We appreciate your purchase!
Please read the instruction manual before installation and keep it handy for future reference.
High purity light cast aluminum heatsink, high brightness, Nichia SMD chip, with a Mean Well driver. Design of the PCB LED for
medium and high height in industry: production, diaphanous warehouses with shelves at half height, workshops, gas stations,
shopping centers, markets, highway tolls and similar applications.
Problem Possible cause Solutions
LEDs stop working
The powerline is improperly
connected Connect the power cable
The power plug is loose Firming plug the power in
The LED driver malfunctions Replace with a new driver
The LED chip is damaged It can be repaired only by Venalsol.
LEDs flash on and off
The output of the driver is
abnormal Replace with a new driver
The LED chip breaks down It can be repaired only by Venalsol.
1
Venalsol guarantees its products, within the general conditions of supply, provided it is a manufacturing or material defect for a
period of five years from the date of purchase. The guarantee consists in the repair / replacement of the parts or assemblies that
are considered defective. Therefore, it will not apply to items that show damage as a result of not following the instructions for
use correctly, or when the installation has been carried out by non-specialized personnel. Likewise, the damages caused by
improper use of the device and faults produced during transport are excluded.
To make a warranty claim, you must notify your seller in writing, provide a purchase invoice and comply with the other warranty
requirements. It will always be necessary to return the damaged product with its original identification plate of Venalsol Smart
Light and its serial number. Transportation costs are excluded.
1. The decision as to whether the product is defective will be taken by Venalsol, who will check the malfunction of the
product. If Venalsol verifies that the product is defective, it will decide if it has to be repaired or replaced by a new
one. Venalsol reserves the right to use new or repaired products in the process of repair or replacement of the
product under warranty. The product that has been repaired or replaced will be guaranteed during the original
warranty period remaining. The cost of personnel and the cost of the machinery necessary for the replacement is
excluded. The total respons
ibility of Venalsol regarding the defective product will always be limited to the money paid
by the buyer for that product originally.
2. In case of request of a product in good condition, prior to the shipment of the defective product, in order to facilitate
the substitution work, Venalsol may accept to supply it and this will be billed. This invoice will be paid, if applicable,
once the allegedly damaged product is received and verified. If the warranty requirements are not met, or the
damaged material is not received, 60 days after the previous replacement, the invoice will be charged.
The guarantee will not cover the following circumstances:
1. Damages caused by force majeure such as wars, riots, sabotages, cyclones, earthquakes, floods, explosions, fires, etc.
2. Damages caused by improper use during the delivery period, defects caused by its misuse, wrong treatment or destruction of
the machinery.
3. Disassembly, modification or improper maintenance of repaired products without the authorization of the supplier.
4. Damage caused by the buyer or installer using low quality wiring or other components not compatible with the product.
5. This warranty is not valid if the product is used for different purposes for which it is originally designed.
Read the instructions carefully before you start using the product.
50W - 100W -150W - 200W - 240W
Venalsol Smart Light S.L.
C/ Garbí nº15. - Polígono Industrial Palma de Gandía -46724 - Palma de Gandía
Valencia (España) -Customer service: +34 962 808 219 info@venalsol.com
< PRODUCT DATA SHEET
www.venalsol.com
All rights reserved - Copyright © 2017
Dimmable 1-10Vcc
