
Once the first 2 posts are assembled, place them where you want to assemble the first wall section. It’s
important to start building the walls at the highest floor point. There are upper and lower stretchers that
insert into posts. Make sure to insert and secure all upper and lower stretchers before placing in any panels.
For stability, have one person hold the post while another installs the stretchers. Install the lower
stretcher by inserting one side into one post and then the other side into the next post. Push down
until it clicks to lock.
LOWER STRETCHER
Similar to the lower stretcher, insert the upper stretcher into the anchor points at the top of each post.
Once in place, pull down until it clicks. Push up on draw latches to secure. Tighten the thread if needed.
3
4
3.
UPPER STRETCHER