Velleman NVR2 Manuel utilisateur

NVR2

6/12-CHANNEL HD NETWORK VIDEO RECORDER –HDMI –ONVIF –

EAGLE EYES –PUSH VIDEO

HD NETWERK VIDEORECORDER MET 6/12 KANALEN –HDMI –ONVIF

–EAGLE EYES –PUSH VIDEO

ENREGISTREUR VIDÉO RÉSEAU HD À 6/12 CANAUX - HDMI - ONVIF

- EAGLE EYES –PUSH VIDEO

GRABADOR DE VÍDEO EN RED DE ALTA DEFINICIÓN DE 6/12

CANALES - HDMI - ONVIF - EAGLE EYES –PUSH VIDEO

6/12-KANAL HOCHAUFLÖSENDER NETZWERK-VIDEOREKORDER -

HDMI - ONVIF - EAGLE EYES –PUSH VIDEO

QUICK INSTALLATION GUIDE 3

KORTE HANDLEIDING 13

GUIDE D'INSTALLATION RAPIDE 23

GUÍA RÁPIDA 33

SCHNELLEINSTIEG 43

NVR2

V. 01 –04/03/2013 2 ©Velleman nv

NVR2

V. 01 –04/03/2013 3 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device should be returned to your

distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening

electroshocks.

Always disconnect mains power when device not in use or when servicing or maintenance activities

are performed. Handle the power cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.

Never put objects filled with liquid on top of or close to the device.

Keep this device away from dust and extreme temperatures. Make sure the ventilation

openings are clear at all times. For sufficient air circulation, leave at least 1” (±2.5 cm) in

front of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to

the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

Keep this manual for future reference.

DO NOT use this product to violate privacy laws or perform other illegal activities.

4. Features

high definition recording

recording throughput: 12 channel mode: 720 x 480 pixels: ± 360 IPS

1280 x 720 pixels: ± 120 IPS

6 channel mode: 720 x 480 pixels: ± 180 IPS

1280 x 720 pixels: ± 180 IPS

1920 x 1080: ± 90 IPS

mobile surveillance via free EagleEyes software on iPhone, iPad, and Android

mobile phone connection via GPRS, 3G data or Wi-Fi

GUI (Graphical User Interface) display and USB mouse

high compatibility and offsite backup: compatible with all major IP cameras that are ONVIF certified

NVR2

V. 01 –04/03/2013 4 ©Velleman nv

added NAS function to back up all kind of IP cameras on the internet

works with free Central Management System (CMS) software for

offsite backup

local and remote control completely independent

HDMI video output resolution up to 1080P

optional monitor: MONSCA8

adapter: PAC916T

HDMI cable: Professional or Premium

optional hard disk: HD500GB/S, HD1TB/S, HD2TB/S

USB mouse: included

IR remote control: included

IP cameras: suitable: CAMIP11, CAMIP12

also compatible with: CAMIP9, CAMIP13, CAMIP14 & ONVIF cameras

compatible with powerline adapter: EM8017, EM8024, EM8025, EM8026

optional router: EM4542, EM4553, EM4570, PCRT1

5. Overview

Refer to the illustrations on page 2of this manual.

Front panel

POWER

LED indicator: the NVR is switched on

ALARM

LED indicator: an alarm event occurs

WAN

LED indicator: the NVR is connected to internet

LAN

LED indicator: the NVR is connected to the LAN

SATA

LED indicator: SATA hard disk is active

HDD1/HDD2

LED indicator: up to two hard disks are installed in the NVR and connected well

USB port

Insert a compatible USB flash drive for video backup.

Note: For the list of compatible USB flash drives, refer to the full manual on the

CD-ROM.

mouse port

Insert a mouse (included).

Back panel

RS485

RS 485 port

SATA

Connect an external SATA hard disk

HDMI video output

port

Connect to a monitor that supports high-definition video output (HDMI port).

Note: Use an appropriate adapter (not incl.) to connect a monitor with VGA or

composite connectors.

LAN

Connect to local IP cameras via an 8P8C (RJ45) network cable.

WAN

Connect to internet via an 8P8C (RJ45) network cable

AUDIO OUT

Connect to an amplifier audio line-in.

DC 19V IN

Connect to the power supply adapter (incl.).

6. Installing the hard disk drive

1. Obtain a suitable hard disk (not included), type ESATA (Serial Advanced Technology Attachment). The hard

disk must be formatted.

2. Make sure to unplug the device from the mains before servicing and do not touch any electronic circuitry

to avoid electrostatic discharge.

3. Loosen the screws and remove the top cover.

4. Find the hard disk bracket in the NVR, and insert the hard disk in the bracket.

5. With the PCB side facing up, connect the hard disk to the power connector and the data connector.

6. Fasten the hard disk with the supplied screws, two for each side.

NVR2

V. 01 –04/03/2013 5 ©Velleman nv

7. To install a second hard disk, find the supplied hard disk brackets in the package, and fix them to the NVR

base.

8. With the PCB side facing up, connect the hard disk to the power connector and data connector.

9. Place the hard disk in the brackets and fasten it with the supplied screws, two for each side.

10. Put the top cover back in place and fasten the screws.

7. Connection Diagram

Note: To ensure that automatic configuration works well, connect and switch on the IP cameras first. Only then

switch on the NVR.

You can up to 12 IP cameras.

Refer to the illustrations on page 2of this manual.

IP camera

monitor supporting high-definition video

Modem

19VDC power supply adapter

Router

NVR back panel

8P8C (RJ45) network cable

hub/switch

Connecting the IP camera (plug and play)

1. Connect the camera to a hub/switch.

2. Wait until the camera is configured automatically and the images appear on the monitor.

8. Information and Panels on the Monitor

Refer to the illustrations on page 2of this manual.

NVR status

key lock

key unlock

channel lock

channel unlock

USB flash drive / device connected

no USB device connected

timer recording on

timer recording off

overwrite on

overwrite off

sequence mode on

sequence mode off

PTZ mode on

PTZ mode off

CPU load

NVR2

V. 01 –04/03/2013 6 ©Velleman nv

network status

(WAN) internet connected

(WAN) internet disconnected

(WAN) local connection

(LAN) auto mode –Mbit/s

(LAN) auto mode –Gbit/s

(LAN) DHCP / static IP mode

(LAN) camera disconnected

available hard disk space

channel status

auto search on

auto search off

live audio on

audio off

audio playback on

audio playback off

original size

fit to screen

recording

human detection event

alarm event

motion event

live information

playback information

quick operation

Click to show the power-off panel to stop or reboot the system.

Click to show the channel switch panel and select the channel you want.

Switch to the channel you want first, then click to enter zoom mode. Click and drag the

red frame on the bottom left of the screen to move to the area where you want to zoom in.

Click to enter PTZ mode and show the PTZ camera control panel.

Click to open the IP search window and check the connection status of each channel.

main menu

QUICK START

Click to set the status display, image settings, and date & time.

SYSTEM

Click to set the system configuration.

EVENT

INFORMATION

Click to enter the event search menu.

ADVANCED CONFIG

Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK,

DISPLAY, RECORD and NOTIFY.

SCHEDULE SETTING

Click to set the recording timer.

playback panel

fast forward

Click to fast forward at 4 to 32 times normal speed.

fast rewind

Click to fast rewind at 4 to 32 times normal speed.

play/pause

Click to play the latest recorded video clip. Click again to pause.

In pause mode, click once to go one frame forward, or to go

one frame backward.

stop

Click to stop the video playback.

NVR2

V. 01 –04/03/2013 7 ©Velleman nv

slow playback

Click once to play at 1/4 normal speed, click twice for 1/8 normal

speed.

previous/next hour

Click to jump to the next/previous one-hour time interval (for

example, 11:00 ~ 12:00 or 14:00 ~ 15:00) and start playing the

earliest video clip recorded during this hour.

quick search

Click to enter the quick search menu.

8.2 Key lock / unlock

To lock or unlock NVR local operation, click (lock) or (unlock) on the NVR status panel [15]. When

you unlock NVR local operation, the system asks you to enter a user name and password.

Note: The default user name and password are “admin”. Different user types have different access rights to

NVR functions. For details, refer to the full manual on the CD-ROM.

9. Configuration of camera on LAN Port plug and play

Note: This configuration method applies to ETS cameras.

9.1 Automatic Configuration

The NVR will automatically configure the IP address of an ETS camera connected by LAN if:

The default IP configuration method of the camera is DHCP.

The camera is powered on before the NVR is powered on.

If not, you can configure the IP address of your camera manually as described further below.

9.2 Manual Configuration

If the NVR does not configure the IP address of your camera automatically as described above, the default IP

configuration method of your IP camera may not be set to DHCP. To solve this, reconfigure the camera’s IP

address to 10.1.1.xx (xx ranges from 11 ~ 253), in the same network segment as the NVR.

1. In the quick operation panel [18], click . You’ll see the list of every connected IP camera with its

connection status and MAC address.

2. Select an IP address that is not used (UNUSED), and click SETUP.

NVR2

V. 01 –04/03/2013 8 ©Velleman nv

1. Select STATIC in NETWORK TYPE, and change the IP address to 10.1.1.xx (xx ranges from 11 ~ 253).

2. Click APPLY and EXIT to save your changes.

3. Wait until the NVR detects the IP camera and displays images.

9.3 Configuring a remote internet camera

Via internet you can record video images from an IP camera in a remote location.

1. Make sure that the IP camera is accessible outside its LAN network via a dynamic domain name (for

example ip_office.ddns.eagleeyes.tw).

2. In the main menu [19], click (ADVANCED CONFIG) and select CONNECTION.

3. To assign a channel to a remote IP camera, click URI to enter the address of the camera and its port

number.

4. Click SETUP to enter the access information of the camera.

5. Enter the user name (USER NAME) and password (PASSWORD) to access the IP camera.

6. Click GET TYPE to detect the camera and make sure the access information is correct.

7. Select the image size (IMAGE SIZE), image quality (QUALITY), and images per second (I.P.S.).

Note: The available options depend on the camera you want to connect.

8. Click GET TYPE to detect the camera and make sure the access information is correct.

9. Optional: for a camera with audio recording, set AUDIO to ON or OFF.

10. Quick Operation

10.1 Switching on/off and Rebooting

To power off or reboot the NVR:

In the quick operation panel [18], click and then click (power off) or (reboot).

NVR2

V. 01 –04/03/2013 9 ©Velleman nv

10.2 Viewing a Channel in Full-Screen Mode

To view a channel in full screen mode, you can:

Click directly on the channel image to see that channel in full screen mode. Double-click the image to

restore the previous overview.

In the quick operation panel [18], click . On the control panel that appears, select the channel you

want to display in full screen mode. Click to restore the previous overview.

10.3 Playing Recorded Video Clips

1. Make sure that manual and/or event recording is enabled: in the main menu [19], click (ADVANCED

CONFIG) and select RECORD to check or adjust the settings.

2. In the playback panel [20], press the play button . The recorded files are shown.

3. The fast forward and fast rewind buttons increase/decrease the playback speed. Press the button

repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).

4. Press the pause button to pause playback.

5. Press the stop button to stop playback and return to live monitoring.

11. Push Video configuration

11.1 Configuring the WAN port

1. Make sure the NVR is properly connected to the router with a RJ45 network cable.

2. From your NVR, select (ADVANCED CONFIG), and select “Network” “WAN”.

NVR2

V. 01 –04/03/2013 10 ©Velleman nv

3. Select “DHCP”, and configure the DNS setting and port number.

The default port number is 80. Typically, the TCP port used by HTTP is 80. However in some cases,

it is better to change this port number for added flexibility or security.

4. Then, note down the IP address shown in “IP”. This is the IP address assigned to your NVR by the router.

You’ll need it later for port forwarding.

5. Go to “DDNS”, and select “eagleeyes” in “SYSTEM NAME”.

6. Note down the whole address under “CURRENT HOST ADDRESS”, such as

[email protected]. This will be the address used to access your NVR remotely.

7. Select “EXIT” to return to the live view, and continue to the next step for port forwarding.

8. From the web browser of your PC, enter the IP address of your router to access your router.

9. Enter the user name and password if needed.

10. In the router setting interface, go to the port forwarding (or virtual server) rule configuration page.

The naming of port forwarding or virtual server may vary based on different router brands. To know where

it is, refer to the user manual of your router.

11. Enter the NVR IP address and the port number you just noted down and enable this rule.

11.2 Configuring a push video trigger

Go to Advanced Config > Notify > tab Push Video

You can have the NVR send a push video to your mobile device for every channel.

For every channel, you can, depending on the type of alarm sensor:

Send a push video for a normal open contact (NO)

Send a push video for a normal closed contact (NC)

Select OFF to turn off push video for a channel.

Table des matières

Langues :

Autres manuels Velleman DVR

Velleman

Velleman DVR-4LCD Manuel utilisateur

Velleman

Velleman VCC6 Manuel utilisateur

Velleman

Velleman DVR4QAF Manuel utilisateur

Velleman

Velleman DVR4T3 Manuel utilisateur

Velleman

Velleman DVR4USBH Manuel utilisateur

Velleman

Velleman DVR8H1 Manuel utilisateur

Velleman

Velleman DVR1A Manuel utilisateur

Velleman

Velleman NVR5 Manuel utilisateur

Velleman

Velleman DVR4USB Manuel utilisateur

Velleman

Velleman DVR8T4 Manuel utilisateur

Velleman

Velleman DVR16H3 Manuel utilisateur

Velleman

Velleman DVR16H1 Manuel utilisateur

Velleman

Velleman DVR16T2 Manuel utilisateur

Velleman

Velleman DVR4H2 Manuel utilisateur

Velleman

Velleman DVR8H3 Manuel utilisateur

Velleman

Velleman DVR8H2 Manuel utilisateur

Velleman

Velleman DVR4MQAEE Manuel utilisateur

Velleman

Velleman DVR4H4 Manuel utilisateur

Velleman

Velleman DVR-4LCD Manuel utilisateur

Velleman

Velleman DVR4L5 Manuel utilisateur

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur