ViaSat VBM-1400 Manuel utilisateur
Technical Manuals Hard Copy Production Specifications
Standard Manuals (8-1/2 x 11, 3-Hole Punch)
For hard copy, this technical manual should be produced using the following specifications:
-Input – Electronic Adobe® Acrobat PDF file
-Reproduction method - Digital laser copy machine
-Paper media – 8-1/2 x 11 - 60 pound offset white paper, standard 3-hole drill or punch.
Fan-fold any 11 x 17 foldout drawings.
-2-sided (double-sided) copy with alternating odd/even page numbers.
-Any print exposed to plastic binder surfaces (cover page, spine, title page) shall not rub off, or stick
to the plastic surface over time
-Shrink wrap all pages except cover page, spine, and diskette holder page
-Binder shall be white loose-leaf Vu-Binder with pockets inside on each cover
-Binder shall be of appropriate thickness (min. ½ in.) to accommodate addition of 10 additional
sheets (20 pages) but no more than 40 sheets (80 pages) if required
-Cover page and spine inserts - 67 pound vellum bristol, pastel blue in color
-Binder to have front cover page and spine inserted with copy
-First article printed shall be page-checked for correct format and legibility by ViaSat. The printing
service provider shall randomly check additional copies for correct format and legibility.
Do not insert this sheet in the printed manual.
This sheet is provided for printing and assembly instructions only.
Broadband
Modulator
VBM-1400
Installation and
User’s Guide
ViaSat Document Number
1018360
(Rev. 002)
ViaSat, Inc.
6155 El Camino Real
Carlsbad, CA 92009-1699
Tel: (760) 476-2200
Fax: (760) 929-3941
www.viasat.com
Broadband Modulator, VBM-1400
Installation and User’s Guide
Broadband
Modulator
VBM-1400
Installation and User’s
Guide
ViaSat Document Number
1018360
(Rev. 002)
ViaSat, Inc.
6155 El Camino Real
Carlsbad, CA 92009-1699
Tel: (760) 476-2200
Fax: (760) 929-3941
www.viasat.com
REGULATORY COMPLIANCE and NOTICES
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, of the
FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Any changes or modifications not expressly approved in writing by the manufacturer could void the user’s authority to
operate the equipment.
CAUTION: Shielded I/O cables must be used and all covers must be in place when operating this equipment.
Canadian Department of Communications compliance statement:
This equipment does not exceed Class A limits per radio noise emissions for digital apparatus set out in the Radio
Interference Regulation of the Canadian Department of Communications. Operation in a residential area may cause
unacceptable interference to radio and TV reception requiring the owner or operator to take whatever steps are necessary to
correct the interference.
Avis de conformite aux normes du ministere des Communications du Canada:
Cet equipment ne dépasse pas les limites de Class A d’émission de bruits radioélectriques pour les appareils numériques
tels que prescrites par le Règlement sur le brouillage radioélectrique etabli par le ministére de Communications du Canada.
L’exploitation faite en milieu résidentiel peut entrainer le brouillage des réceptions radio et télé, ce qui obligerait le
propriétaire ou l’operateur à prendre les dispositions nécessaires pour en éliminer les causes.
Electro-Magnetic Emissions Compliance
The equipment has been tested and is in compliance with the following emissions and immunity requirements:
Emissions:
FCC 15B, Sec. 107, Class “A ” Conducted Emissions
FCC 15B, Sec. 109, Class “A” Radiated Emissions
EN 55022 (1998)A1, Class “A” Conducted Emissions
EN 55022 (1998)A1, Class “A” Telecom Conducted Emissions
EN 55022 (1998)A1, Class “A” Radiated Emissions
EN 61000-3-2 (2000) Power Line Harmonics
EN 61000-3-3 (1995) Power Line Flicker
Immunity:
IEC 61000-4-2 (1995),A1(1998),A2(2000) ESD Immunity
IEC 61000-4-3 (2002),A1(2002) Radio Frequency Immunity
IEC 61000-4-4 (1995)A1(2000),A2(2001) Electrical Fast Transient Immunity
IEC 61000-4-5 (1995),A1(2001) Surge Immunity
IEC 61000-4-6 (1996)A1(2000) RF Common Mode Immunity
IEC 61000-4-8 (1993)A1(2000) Power Frequency Magnetic Field
IEC 61000-4-11(2001) Voltage Dips and Short Interruptions
Safety Compliance
The equipment has been tested and is in compliance with the following safety requirements:
IEC 60950-1 (ed.1) IECEE CB Scheme
COPYRIGHT NOTICE
©Copyright 2004, 2005, ViaSat, Inc. All rights reserved.
Printed in the United States of America
TRADEMARK NOTICE
ViaSat and the ViaSat logo are registered trademarks of ViaSat, Inc. in the U.S. and/or other countries. Other
product names included in this document are trademarks of their respective owners.
DOCUMENTATION NOTICE
The information, specifications, and features contained in this document are subject to change without notice
and should not be construed as a commitment by ViaSat, Inc.
ViaSat, Inc. assumes no responsibility for any errors that may appear in this document nor does it make
expressed or implied warranty of any kind with regard to this material, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. ViaSat, Inc. shall not be liable
for incidental or consequential damages in conjunction with, or arising out of the furnishing, performance, or
use of this document and the program material it describes.
-------------------------------------------------------
Table des matières
