Vemus Kilitronik MiniK 10p Manuel utilisateur
unique electronic cam lock
cabinets lockers boxes
Please read this
manual before using
the miniK 10p
INDEX
Introduction
Initial Setup
Assign Master Card
Selecting Operation Option Of The mini K10p
Assign or Delete Service Cards
Assign User Card / Cards
Deleting User Card
Operating Instructions
Individual Operation With Card To Lock / Unlock
One Time Use Operation With Card To Lock / Unlock
Cardless Individual Operation
- Change Password
- Unlock With Password
- Unlock With Cards
- Lock With Password
- Lock With Cards
Cardless One Time Use Operation
- Lock With Password
- Lock With Card
- Unlock With Password
- Unlock With Cards
Programming Instructions
Light And Audio Warnings
Program Table
Maintenance
General Warnings
Limited Warranty
Liability Limits
Technical Specifications
Thank You
Quick Info
3
4
4
4
5
5
5
6
6
6-7
7
7
7
7
8
8
8
8
8
9
9
10-11
11
12
13
13
14
14
14
14
15
INTRODUCTION
1. Red LED
2. Green LED
3. Keypad
4. Lock Body
5. Closing Position
6. Handle Indicator
7. Opening Position
8. Handle
9. Mounting Nut
10. Lock Body
11. Battery Cover
12. Battery Cover Screw
13. ID Label
14. Hand Knob Frame
15. Cam
16. Cam Screw
17. Cylinder Nut
Page 3
7
Back
Front
11
12
15
9
14
16
17
13
10
DESCRIPTION:
Besides the stylish and enriching design of the K10P cabinet lock, there are
various features that make the lock different from others, such as allowing to
use with wet hands, easy and quick installation at wood and steel cabinets, easy
application at existing cabinets, easy application at right/left cabinet doors, higher
battery life with very low energy consumption, high reliability and operating with
a contactless card.
USAGE:
Contactless card lock can be used with three types of cards: “User Card, Service
Card and Master Card”. Also, the lock can be used with a password by selecting
the user card free operation. Service card is passive by default. You should
center the card when holding over the handle to enable accurate reading. Since
the device enters the sleep mode to offer low energy consumption, you need to
wake the lock up by pressing any button before each operation.
INITIAL SETUP:
•
Assign Master card:
1- Press , two tone beep is heard.
2- And then present the master card to the handle until one tone beep is heard
and green led blinks.
•
Selecting Operation option of the mini K10p:
1- Press , present the master card to the handle and press , green
and red leds blink.
2- Press 1 for selecting operation options. And then
Press 0 for Individual operation with card.
Press 1 for One time use operation with card.
Press 2 for cardless Individual operation.
Press 3 for cardless One time use operation.
12
12
Page 4
This step is valid if there
is no assigned Master
Card before.
•
Assign/Delete Service card / cards: (If you don't need to use any service
card, skip this step)
1- Press , present the master card to the handle and press , green
and red leds blink.
2- Press 5 for selecting service card assign / delete option. And then
Press 0 for All service cards are deleted.
Press 1 for Assignment of 1. service card.
Press 2 for Assignment of 2. service card.
Press 3 for Assignment of 3. service card.
•
Assign User card / cards : (If you don't need to use any user card, skip this
step, when individual operation with card option is selected)
1- Press and then present master card to the handle, press again.
2- Then enter the sequence number of user card
3- Present that card to lock.
•
Deleting User card: (If you don't need to use any user card, skip this step,
when individual operation with card option is selected)
1- Press and then present master card to the handle, press .
2- Then enter the sequence number of user card.
13
2
Sequence
Number
12
Sequence
Number
Page 5
12
OPERATING INSTRUCTIONS
Individual operation with card (if selected)
To Unlock:
1- Press any number button for wake the lock up.
2- Present any assigned user card / master card / service card to the
handle in 3 seconds
3- turn the handle to the unlocked position.
To Lock:
1- Press any number button for wake the lock up.
2- Present any assigned user card / master card to the handle
in 3 seconds
3- Turn the handle to the locked position.
One time use operation with card (if selected)
To Lock:
1- Press any number button for wake the lock up.
2- Present any card / master card to the handle in 3 seconds
3- Turn the handle to the locked position.
31 2
Page 6
To Unlock:
1- Press any number button for wake the lock up.
2- Present any card / master card / service card to the handle in 3seconds
3- Turn the handle to the unlocked position.
Cardless individual operation (if selected)
Change Password: (default “1010”)
1- Press and then enter the old password by pressing number buttons,
press again.
2- And then enter the new password by pressing number button, press
To Unlock with Password: (default “1010”).
1- Enter the user password. 2- Turn the handle to the unlocked position.
To Unlock with Cards:
1- Press button for wake the lock up.
2- Present master card / service card to the handle in 3 seconds
3- Turn the handle to the unlocked position.
31 2
NEW PASWORD
OLD PASSWORD
1 2
32
2
1
USER PASSWORD
Page 7
To Lock with Password: (default “1010”).
1- Enter the user password. 2- Turn the handle to the locked position.
To Lock with Card:
1- Press button for wake the lock up.
2- Present master card to the handle in 3 seconds
3- Turn the handle to the locked position.
Cardless one time use operation (if selected)
To Lock with Password: (default “1010”)
1- Enter the new password. 2- Turn the handle to the locked position.
To Lock with Card:
1- Press button for wake the lock up.
2- Present master card to the handle in 3 seconds
3- Turn the handle to the locked position.
2 3
2
ONE TIME PASSWORD
1
2
1
USER PASSWORD
2 3
1
Page 8
To Unlock with Password:
1- Enter the same password with locking operation.
2- Turn the handle to the unlocked position.
To Unlock with Cards:
1- Press button for wake the lock up.
2- Present master card / service card to the handle in 3 seconds
3- Turn the handle to the unlocked position.
2
1
ONE TIME PASSWORD
31 2
Page 9
The unlocking direction depends on the type of door where miniK 10p
is used. All locking and unlocking illustrations depict right handed door
installation.
Page 10
PROGRAMMING INSTRUCTIONS
1- Press , present the master card and then press , green and red
leds blink.
2- Enter the program number to be customized and then enter the selected
settings number. (Press Program Number and then Selection Number)
Restore Default Settings: Press 0 - 1
Default Settings are :
One time use operation with card, audible operation, penalty operation is not
active, service card is not active, locking with password, door open warning is
not active, resetting user password with service card usage is not active, blocking
the lock is not active.
Mute Operation: Press 2 - 0
All audio warnings can be turned off if mute operation is selected (except
warning beeps).
Audible Operation: Press 2 - 1
Button feedback, warnings and confirmation are audible.
Penalty Operation: Press 3 - 1
Prevents tampering of lock by unauth orized people. Lock is blocked for 5
minutes if wrong password / card is entered three times consecutively.
Factory default is that this feature is not active. Press 3 - 0
Delete All User Cards: Press 4 - 0
It deletes all user cards assigned in the Individual operation with card option.
Reset User Password: Press 4 - 1
User password is restored to default “1010” in the Cardless individual operation
option.
12
Table des matières
Autres manuels Vemus Verrouillage
