Vecow MTD-6019 Manuel utilisateur
USER
Manual
USER
Manual
1.0.0 Edition 20200302
Multi-Touch 16:9 Full HD Projected Capacitive Industrial Display
15"/17"/19"/21.5"/24", Front Panel IP65 Waterproof
MTD-6000
ii
©Vecow MTD-6000 User Manual
Version Date Page Description Remark
1.00 2020/03/02 All Ocial Release
Record of Revision
iii
©Vecow MTD-6000 User Manual
This manual is released by Vecow Co., Ltd. for reference purpose only. All
product oerings and specications are subject to change without prior notice.
Vecow Co., Ltd. is under no legal commitment to the details of this document.
Vecow shall not be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use of this document, the products, or any third party
infringements, which may result from such use.
Disclaimer
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if it is not installed and used
in accordance with the instruction manual, it may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC
The products described in this manual comply with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to
remain CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
CE
Declaration of Conformity
This document contains proprietary information protected by copyright. No part
of this publication may be reproduced in any form or by any means, electric,
photocopying, recording or otherwise, without prior written authorization
by Vecow Co., Ltd. The rights of all the brand names, product names, and
trademarks belong to their respective owners.
Copyright and Trademarks
iv
©Vecow MTD-6000 User Manual
Part Number Description
MTD-6015 15” Multi-Touch 4:3 HD Projected Capacitive Industrial Display,
Front Panel IP65 Waterproof
MTD-6017 17” Multi-Touch 4:3 HD Projected Capacitive Industrial Display,
Front Panel IP65 Waterproof
MTD-6019 19” Multi-Touch 4:3 HD Projected Capacitive Industrial Display,
Front Panel IP65 Waterproof
MTD-6021 21” Multi-Touch 16:9 Full HD Projected Capacitive Industrial Display,
Front Panel IP65 Waterproof
MTD-6024 24” Multi-Touch 16:9 Full HD Projected Capacitive Industrial Display,
Front Panel IP65 Waterproof
Order Information
Part Number Description
PWA-60WP3 60W, 12V, 90V AC to 264V AC Power Adaptor for 3-pin 5.0mm
Terminal Block
VESA Stand VESA Table Stand
Optional Accessories
v
©Vecow MTD-6000 User Manual
Table of Contents
CHAPTER 1 GENERAL INTRODUCTION 1
1.1 Overview 1
1.2 Features 1
1.3 Product Specication 2
1.3.1 Specications of MTD-6015 2
1.3.2 Specications of MTD-6017 3
1.3.3 Specications of MTD-6019 4
1.3.4 Specications of MTD-6021 5
1.3.5 Specications of MTD-6024 6
1.4 Mechanical Dimension 7
1.4.1 Dimensions of MTD-6015 7
1.4.2 Dimensions of MTD-6017 8
1.4.3 Dimensions of MTD-6019 9
1.4.4 Dimensions of MTD-6021 10
1.4.5 Dimensions of MTD-6024 11
CHAPTER 2 GETTING TO KNOW YOUR MTD-6000 12
2.1 Packing List 12
2.2 I/O & Functions 13
2.3 MTD-6000 OSD function 14
1
©Vecow MTD-6000 User Manual GENERAL INTRODUCTION
GENERAL INTRODUCTION
1.1 Overview
Vecow’s MTD-6000 series multi-touch display with wide range of industrial grade
LCD sizes including 15", 17",19", 21.5" and 24" are designed for industrial and
IoT applications with IP65 front bezel design and wide operation temperature
design.
Designed with projected capacitive touch with 10 points multi-touch functionality
with zoom-in/zoom-out/rotation and enables users easier to nd the data they
need compared to traditional touchscreens. To facilitate intuitive gestures
and increase efficiency, there is no need for another converter but through a
USB cable to connect embedded PC or motherboard to MTD-6000 Series.
Furthermore, MTD-6000 Series is 7H anti-scratch surface design for harsh and
hazardous environments.
MTD-6000 series provide multiple I/O input ports with 1 VGA and 1 DVI inputs,
and 3-pin terminal black connector for 12V DC power input. With internal
speakers, VESA mount and Penal mount, Vecow MTD-6000 Series are ideal
display for industrial deployment and solutions in smart manufacturing for
HMI and AOI scenarios, gaming, intelligent surveillance, infotainment system,
medical and AIoT /Industry 4.0 applications.
1
1.2 Features
• 15” to 24” Multi-touch LCD Display
• 10-point Projected Capacitive Multi-Touch Screen
• 7H Hardness Anti-Scratch Surface
• Supports VGA, DVI-D Interface
• Landscape Mode and Portrait Mode supported
• Mounting : VESA Mount, Panel Mount
• IP65 Front Panel Design compliance
• Build-in speakers
2
©Vecow MTD-6000 User Manual GENERAL INTRODUCTION
1.3 Product Specication
1.3.1 Specications of MTD-6015
Panel
Type TFT-LCD
Viewable Size 15” (4:3)
Resolution 1024 x 768
Display Color 16.7M (RGB 8-bit)
Backlight LED
Brightness 250
Contrast Ratio 600:1
Touch
Type 10 points projected capacitive touch
Transparency ≥85%
Surface Hardness 7H surface hardness
Control Interface USB interface
I/O Interface
VGA DB15 Type VGA Port
DVI-I DVI-D: Up to 1920 x 1080 @60Hz
Touchscreen Connector Type A USB to enable touch screen function
OSD 5 Key On Screen Display for function management, support
multi language
Power
Power Input Single 12V DC power input
Power Interface 3-pin terminal block : V+, V-, frame Ground
Mechanical
Dimension 360.9 x 277.8 x 54 mm (14.21" x 10.94" x 2.13")
Weight 3.5kg (7.72 lb)
Mounting • Panel mount by mounting Kit
• VESA mount (75 x 75mm, 100 x 100mm)
Environment
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Humidity 5% to 90% Humidity, non-condensing
Relative Humidity 95% at 65°C
Shock • IEC 60068-2-27
• 20G, Half-sine, 11ms
Vibration
• IEC 60068-2-64
• Non-operation: 10Hz to 200 Hz 1.5Grms, X, Y, Z,30 mins
each Axis
EMC CE, FCC
Others Build-in speakers
3
©Vecow MTD-6000 User Manual GENERAL INTRODUCTION
1.3.2 Specications of MTD-6017
Panel
Type TFT-LCD
Viewable Size 17” (4:3)
Resolution 1280 x 1024
Display Color 16.7M (RGB 8-bit)
Backlight LED
Brightness 250
Contrast Ratio 1000:1
Touch
Type 10 points projected capacitive touch
Transparency ≥85%
Surface Hardness 7H surface hardness
Control Interface USB interface
I/O Interface
VGA DB15 Type VGA Port
DVI-I DVI-D: Up to 1920 x 1080 @60Hz
Touchscreen Connector Type A USB to enable touch screen function
OSD 5 Key On Screen Display for function management, support
multi language
Power
Power Input Single 12V DC power input
Power Interface 3-pin terminal block : V+, V-, frame Ground
Mechanical
Dimension 360.9 x 277.8 x 54 mm (14.21" x 10.94" x 2.13")
Weight 3.5kg (7.72 lb)
Mounting • Panel mount by mounting Kit
• VESA mount (75 x 75mm, 100 x 100mm)
Environment
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Humidity 5% to 90% Humidity, non-condensing
Relative Humidity 95% at 65°C
Shock • IEC 60068-2-27
• 20G, Half-sine, 11ms
Vibration
• IEC 60068-2-64
• Non-operation: 10Hz to 200 Hz 1.5Grms, X, Y, Z,30 mins
each Axis
EMC CE, FCC
Others Build-in speakers
4
©Vecow MTD-6000 User Manual GENERAL INTRODUCTION
1.3.3 Specications of MTD-6019
Panel
Type TFT-LCD
Viewable Size 19” (4:3)
Resolution 1280 x 1024
Display Color 16.7M (RGB 8-bit)
Backlight LED
Brightness 250
Contrast Ratio 3000:1
Touch
Type 10 points projected capacitive touch
Transparency ≥85%
Surface Hardness 7H surface hardness
Control Interface USB interface
I/O Interface
VGA DB15 Type VGA Port
DVI-I DVI-D: Up to 1920 x 1080 @60Hz
Touchscreen Connector Type A USB to enable touch screen function
OSD 5 Key On Screen Display for function management, support
multi language
Power
Power Input Single 12V DC power input
Power Interface 3-pin terminal block : V+, V-, frame Ground
Mechanical
Dimension 360.9 x 277.8 x 54 mm (14.21" x 10.94" x 2.13")
Weight 3.5kg (7.72 lb)
Mounting • Panel mount by mounting Kit
• VESA mount (75 x 75mm, 100 x 100mm)
Environment
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Humidity 5% to 90% Humidity, non-condensing
Relative Humidity 95% at 65°C
Shock • IEC 60068-2-27
• 20G, Half-sine, 11ms
Vibration
• IEC 60068-2-64
• Non-operation: 10Hz to 200 Hz 1.5Grms, X, Y, Z,30 mins
each Axis
EMC CE, FCC
Others Build-in speakers
5
©Vecow MTD-6000 User Manual GENERAL INTRODUCTION
1.3.4 Specications of MTD-6021
Panel
Type TFT-LCD
Viewable Size 21” (16:9)
Resolution 1920 x 1080(Full HD)
Display Color 16.7M (RGB 8-bit)
Backlight LED
Brightness 250
Contrast Ratio 1000:1
Touch
Type 10 points projected capacitive touch
Transparency ≥85%
Surface Hardness 7H surface hardness
Control Interface USB interface
I/O Interface
VGA DB15 Type VGA Port
DVI-I DVI-D: Up to 1920 x 1080 @60Hz
Touchscreen Connector Type A USB to enable touch screen function
OSD 5 Key On Screen Display for function management, support
multi language
Power
Power Input Single 12V DC power input
Power Interface 3-pin terminal block : V+, V-, frame Ground
Mechanical
Dimension 360.9 x 277.8 x 54 mm (14.21" x 10.94" x 2.13")
Weight 3.5kg (7.72 lb)
Mounting • Panel mount by mounting Kit
• VESA mount (75 x 75mm, 100 x 100mm)
Environment
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Humidity 5% to 90% Humidity, non-condensing
Relative Humidity 95% at 65°C
Shock • IEC 60068-2-27
• 20G, Half-sine, 11ms
Vibration
• IEC 60068-2-64
• Non-operation: 10Hz to 200 Hz 1.5Grms, X, Y, Z,30 mins
each Axis
EMC CE, FCC
Others Build-in speakers
Ce manuel convient aux modèles suivants
5
Table des matières
