Page 8 of 42 Version 1.00
November, 2004
BC Series Controllers
Operation Manual
1. With display showing “System OK”, press and hold MENU button for 5
seconds. Release MENU button when Welcome screen appears.
2. Press the UP button to scroll to CHOOSE: >LOGIN and press MENU.
Display shows PASSWORD ->0000<-, and first 0 flashes.
3. Press MENU to change first digit to desired value. Each press of the MENU
button advances by one. Pressing UP selects that value for the first digit,
which stops flashing, and advances to the second digit, which will begin to
flash.
4. Repeat procedure above for all four digits.
5. Press UP to select <, which will then flash, and press MENU to enter the
password.
6. Controller displays OK: ADMIN for 5 seconds.
5Presets
Once you have logged into the controller, you can set all controller values to one of three
preset values by selecting either PRESET A, PRESET B, or PRESET C. This can be
done by pressing the UP button to scroll to CHOOSE: PRESET and press the MENU
button. This will enter the preset submenu. Press the UP button to scroll to the
appropriate preset value, and press the MENU button, you may need to hold it for about 1
or 2 seconds. The controller will exit out to the previous menu, indicating that the preset
values have been set.
EXIT INSTRUCTIONS: Press the UP button to scroll to CHOOSE: EXIT and press the
MENU button. This will return you to the SYSTEM OK menu.
6Controller Configuration Menu
Once you have logged into the controller, you can make adjustments to any of the
following setpoints by pressing the UP button to scroll to CHOOSE: CONFIG and
pressing the MENU button. This will enter the configuration submenu list. The
configuration menu can be navigated by pressing the UP button to scroll through all the
menu choices.
EXIT INSTRUCTIONS: You can exit and logout of the configuration menu by pressing
the UP button to scroll to the end of the menu string and pressing the MENU button at the
BACK TO MAIN screen. This will send you back to the main menu. All changes
require logging out to take effect. Press UP button to scroll to CHOOSE: EXIT and press
the MENU button to exit back to the SYSTEM OK menu.
6.1 Language
The language menu allows you to select the controller’s displayed language.
