category button on the right allows you to select a

specific results category for the group you specified. By selecting a different group or

category for each pane, you can view multiple sets of results at the same time.

Results Windows

The test results appear in Result Windows.

Errors are highlighted in red; other results appear in black.

About the Smart Class 4800 and 4800P

Smart Class 4800/4800P Quick Start Guide

July 2017 22122291, Rev. 000 Page 6

You can change the layout of the Result Windows using options provided on the View

menu. You can also choose to show just test results on the main screen by selecting

View > Show Only Results.

For test result descriptions, refer to the Test Results chapter in the Testing Guide for the

interface you are testing.

Additional Documentation

For more detailed information on using the T-BERD/MTS/SC family of testers, please

refer to the manuals on the USB memory stick, included in the shipment.

T-BERD/MTS/SC Getting Started Guide

T-BERD/MTS/SC Ethernet and Fibre Channel Testing Manual

T-BERD/MTS/SC SONET/SDH, OTN and PDH Testing Manual

About the Smart Class 4800 and 4800P

Viavi Solutions

1-844-GO-VIAVI

www.viavisolutions.com

Government purposes only. All other trademarks and registered trademarks are the property of their respective owners. Specifications, terms,

and conditions are subject to change without notice.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Viavi Équipement de test

Viavi

Viavi 3900 Series Manuel du propriétaire

Viavi

Viavi T-BERD/MTS-5800 Manuel de la liste des pièces

Viavi

Viavi 3550 Manuel utilisateur

Viavi

Viavi SmartOTDR 100 Manuel utilisateur

Viavi

Viavi OLA-54 Manuel utilisateur

Viavi

Viavi FBP-HD4iP Manuel utilisateur

Viavi

Viavi ONX 580 Manuel utilisateur

Viavi

Viavi AVX-10K Manuel utilisateur

Viavi

Viavi OneExpert DSL ONX-580 Manuel utilisateur

Viavi

Viavi T-BERD/MTS 5800 Manuel utilisateur

Viavi

Viavi T-BERD MTS 5800 Manuel de la liste des pièces

Viavi

Viavi E4100 Series Manuel de la liste des pièces

Viavi

Viavi 4100 Series Manuel de la liste des pièces

Viavi

Viavi ONX 580 Manuel utilisateur

Viavi

Viavi SmartClass Fiber OLTS-85 Manuel utilisateur

Viavi

Viavi 3550 Manuel du propriétaire

Viavi

Viavi OneAdvisor ONA-800 Manuel de la liste des pièces

Viavi

Viavi NSC-200 Manuel utilisateur

Viavi

Viavi T-BERD MTS 5800 Manuel de la liste des pièces

Viavi

Viavi SmartClass FBP-OLP-82 Manuel utilisateur

Viavi

Viavi HST-3000 Manuel de la liste des pièces

Viavi

Viavi T-BERD 5800 Manuel de la liste des pièces

Viavi

Viavi IFR 6000 Manuel utilisateur

Viavi

Viavi ComXpert CX100 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur