Meditell 2 User Manual VI49.2
- 7 -
4.0 Operation
The Meditell 2 system a very simple to use and operating, this section details how it would be used in the normal
daily operation, how to generate a call, how to reset a call, how to mute a call.
4.1 Generate a Call Alarm Using a Ceiling Pull Cord Device.
1, Locate a ceiling pull cord device.
2, Pull on the cord using one of the activation aid handles.
3, The Indicator Mounted on the Call Device will illuminate and the buzzer will sound.
4.2 Mute a Call Alarm at the ECU
1, Locate the Meditell 2 Electronic Control Unit (ECU)
2, Briefly press the Mute / Reset button, for around a half a second.
3, The ECU internal buzzer will be muted. (The remote devices will not be muted)
The ECU Red Call LED will continue to flash
The Field audible and Visual Warning Devices will continue to in alarm.
4, The ECU internal Buzzer will continue to briefly bleep once every 10 seconds, until the alarm is reset.
4.3 Reset a Call Alarm using a “Remote Reset Device”
1, Locate a “Remote Reset Device”
2, Press the Reset Button for around 1 second.
3, The Call Alarm is reset,
All Field devices are silenced,
4, The field warning devices will and the ECU buzzer will bleep twice to confirm successful reset.
4.4 Reset a Call Alarm using ECU
1, Locate the Electronic Control Unit. (ECU).
2, Press and hold the Reset Button until the system is reset (aprox. 2 seconds)
3, The Call Alarm is reset,
All Field devices are silenced,
4, The field warning devices will and the ECU buzzer will bleep twice to confirm successful reset.
4.5 System Test/Reset
1, Locate the Electronic Control Unit. (ECU).
2, Press and hold “Reset / Mute” Button for around a 3 seconds.
3, The Electronic Control Unit will begin the self test sequence.
4, The field warning devices will and the ECU buzzer will bleep twice to confirm successful reset.
