Ventair SUNB2000BL Manuel utilisateur

INSTRUCTION MANUAL

(This photo is for reference only; it does not mean you are purchasing an identical product.

Heater picture is for illustration purposes only. Styles may vary according to the model.)

Installation Manual, Rev 1.0

Models:

2000 watts:SUNB2000BL

CAUTION

Read Instructions Carefully

For Safe Installation and

Heater Operation

CONTENTS

•MAIN TECHNICAL DATA

•INSTALLATION CAUTION

•WALL/CEILING INSTALLATION

•PARASOL INSTALLATION

•TRIPOD INSTALLATION

•MAINTENANCE

•STORAGE AND DISPOSAL

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Ventair Heater. To ensure correct function and safety, please read all

instructions before using the product and keep all instructions for future reference.

WARNING

When using electrical appliances, basic safety precautions should always be followed to

reduce the risk of fire, electrical shock and personal injury.

MAIN TECHNICAL DATA

SUNB2000BL

Rated Voltage:

220 - 240V ~ 50Hz

Heater Power Input:

2000W

Dimensions:

460 x 113 x 190mm

Weight:

2.2 kg

BEFORE INSTALLATION CAUTION

IMPORTANT

HEATER INSTALLATION AND ELECTRICAL CONNECTION MUST

BE DONE BY A LICENSED ELECTRICIAN.

THE LAMP IS NOT A REPLACEABLE ITEM

The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the

heater can be dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to

persons and keep installation time to a minimum. Save these instructions for future use.

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.

We cannot be liable for any damages caused by failure to observe these instructions.

IMPORTANT:

1. Read all instructions before using this heater.

2. Remove the unit from its packaging and check to make sure it

is in good condition before using.

3. Do not let children play with packaging.

4. Check the household voltage to ensure it matches the heater’s

rated specification.

5. Check the power cord and plug (purchased separately)

carefully before using to ensure there is no damage.

6. Before working on the electrics, be sure to turn off the power.

When energizing the unit, be sure your hands are dry to

prevent electric shock.

7. This heater is hot when in use. To avoid burns, do not let bare

skin touch hot surfaces. Keep combustible materials, such as

furniture, pillows, bedding, papers, clothes, and curtains at

least 3 feet (0.9 m) from the front of the heater and keep them

away from the sides and rear.

8. Do not use near or in the immediate vicinity of a bath or

swimming pool or any wet areas.

9. To protect against electric shock, do not immerse cord or plug

in water or any other liquids.

10. Do not insert or allow foreign objects to enter any ventilation

openings, as this may cause an electric shock, fire or damage

to the heater.

11. Unplug the heater when not in use, if applicable.

12. Connect to properly grounded outlets only.

13. Always plug heaters directly into a wall outlet/receptacle.

Never use with an extension cord or relocatable power tap

(outlet/power strip).

14. Do not allow cord to overhang the counter top where it can be

easily pulled by children.

15. Do not put fingers or foreign objects into the grille while in

operation.

16. Do not leave the appliance unattended when in use.

17. No liability can be accepted for any damage caused by non-

compliance with these instructions or any other improper use

or mishandling.

18. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities

or lack of experience and knowledge unless they have been

given supervision or instruction concerning the use of the

appliance by a person responsible for their safety. Children

and vulnerable people should be supervised to ensure they do

not play with the appliance.

19. Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause fire,

electric shock, or injury to persons.

20. Do not operate any heater with a damaged cord or plug or

after the heater malfunctions, has been dropped or damaged

in any manner. Disconnect power at service panel and have

heater inspected by a reputable electrician before reusing. If

the supply cord is damaged in any way, it must be replaced by

the manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard.

21. Do not run cord under carpet. Do not cover cord with throw

rugs, runners, or similar coverings. Do not route cord under

furniture or appliances. Arrange cord away from traffic area

and where it will not be tripped over.

22. To disconnect heater, turn controls to off, then remove plug

from outlet.

23. To prevent overheating of this appliance, keep the air inlets

and outlets clean and free of anything that may cause

blockage. Check all inlets and outlets from time to time to

ensure it is clear of any dirt or dust accumulation. DO NOT

COVER.

24. Do not use it in areas where gasoline, paint, or flammable

liquids are used or stored.

25. Parts of the heater may exceed 200℃, contact with the heating

tube, reflector, or mental parts near the heating tube, may

cause severe burns. To avoid burns, do not let bare skin touch

hot surfaces.

26. NEVER place hands under the heating elements. ALWAYS

allow heating element to cool at least 10 minutes before

touching the heating tube or adjacent parts.

27. This product contains recyclable materials. Do not dispose

this product as unsorted municipal waste. Please contact your

local municipality for the nearest collection point.

28. The fireguard of this heater is intended to prevent direct

access to heating elements and must be in place when the

heater is in use.

29. The fireguard does not give full protection for young children

and for infirm persons.

WARNING

BEFORE INSTALLING THE HEATER, MAKE SURE YOU HAVE TURNED OFF THE MAIN ELECTRICITY SUPPLY.

DO NOT TURN IT BACK ON UNTIL THE HEATER IS FULLY INSTALLED AND READY TO USE.

ALL ELECTRICAL WORK MUST BE CARRIED OUT BY A LICENSED ELECTRICIAN IN ACCORDANCE WITH THE

LATEST WIRING REGULATIONS

INSTALLATION

Tools Needed:

•Pencil

•Hammer

•Level

•Screw Driver

•Power Drill and drill bits

A wall mounting bracket is provided with the heater which has been specifically designed to allow this

product to be fitted to a ceiling. Before drilling, ensure the holders for the ceiling are solid and that there are

no hidden water pipes or electric wires. The heater must be installed no less than 0.5m from side walls and

no less than 1.8m off the floor.

ATTENTION! The appliance must be installed on a solid surface like concrete, wood or

metal etc.

Important: Ensure that the supply cables are well mounted and that they do not come into

contact with the reflector of the heater or that it does not trail into heated areas. The supply

cable can be fixed to the metal mounting bracket behind the heater with plastic zip ties.

1. This heater should be installed by a qualified electrician.

2. Always disconnected the heater from the electricity supply and allow it to cool

before installation.

3. For ceiling mounting, the lowest part of the heater must be located at or above a

minimum height of 1.8m from ground level, so that the heater cannot be touched

when in operation.

4. For ceiling mounting, there must be a 1.8m distance from your appliance to the

ground.

5. When installed to the ceiling, there must be a distance of 0.5m between corners and

the appliance.

6. The distance of your appliance from any objects or persons is to be min 1m.

7. The distance from the front side of the heater to materials such as wood, cloth etc.,

must be min 1m.

8. When mounting to a ceiling, do not position the heater at an angle more than 90

degrees.

9. The supply cable must be at the lower end of the heater if it is installed at an angle

or vertically.

10.Keep the supply cord away from the body of the heater as it will get hot during use.

11.Do not install the heater on a flammable surface.

12.Observe the minimum safe distance between the heater body and the flammable

surfaces when mounted.

13.The heater should always have a minimum clearance of 0.5m from a ceiling and

adjacent wall.

14.If the heater is to be used outside, a weatherproof outlet is recommended.

15.Before drilling ensure that there are no wires or water pipes in the area where the

heater is to be installed.

16.The heater must be installed on the mounting brackets provided.

17.Fasten the brackets securely to the mounting surface and the backside of the heater

using the nuts and screws supplied.

18.Fasten the heater securely on the brackets using the nuts and bolts supplied.

19.The brackets can be used to adjust the direction of the heater, adjust the heater

angle by loosening the two bolts on the wall mounting bracket, and tighten the bolts

again when the desired angle is reached.

20.For bathrooms installation/s - the heater is to be installed so that switches and other

controls cannot be touched by a person in the bath or shower.

WALL / CEILING INSTALLATION

ALL / CEILING INSTALLATION

MAINTENANCE CAUTIONS

WARNING

BEFORE REPAIRING THE HEATER, MAKE SURE YOU HAVE TURNED OFF THE MAIN ELECTRICITY SUPPLY.

Caution:

When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or when

the location of the heater is changed, the heater should be turned to OFF and unplugged from the electrical

connection. Periodic inspection and removal of dirt and contaminants will ensure that equipment can be

operated safely.

1. Make sure the heater is always switched off before cleaning.

2. Check the Reflector and IR-Filament for dirt, dust or contaminants at least once a month. If

necessary, apply cleaning and maintenance process.

3. The number of checks may be increased considering the amount of the dust in the environment.

4. Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In

case of deformation, consult to your technical service.

5. Check the Power Cord and Plug visually while cleaning the appliance. In case of deformation,

consult to your technical service.

6. Never install the heater under extreme hot environments.

CLEANING, STORAGE AND DISPOSAL

Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free years. To

clean your heater, follow steps below:

1. Unplug the power cord or turn off the power for your safety before cleaning your appliance.

2. Make sure the heater is cool before continuing.

3. To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a mild

detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids

enter the heater).

4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the

heater. This may cause damage or deterioration to the surface of the heater.

5. DO NOT immerse the heater in water

6. Wait until the heater is completely dry before use.

ATTENTION:

1. Always disconnect the heater from the electricity supply and allow it to cool before attempting to work on

it.

2. If the heater has collected dust or dirt inside the unit or around the heating element, have the unit

cleaned by a qualified service agent. Do not operate the heater in this condition.

3. The only maintenance required is cleaning of the external surfaces of the heater.

4. Do not touch the heating element with bare fingers, as residue from your hand could affect the life of the

lamp. If it is accidentally touched, remove the finger marks with a soft cloth moistened with mentholated

spirit or alcohol.

5. Do not attempt to repair or adjust any electrical or mechanical functions on this heater.

6. The heater contains no user serviceable parts. Should the product suffer damage or breakdown, it must

be returned to the manufacturer or its service agent.

7. Damaged supply cords to be replaced by the manufacturer, service agent or similarly qualified person in

order to avoid hazard.

Storage:

Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. Use packaging carton to

store.

If you do not plan to use the heater for extended periods of time, it is recommended that it is cleaned and stored

(preferably in its original packaging) in a cool, dry place.

Do not dispose of electrical products with household waste. Please check with your local council

for advice on disposal or recycling. If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get into the food chain, damaging your

health and well-being.

PO BOX 1285, CRAWLEY, RH10 0LY, UK

496103A 0620

Table des matières

Autres manuels Ventair Chauffage

Ventair

Ventair MADRID MAD31HLX Manuel utilisateur

Ventair

Ventair Sahara Manuel utilisateur

Ventair

Ventair SUNB1000BL Manuel utilisateur

Ventair

Ventair Myka 4 Mode d’emploi

Ventair

Ventair Steampro STE31HLX Manuel utilisateur

Ventair

Ventair Myka 2 Mode d’emploi

Ventair

Ventair MANROSE MRHGXBL Manuel utilisateur

Ventair

Ventair MYKA 4 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur