Valore LA36 Manuel utilisateur
Thank you for purchasing the Valore Automatic Soap Dispenser ( LA36 ).
Important: Please read the user manual thoroughly before using the product.
Features:
• Digital temperature display for accurate monitoring
• Adjustable control for precise soap dispensing
• Touch-less operation for quick foaming
• Conveniently concealed water tank
Specifications: Package Contents:
Valore
Automatic Soap Dispenser
• Inductive distance: 0-70mm
• Tank capacity: 320ml
• Battery capacity: 1500mAh
• Charging time: Approximately 2 hours
• Standby time: Up to 3 mouths
• Input: DC5V/1A
• Material: ABS+PP
• Dimensions (L × W × H): 77 x 140 x 160mm
• Weight: 324g
• Automatic Soap Dispense x 1
• USB-C Charging Cable x 1
• Dredge Bottle x 1
• Wall Bracket x 1
• Wall Mounted Panel x 2
• Funnel x 1
PRODUCT INTRODUCTION
SELLING POINTS
Switch button
Display
Water inlet
Foaming port
Body
Water box
Charging port
Wall-mounted
Rechargeable Water proof Hidden water tank
Fast foaming Digital display Dense foam
NOTES
STORAGE AND TRANSPORTATION
• Please do not immerse the product into water or wash it directly to avoid damage.
• Please do not add gel or any other non-foaming type hand sanitizer to replenish
it to avoid clogging the machine.
• Please do not disassemble the product without authoriz ation to avoid product
failure.
• Hand sanitizer should not be eaten. If it gets into your eyes, please wash it with
plenty of water.
• When the liquid level of hand sanitizer is low, please replenish hand sanitizer in
time for convenience.
• The temperature showed on display is the indoor temperature, not the outdoor
temperature.
• Please charge the product while the battery is low.
• Keep the product in a cool and dry place, avoid direct sunlight or close to heat
source.
• If it is not used for a long time, please turn off the power and empty the water
box.
ON/OFF INSTRUCTION
Long press to power on the product
Display shows the temperature and the battery
capacity.
The display will automatically oafter 6 seconds.
Long press to power othe product
The screen shows the battery indication.
The display will automatically oafter 6 seconds.
Charging
Connect the device with Type C cable.
Shifting Mode Setting:
Quickly double-click the button to enter into shifting mode,add 1 level of every time
to single press within 3s (cycling 123), there are multiple modes can be choose (the
screen display corresponding mode). No operation within 3s is automatically exited
(battery power level display).
Touch once to switch between Centigrade and Fahrenheit.
When the product is on, click the button to show temperature and battery
capacity.The display will be automatically off after 6 seconds.
Temperature
Battery indication Centigrade
Fahrenheit
Battery capacity
3 grid lights is keeping on, 60%- full capacity
Last 2 grid lights is keeping on, 30-60%
Last 1 grid light is keeping on, 10-30%
Last 1 grid light is blinking, 0-10%
INSTALLMENT INSTRUCTIONS
When charging, only the power indicator works, and the temperature is not
displayed.
When charging, use the induction foaming or touch the button, the screen will
switch to show temperature display and battery capacity; only the power indicator
will work after 6 seconds.
Charging indicator
3 grid lights is keeping on, full capacity
1st grid light is blinking, 2 other lights is keeping on, 60-90%
2nd grid light is blinking, last light is keeping on, 30-60%
3rd grid light is blinking, 0-30%
1. Attach the bracket to the wall first.
2. Install the foam machine to bracket.
3. Open the silicone cover of the water tank.
4. Insert the funnel or pour the foam-type hand sanitizer directly into water tank.
5. Close the water tank.
6. Gently press the button for 3-5S to turn on the automatic foam machine, and
stretch out your hand to the sensing area to get rich foam.
Wall mounted soap dispenser backplane installation instructions:
1. Find smooth tile, glass or stainless steel wall, wipe it with a damp towel first,
then dry it with toilet paper.
2. After the wall is completely dry, firmly adhere the adhesive backplane to the wall
and press it firmly with your hand for 3-5 minutes.
3. After the backplane is adhered for 12 hours, you can install the dispenser (While
waiting for the backplane, do not lay the dispenser full filled with hand sanitizer flat
to avoid dumping or leakage)
TECHNICAL SUPPORT & WARRANTY
• For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product.
• Do not store the product in a high temperature environment.
• Do not place the product near fire or other excessively hot environments.
• Do not expose the product to moisture or submerge it in liquid. Keep the product dry at all
times.
• Do not disassemble the product or attempt to repair or modify it in any manner.
• Do not expose the product to strong impacts or use on rough surfaces. If there is any
serious damage to the product such as dents, cracks or abrasion, stop using the product and
you have purchased it from.
• If the product produces any abnormal smell, heats up abnormally during use or experiences
unusual changes in form or colour, stop using the product and contact us immediately via
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are
copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any
material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and
communications statutes.
The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered
trademarks and service marks of Valore and others. All other registered and unregistered company names,
product names and marks mentioned herein the (“Materials”) are the property of their respective owners and
may be trademarks or registered trademarks.
Inspired by Valore Singapore
For full range of Valore products visit www.valore.sg
Table des matières
Autres manuels Valore Distributeur
