VEVOR LD9YV0 Manuel utilisateur
Technical Support and E-Warranty Certificate
www.vevor.com/support
THRESHOLD RAMP
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Model: LD9YV0 /LYIMV0 /Z2UAV0 /GRBRV0 /OVUSV0 /SNPTV0
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
THRESHOLD RAMP
1. Safety Instructions
WARNING:
Carefully read and understand instructions and procedures before
installing and using the threshold ramp.
Do not modify the threshold ramp design.
• Do not move a threshold ramp while standing on it.
• Do not use it in bad weather, such as wind, rain, snow, and so on. It is
recommended to use the ladder in clear weather.
1．During installation, please wear gloves to prevent hand injuries.
2．Do not stack items or allow children to play on the ramp.
3．Regularly check the structure and fasteners of the ramp to ensure its
stability and safety.
4．If the surface of the ramp is worn or damaged, please replace or repair
it in time.
2. Maintenance Guide
1. Place the product on a sturdy, secure, accessible, and level starting
point. The minimum weight capacity of the starting point must be equal to
that of the ramp (800 lbs). Do not exceed the maximum weight capacity of
the product.
2. Ensure that the product is securely flush against the starting point. If a
safe, accessible, and level starting point cannot be found, or if the product
does not fit securely against a higher starting point, do not use the ramp.
3. Do not tamper with, attempt to repair, or modify any part of the product.
Exercise caution to avoid pinch points during assembly and handling.
4. If using the product with other mobility equipment, refer to the user
guide of the equipment to understand the acceptable usage guidelines,
including appropriate slope, incline, and chair direction. Do not exceed the
recommendations of the mobility equipment.
5．Before each use, carefully inspect the fasteners on the ramp to ensure
they are not loose. Tighten any loose fasteners if necessary.
6．When using the ramp, ensure it is securely flush against the starting
point to ensure safety.
7．Before each use, clean the ramp surface of ice, snow, dust, leaves, and
other debris. Remove accumulated ice and snow, and sweep the surface
clean. For dust and debris, use a soft bristle brush and non-alkaline
detergent to clean the ramp surface, then rinse thoroughly.
8．The ramp surface may become slippery in wet conditions. Walk with
caution and pay attention to your footing to prevent slipping.
9．If the ramp will not be used for an extended period, store it in a dry and
well-ventilated area away from direct sunlight.
SAVE THESE INSTRUCTIONS
3. Product Description and Main Features
The threshold interlocking aluminum alloy ramp is made of high-quality
aluminum alloy extrusion. This product is durable and provides
convenience for people. It is lightweight, portable, stable, and durable and
features an interlocking design for easy installation and storage.
Main Features:
1. Material: High-strength aluminum alloy, extruded.
2. Surface: Anti-slip treatment, deburring.
3. Interlocking design: Each section’s interface is precisely designed;
align each section's interface and push them together for installation.
4. Load limit: Up to 800 lbs.
5. Height optional: suitable for thresholds of different heights.
4. Product Parameter
Item
Model
Picture
Height
Load Limit
N.W
G.W
1
LD9YV0
1inch
800lbs
1.9kg
2.6kg
2
LYIMV0
2inch
800lbs
3.6kg
4.4kg
3
Z2UAV0
3inch
800lbs
5.4kg
6.25kg
4
GRBRV0
4inch
800lbs
7.35kg
8.35kg
5
OVUSV0
5inch
800lbs
9.4kg
10.5g
6
SNPTV0
6inch
800lbs
11.7kg
12.55kg
5. Installation Guide
(1) Before starting the installation, please wear gloves to protect your
hands.
(2) Choose an appropriate installation location, ensuring that the
ground is level and firm.
(3) Align and interlock each section of the ramp together until all parts
are even.
(4) Starting with the 1” extension, install the threshold extensions in
the order shown (FIG. 1) until the final height is reached. Bring the
threshold extensions together at an approximate 45° angle, then
rotate them into place after the bulb is engaged in the slot。
（5）Use the provided screws to tighten each section of the ramp to
ensure that the ramp does not slip out or make noise during use.
(5) After installation, check whether the ramp is stable and tightly
attached to the ground.
(6) When using the ramp, push the equipment up and down the ramp
steadily, avoiding sharp turns or speeding.
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The
Pavilions Preston, United Kingdom
Made In China
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels VEVOR Échelle
