Vaporfi PULSE Manuel utilisateur

Table des matières

Autres manuels Vaporfi Vaporisateur

Vaporfi

Vaporfi AIR 2 Manuel utilisateur

Vaporfi

Vaporfi VOLT Manuel utilisateur

Vaporfi

Vaporfi Rebel Manuel utilisateur

Vaporfi

Vaporfi V-GRIP 220 Manuel utilisateur

Vaporfi

Vaporfi VEX 75 TC Manuel utilisateur

Vaporfi

Vaporfi VOX 60 TC Manuel utilisateur

Vaporfi

Vaporfi VAIO 75 TC Manuel utilisateur

Vaporfi

Vaporfi ATOM Instructions d'utilisation et d'entretien

Vaporfi

Vaporfi VAIO 75 TC Manuel utilisateur

Vaporfi

Vaporfi VOLT 2 Manuel utilisateur

Vaporfi

Vaporfi V-GRIP Manuel utilisateur

Vaporfi

Vaporfi VEX 150 TC Manuel utilisateur

Vaporfi

Vaporfi VOX 80 TC Manuel utilisateur

Vaporfi

Vaporfi PRO II Manuel utilisateur

Vaporfi

Vaporfi VAIO 80 TV Manuel utilisateur

Manuels Vaporisateur populaires d'autres marques

Vivant

Vivant Dabox Pro Manuel utilisateur

Pulsar

Pulsar Triad Manuel utilisateur

Smok

Smok MAG Manuel utilisateur

Puzhen

Puzhen Bamboo Manuel utilisateur

XVAPE

XVAPE FOG PRO Manuel utilisateur

DaVinci

DaVinci MIQRO Manuel utilisateur

iQOS

iQOS lil SOLID 2.0 Manuel utilisateur

CHART

CHART VaporMan 125 Manuel utilisateur

InnoCigs

InnoCigs EGRIP 2 LIGHT Manuel utilisateur

OOZE

OOZE Movez Manuel utilisateur

STORZ & BICKEL

STORZ & BICKEL Volcano Hybrid Manuel d'instructions

STEAMAX

STEAMAX STICK X8 Manuel utilisateur

Storz & Bickel GMBH

Storz & Bickel GMBH Crafty Manuel utilisateur

Joyfect

Joyfect Freaky One Manuel utilisateur

SIGELEI

SIGELEI 213 FOG Manuel utilisateur

Eleaf

Eleaf Lemo 2 Manuel utilisateur

Vapor Brothers

Vapor Brothers VB Eleven Pen Manuel utilisateur

STORZ & BICKEL

STORZ & BICKEL VOLCANO CLASSIC Manuel utilisateur

USER MANUAL

01

VAPORFI PULSE USER MANUAL

Thank you for purchasing the VaporFi Pulse Electronic Cigarette.

In order to use your electronic cigarette correctly, efficiently and

safely, please follow the instructions in this manual.

THE VAPORFI PULSE STARTER KIT INCLUDES:

» 2 Rechargeable Advanced Batteries (750 mAh)

» 2 Premium Tanks

» 1 Wall Charging Adaptor

» 1 Cordless Charger with USB

» 1 User Manual

03

GETTING STARTED

1. Unscrew the mouthpiece in order to fill the tank with e-liquid (see page 4).

2. Point and pour e-liquid into the sides of the tank. Fill to about 75% capacity of the tank.

(DO NOT OVER-FILL OR POUR E-LIQUID INSIDE OF THE CENTER TUBE)

3. Screw the mouthpiece back onto the tank.

4. Screw the tank onto the battery.

5. Do not over tighten parts, but ensure that all parts are securely assembled.

6. Quickly press down and release on the battery’s power button 5 times within 2 seconds

to turn on your battery.

7. To use, press down and hold the power button while you take a puff. Release the button

when you have finished puffing and enjoy!

REFILLING E-LIQUID

When you have about 25% of e-liquid remaining or you experience

a slightly burnt taste, you will need to refill your tank with e-liquid

1. Always remove the battery from the tank before refilling with

e-liquid. When unscrewing your tank from your battery, always

turn your device sideways, hold the steel cap located on the tank

and unscrew the battery counterclockwise.

2. Unscrew and remove the mouthpiece in order to fill the tank.

3. While holding your tank, lightly press down on the atomizer head

with your thumb, point and pour e-liquid into the sides of the

tank. Fill to about 75% capacity of the tank. (DO NOT OVER-FILL

OR POUR E-LIQUID INSIDE OF THE CENTER TUBE)

4. Screw the mouthpiece back onto the tank.

05

CHANGING YOUR ATOMIZER HEAD

Once you experience a burnt taste, a decrease in flavor or vapor production, it may be

time to replace your atomizer head. It is recommended to change your atomizer head once

every 1-4 weeks (depending on use).

To get the truest flavor from your e-liquid, we also suggest changing your atomizer head

when switching e-liquid flavors.

1. Before replacing your atomizer head, make sure your tank does not contain any e-liquid.

2. To replace your atomizer head, unscrew and remove the mouthpiece of the tank by

gripping the mouthpiece and turning it counterclockwise.

3. Grab the rubber seal located at the top of the atomizer and pull and remove the atomizer

head.

4. Once the old atomizer has been removed, push and connect the new atomizer head.

5. Screw the mouthpiece back onto your tank by turning it clockwise. Make sure not to over

tighten.

07

BATTERY OPERATION

TURNING BATTERY ON/OFF

» To turn the battery on, quickly press and release the power button 5 times within 2

seconds. The power button will flash 3 times to indicate that the device is ready for use.

» To turn the battery off, quickly press and release the power button 5 times within 2

seconds. The power button will flash 5 times to indicate that the device has turned off.

POWER SAVING SAFETY FEATURE

» If the battery’s power button is continuously pressed and held for 10 seconds, the

battery will flash 3 times and go into standby mode (hibernating). To continue use of the

device after the battery hibernates, simply press the battery’s power button and use as

normal.

CHARGING BATTERY

1. The LED display indicates how much battery capacity is available and when the battery

will need to be recharged.

2. Connect the circular charger to the USB charging cable.

3. Then connect the USB charging cable to either the USB port

located on the wall charging adapter or to a fully powered USB

port, such as on a computer.

4. Insert (do not screw) the battery’s end in the center hole of the

circular charger.

5. Once the battery is properly connected to the circular charger, the

LED lights on the battery will flash 3 times to confirm charging has

begun. The LED lights will remain off through the completion of the charge.

6. Allow 2.5 hours for your battery to complete charging.