VEVOR BLC9010 Manuel utilisateur
Technical Support and E-Warranty Certificate www.vevor.com/support
Multi-function Tool Stool
MODEL:BLC9010
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:BLC9010
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Multi-function
Tool Stool
- 2 -
SAFETY PRECAUTIONS
WARNING:
Read this material before using this product. Failure to do so can
result in serious injury.
Assembly precautions
1.Assemble only according to these instructions. Improper assembly
can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3.Keep the assembly area clean and well-lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Product capabilities apply to properly and completely assembled
product only.
7.Assemble on a flat, level, hard, and smooth surface capable of
safely supporting a fully loaded seat.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near
this item.
3. Do not exceed weight capacities, evenly distributed from the
bottom up. Be aware of dynamic loading! The sudden load
movement may briefly create an excess load, causing product failure.
4. Use only on a flat, level, hard, and smooth surface capable of
safely supporting a fully loaded seat.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
- 3 -
TECHNICA PARAMETERS
Model
BLC9010
Rated Load（kg）
300lbs
Product weight（kg）
5.6
Product size（mm）
670*340*390
Essential tools for auto beauty and mechanical repair
The multi-function tool stool is equipped with a slidable chassis storage
rack and two bottle racks for all of your car cleaning supplies, allowing
you to easily clean the wheels without having to bend frequently to add
pressure to the back and knees.
Suitable for DIY work items in garages, workshops or homes-the
multi-function tool stool is equipped with durable casters and rubber
wheels to allow you to slide easily and quickly in the garage or driveway.
Match the perfect height of the car's side decoration or wheel
cleaning-sit down to complete the low-altitude work of car quick beauty,
polishing, waxing, ceramic coating, mechanical maintenance, wheel
cleaning, tire and rubber. Cleaning, plastic repair, etc., without standing or
bending over to reduce pressure on your back or knees.
Convenient storage space-there is a storage drawer and two side
storage trays under the seat to easily store car cleaning tools such as
spray bottles, sealants, microfiber towels, sponges, applicators, etc.,so
that you can carry it with you when you work.
- 4 -
Features:
1. Rubber wheel casters with lock.
2. Storage tray for storing towel s, small brushes, and tools.
3. Can hold 4 bottles of 16OZ for easy access.
4. Maximum weight 300LB.
5. 2512”× 13”x 12”.
INSTRUCTION FOR USE
1. Tool Tray-(2 pieces)
2. Underside Frame & Wheel Assembly -(2 sets)
3.M6×45 Screw-(4 units)
4. M6 Washer-(8 units)
5. M6 Nylon Nut-(4 units)
6.M8 Washer-(4 units)
7.M8 Nut-(4 units)
Insert the wheels into the underside frame and fix them with M8
nuts(7) and washers(6).
Use M6 screws(3), M6 Washer(4)and M6 Nyloc nut (5) to mount the
- 5 -
underside frame to the stool.
Insert the tray at an angle and press down to secure it to the beam.
The tray is installed along the inner side of the stool and tilted
towards the inside until the inner side of the tray bears against the
inner card position of the stool.
Press the tray inward and downward with slight force until the slot at
the bottom of the tray snaps into the metal frame, and a slight "bang"
sound indicates that the tray has been installed in place.
Made In China
Table des matières
Autres manuels VEVOR Mobilier d'intérieur
VEVOR
VEVOR ZWE-DDJ-SS-01 Manuel utilisateur
VEVOR
VEVOR WGS-50 Manuel utilisateur
VEVOR
VEVOR SR191276 Manuel utilisateur
VEVOR
VEVOR YF-003 Manuel utilisateur
VEVOR
VEVOR AP-SS-004 Manuel utilisateur
VEVOR
VEVOR JYD-114 Manuel utilisateur
VEVOR
VEVOR T10570 Manuel utilisateur
VEVOR
VEVOR WC30 Manuel utilisateur
VEVOR
VEVOR LDH07 Manuel utilisateur
VEVOR
VEVOR DESK CONVERTER ZWE-ZSZ-02 Manuel utilisateur
VEVOR
VEVOR SR221265 Manuel utilisateur
VEVOR
VEVOR ZWE-ZSZ-01 Manuel utilisateur
VEVOR
VEVOR WMSL16 Manuel utilisateur
VEVOR
VEVOR GSC4200 Manuel utilisateur
VEVOR
VEVOR EEV0 Manuel utilisateur
VEVOR
VEVOR HZS003 Manuel utilisateur
VEVOR
VEVOR YX-K450-100 Manuel utilisateur
VEVOR
VEVOR HZR001 Manuel utilisateur
VEVOR
VEVOR SR221264 Manuel utilisateur
VEVOR
VEVOR MST003-2 / PST001 Manuel utilisateur
