VIA Technologies SOM-7000 Manuel utilisateur
QUICK START GUIDE
VIA SOM-7000 Starter Kit
Fanless low-power Edge AI plaorm with
Octa-Core MediaTek Genio 1200 processor
1.00-26092023
Copyright
Copyright ©2023 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmied, transcribed, stored in a retrieval system, or translated into any language, in any
form or by any means, electronic, mechanical, magnec, opcal, chemical, manual or otherwise without the prior wrien permission of
VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respecve holders.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no warranes,
implied or otherwise, in regard to this document and to the products described in this document. The informaon provided in this
document is believed to be accurate and reliable as of the publicaon date of this document. However, VIA Technologies assumes no
responsibility for the use or misuse of the informaon (including use or connecon of extra device/equipment/add-on card) in this
document and for any patent infringements that may arise from the use of this document. The informaon and product specicaons
within this document are subject to change at any me, without noce and without obligaon to nofy any person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any me without prior noce.
Regulatory Compliance
FCC-A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protecon against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference, in which case the user will be required to correct the interference at his personal expense.
Noce 1
The changes or modicaons not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Noce 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
Noce 3
The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conicts or
damages arising from incompability of the product. Check compability issue with your local sales representaves before placing an
order.
iii
VIA SOM-7000 Starter Kit Quick Start Guide
Safety Precauons
• Always read the safety instrucons carefully.
• Keep this document for future reference.
• All cauons and warnings on the equipment should be noted.
• Keep this equipment away from humidity.
• Put this equipment on a reliable at surface before seng it up.
• Check the voltage of the power source and adjust to 110/220V before connecng the equipment to
the power inlet.
• Do not place the power cord where people will step on it.
• Always unplug the power cord before inserng any add-on card or module.
• If any of the following situaons arise, get the equipment checked by authorized service personnel:
− The power cable is damaged.
− Liquid has entered into the equipment.
− The equipment has been exposed to moisture.
− The equipment is faulty or you cannot get it work according to User’s Manual.
− The equipment has been dropped and damaged.
− The equipment has an obvious sign of breakage.
• Do not leave this equipment in extreme temperatures or in a storage temperature above 60°C (140°F).
. The equipment may be damaged.
• Do not leave this equipment in direct sunlight.
• Never pour any liquid into the opening. Liquid can cause damage or electrical shock.
• Do not place anything over the power cable.
• Do not cover the venlaon holes. The openings on the enclosure protect the equipment from
overheang.
iv
VIA SOM-7000 Starter Kit Quick Start Guide
Packing List
Items for STK-SOM700-00A0
• 1 x VIA SOM-7000 module
• 1 x VIA SOMDB7 reference carrier board
• 1 x Heatsink
• 1 x Audio cable
• 1 x Power cable
• 1 x Debug console cable
Ordering Informaon
Part Number SoC Frequency Descripon
10GPZ22M30020 MediaTek Genio 1200
Octa-Core SoC @
2.2GHz/2.0GHz
VIA SOM-7000 module with 2.2/2.0GHz MediaTek Genio 1200
Octa-Core SoC, 16GB eMMC, 4GB LPDDR4 SDRAM, CSI, audio
(headphone out and MIC-in), Wi-Fi 6+ Bluetooth 5.2, 3 Wi-Fi/
Bluetooth antenna I-PEX connectors
STK-SOM700-00A0 VIA SOM-7000 starter kit with VIA SOM-7000 module, VIA
SOMDB7 reference carrier board and accessory kit
Oponal Accessories
Development Opons
Part Number Descripon
SOM-ACK-00A0 Development Pack including 5MP CMOS camera, Wi-FI/BT antenna and 12V 3A
worldwide AC adapter
99G47-01025F 10.1" 1920x1200 MIPI LCD + touch panel display
Wireless Module Opons
Part Number Descripon
EMIO-2576-00A0 4G LTE mobile broadband M.2 module with two antennas and assembly
v
VIA SOM-7000 Starter Kit Quick Start Guide
Table of Contents
1. Overview ........................................................................................................................................................ 1
2. Hardware Installaon ..................................................................................................................................... 1
2.1 Installing the Audio Cable ..................................................................................................................... 2
2.2 Connecng the Debug Console Cable................................................................................................... 2
2.3 Power Cable .......................................................................................................................................... 3
Appendix A Recommended Mang/Unmang Jig............................................................................................. 4
A.1 Jig Dimensions ...................................................................................................................................... 4
A.2 Mang Method of Plug Connector ....................................................................................................... 4
Appendix B Oponal Accessories ...................................................................................................................... 5
B.1 Development Pack ................................................................................................................................ 5
B.1.1 Connecng the Camera Module.................................................................................................... 5
B.1.2 Connecng the Bluetooth and Wi-Fi Antennas ............................................................................. 7
B.1.3 Connecng the Power Adapter...................................................................................................... 8
B.2 Installing the 10.1" MIPI LCD & Touch Panel Display ............................................................................ 9
B.3 Installing the 4G LTE M.2 Wireless Module Kit ................................................................................... 11
B.3.1 Installing the SIM Card................................................................................................................. 12
vi
VIA SOM-7000 Starter Kit Quick Start Guide
List of Figures
Figure 01: Audio cable........................................................................................................................................... 1
Figure 02: Debug console cable............................................................................................................................. 1
Figure 03: Power cable .......................................................................................................................................... 1
Figure 04: Connecng the audio cable between the module and the carrier board ............................................ 2
Figure 05: Connecng the debug console cable between the VIA SOMDB7 carrier board and a developer PC... 2
Figure 06: Connecng the power cable to the VIA SOMDB7 carrier board and a power adapter ........................ 3
Figure 07: Mang/Unmang jig dimensions......................................................................................................... 4
Figure 08: Mang the plug connector with the I-PEX connector ......................................................................... 4
Figure 09: Development pack................................................................................................................................ 5
Figure 10: Li the lock of the MIPI CSI connector 'CSI2'........................................................................................ 6
Figure 11: Insert camera module's FPC cable and push down the 'CSI2' connector's lock ................................... 6
Figure 12: Connecng a Wi-Fi/Bluetooth antenna to the Bluetooth antenna connector .................................... 7
Figure 13: Connecng Wi-Fi/Bluetooth antennas to the Wi-Fi antenna connectors ............................................ 7
Figure 14: Connecng the power adapter to the VIA SOMDB7 carrier board ...................................................... 8
Figure 15: 10.1" 1920x1200 MIPI LCD and touch panel display ............................................................................ 9
Figure 16: Li the 'JTOUCH1' and 'JDSI1' connectors' locks .................................................................................. 9
Figure 17: Insert LCD touch panel display's FPC cable and push down the 'JTOUCH1' connector's lock ............ 10
Figure 18: Insert LCD touch panel display's FFC cable and push down the 'JDSI1' connector's lock................... 10
Figure 19: 4G LTE wireless module accessory kit................................................................................................. 11
Figure 20: Installing the 4G LTE module on the carrier board ............................................................................. 11
Figure 21: Connecng the antenna on the 4G LTE module ................................................................................. 12
Figure 22: Installing the SIM card ........................................................................................................................ 12
1
VIA SOM-7000 Starter Kit Quick Start Guide
1. Overview
This guide introduces and describes how to install the standard and oponal accessories available for the VIA
SOM-7000 starter kit, which provides a base package for tesng and evaluang the VIA SOM-7000 module with
the VIA SOMDB7 carrier board.
Notes:
1. The operang temperature 0oC ~ 60oCis a result of tesng performed in a tesng chamber, and a number of
variables can inuence this result. Please note that the working temperature may vary depending on the actual
situaon and environment. It is highly recommended to execute a solid tesng program and take all variables
into consideraon when building the system. Please ensure that the system is stable under the required
operang temperature in terms of the target applicaon.
2. Please note that the lifespan of the onboard eMMC memory chip may vary depending on the amount of
access. More frequent and larger data access on the eMMC memory will shorten its lifespan. It is highly
recommended to use a replaceable external storage (e.g., MicroSD card) for large data access.
2. Hardware Installaon
This secon introduces and describes how to install the following standard accessories bundled in the VIA
SOM-7000 starter kit:
1. Audio cable
Figure 01: Audio cable
2. Debug console cable
Figure 02: Debug console cable
3. Power cable
Figure 03: Power cable
2
VIA SOM-7000 Starter Kit Quick Start Guide
2.1 Installing the Audio Cable
Connect one end of the audio cable to the VIA SOM-7000 module's audio-out connector and the other end of
the cable to the VIA SOMDB7 carrier board's audio-in connector.
Audio cable connected to module
Audio cable connected to carrier board
Figure 04: Connecng the audio cable between the module and the carrier board
2.2 Connecng the Debug Console Cable
Follow the steps below to connect the debug console cable between the VIA SOM-7000 starter kit and a
developer PC:
Step 1
Connect the white connector of the debug console cable to the debug console connector labeled 'J14' on the
boom layer of the VIA SOMDB7 carrier board.
Step 2
Connect the opposite end of the debug console cable to the developer PC's RS232 D-sub serial port.
Debug console cable
connected to carrier board
Connect debug cable to developer PC
Figure 05: Connecng the debug console cable between the VIA SOMDB7 carrier board and a developer PC
3
VIA SOM-7000 Starter Kit Quick Start Guide
2.3 Power Cable
Follow the steps below to connect the power cable between the VIA SOM-7000 starter kit and a power source:
Step 1
Connect the black connector of the power cable to the DC-in power connector labeled 'J7' on the top layer of
the VIA SOMDB7 carrier board.
Step 2
Connect a 12V power adapter to the opposite DC-in jack end of the power cable.
Note:
A power adapter is not provided in the VIA SOM-7000 starter kit. A 12V 3A power adapter is bundled in the
developer pack described in Appendix secon B.1.
Power cable connected to
carrier board
Connect power cable to a power adapter
Figure 06: Connecng the power cable to the VIA SOMDB7 carrier board and a power adapter
Step 3
Connect the power adapter to a compable power source.
4
VIA SOM-7000 Starter Kit Quick Start Guide
Appendix A Recommended Mang/
Unmang Jig
A.1 Jig Dimensions
Figure 07: Mang/Unmang jig dimensions
A.2 Mang Method of Plug Connector
Using the jig, align the plug connector with the micro-miniature RF antenna connector (I-PEX). Then push down
gently unl the plug connector is fully connected. The recommended force is 30N (maximum).
Figure 08: Mang the plug connector with the I-PEX connector
Autres manuels pour SOM-7000
1
Table des matières
Autres manuels VIA Technologies Contrôleurs
