Valley Electronics Daysy Manuel utilisateur

Instructions for Use English from page 03

Gebrauchsanweisung Deutsch ab Seite 31

Mode d’emploi Français à partir de la page 59

Istruzioni per l’uso Italiano da pagina 87

Instrucciones de Uso Español desde la página 115

english

Love your body:

Welcome to Daysy

4Table ofContents

Page 6 to 8 | Precautions

What you need to know.

Page 9 to 21 | Operation

How to use Daysy.

Page 22 to 30 | Technical notes and warranty

What else you need to know.

english

About Daysy

Daysy calculates a woman’s daily menstrual cycle status by interpreting her basal

body temperature. Daysy displays your menstrual cycle status using colored

lights. Daysy is to be used to facilitate conception. Daysy is not a replacement for

contraception, nor is it a medical thermometer.

Included in delivery:

– Daysy

– Sensor cap

– Micro USB cable

– Instructions for Use

– Quick Guide

6Precautions

– Before using your Daysy for the ﬁrst time, please read these instructions

carefully and keep them in a safe place for later reference.

– Before you start using your Daysy, you need to entirely discontinue hormonal

methods of birth control.

– Daysy can better determine your cycle if you have regular cycles.

– Daysy is not suitable for use if you are undergoing hormonal treatment, or if

you are using hormonal methods of birth control.

– Daysy does not protect you from sexually transmitted diseases.

– You should always read your daily fertility status from Daysy itself, not the app.

– Before using Daysy for the ﬁrst time, charge the battery fully.

– Never open the housing.

– Never chew on the sensor.

– Make sure that the device or its individual parts are not swallowed.

– WARNING: The device must not be modiﬁed.

– WARNING: Avoid using Daysy at or less than 30 cm away from other electrical

equipment, as this could result in improper operation.

english

– WARNING: Use of cables or equipment other than those speciﬁed in this docu-

ment may cause electrical interference or lead to failure of Daysy.

– Do not expose your Daysy to high temperatures (e.g. boiling water).

– Do not expose your Daysy to direct sunlight for long periods of time.

– Do not expose your Daysy to liquids such as running water.

– Only take measurements in your mouth.

– Do not insert the measuring sensor too far into your mouth.

– Do not take measurements if the housing and/or sensor is broken.

– Do not take measurements if you have an injury in your mouth.

– Do not expose your Daysy to heavy mechanical loads.

– Only take measurements when the USB cable is NOT connected.

– Only charge your Daysy using a standard 5V USB port (IEC 60950-1 compliant)

with a maximum output current of 1A and a maximum power of 4.5W with a cable

shorter than 50cm. Do not take measurements while your Daysy is charging.

– If your Daysy causes irritation to your skin, we recommend you stop using it

immediately and contact our Customer Support as soon as possible.

– Do not stick sharp objects into your Daysy.

– All serious incidents associated with this product should be reported to the

manufacturer and the relevant government authority responsible in the EU

member state.

– Your Daysy is intended for you alone. You should not share it with other

women. If you do wish to pass it on to a friend, you will need to delete your

data ﬁrst and unpair Daysy in the app (if you use it).

– Only pass your Daysy on to another person with all instructions. You

will also ﬁnd the instructions and further useful information available for

download at daysy.me.

– As a user, you can use every feature of your Daysy. You can also clean the

sensor yourself when your Daysy is switched off.

– Your Daysy is not a contraceptive.

– Keep Daysy away from children and pets.

english

All the features at a glance*

* Page13 shows you all the important display combinations

Protective cap

Measuring

sensor

Activation button

Activation ring (blue)

Menstruation query (violet)/

Bluetooth®mode (blue)

Fertile/possibly

Fertile (red)

Ovulation prediction

(ﬂashing red)

Infertile (green)

Learning phase/

cycle ﬂuctuation (yellow)

Possible pregnancy

(red, green, yellow)

Micro USB

port

Step1: ChargeyourDaysy

1. Connect your Daysy to the micro USB cable supplied in your package and

the cable to a USB port. Make sure it is a 5V port that does not supply more

than 1A current.

2. Press the activation button to see the charging status. The blue lights

moving from bottom to top indicate Daysy is charging. Daysy will enter

standby mode after 60 seconds but will continue charging.*

3. All blue lights remain illuminated when Daysy is fully charged. Simply press

the activation button once to check the status. (A low battery condition is

indicated by all blue lights ﬂashing.)

4. Disconnect the cable from your Daysy. You can now begin using your Daysy.**

* Do not measure or try to sync whilst Daysy is charging.

** You can start measuring at any time in your cycle.

Autres manuels pour daysy

Table des matières

Langues :

Autres manuels Valley Electronics Produit de soins personnels

Valley Electronics

Valley Electronics daysy Manuel utilisateur