V-tech Magic Paws Manuel utilisateur
1
Dear Parent:
At VTech®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTech®infant and toddler learning products
encourage your child’s natural growth and discovery skills.
When it comes to providing electronic learning products that
enlighten, entertain and develop minds, at VTech®we see the
potential in every child.
2
INTRODUCTION
ThankyouforpurchasingVTech®MagicPaws™learningtoy! Thisproduct
is one of a family of high quality electronic learning toys. We at VTech®
are committed to providing the best possible products to entertain and
educate your child. Should you have any questions or concerns, please
call our Consumer Services Department at 1-800-521-2010 in the U.S.
or 1-800-267-7377 in Canada.
The VTech®Magic Paws™ is a soft and cuddly plush bear designed for
infants from ages birth and up. This friendly bear has four interactive
sensors that trigger friendly phrases, lights, sound effects, and music.
The VTech®Magic Paws™ will act as a companion throughout baby’s
early years of development.
Proximity
Sensor
Paw
Press
Foot Press
Button
Velcro Opening
(the battery box
is stored inside)
Playtime/Off/
Soothing Mode
Selector switch
Paw Press
Button
Foot Press
Button
High/Low
Volume Switch
Light-up
Paws
Light-up
Paws
3
INCLUDED IN THIS PACKAGE
1. One VTech®Magic Paws™ learning toy
2. One instruction manual
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned off.
2. Open the velcro opening located on the
back of the unit. Locate the battery cover
onthe back ofthe unit. Use ascrewdriver
to loosen the screw.
3. Install 2 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replacethebatterycoverandtightenthescrewtosecurethebatterycover.
BATTERYNOTICE
• Installbatteriescorrectlyobservingthepolarity(+,-)signstoavoidleakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove batteries from the equipment when the unit will not be used
for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are
to be used.
4
WEDONOTRECOMMENDTHEUSEOFRECHARGEABLEBATTERIES.
NOTE: Iffor any reason the program/activitystopsworking,pleasefollow
these steps:
1. Turn the unitOFF.
2. Interrupt the power supply by removing the batteries.
3. Lettheunitstandforafewminutes,thenreplacethebatteries.
4. Turn the unitON.The unitshould now beready toplay again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
CRIB ATTACHMENT
To attach The VTech®Magic Paws™ to the crib,
unfasten the velcro bow tie and attach to the side
of the crib.
TO BEGIN PLAY
1. Slide the PLAYTIME/OFF/SOOTHING
MODE SELECTOR SWITCH to the
PLAYTIME MODE ( ) or SOOTHING
MODE ( ) position to turn the unit ON.
You will hear a short tune. The LIGHT-UP
PAWS will flash with the sound.
2. To adjust the volume, slide the HIGH / LOW
VOLUME CONTROL SWITCH to the ( )
position for HIGH VOLUME or the ( )
positionforLOW VOLUME.
5
3. Slide the PLAYTIME/OFF/SOOTHING
MODE SELECTOR SWITCH to the OFF ( )
position to turn the unit OFF.
Note: The VTech®Magic Paws™learning toy
will automatically turn off after about 30
seconds without input. The unit can be turned on again by
pressinganybutton,shakingthebear,oractivatingthesoundsensor.
ACTIVITIES
PLAYTIME MODE
1. Turn on the unit by sliding the PLAYTIME/
OFF/SOOTHING MODE SELECTOR
SWITCHtothe PLAYTIME MODE position
( ). You will hear a short tune. The
LIGHT-UPPAWS will flashwiththesound.
2. Wave your hand in front of the bow tie to
activatetheproximitysensor. Youwill hear
“Peek-a-boo” and a giggle sound effect.
TheLIGHT-UPPAWSwillflashwiththesound.
3. Press one of thePAW PRESS BUTTONS
tohear “Patty-Cake, Patty-Cake”followed
by a short tune.The LIGHT-UP PAWS will
flash from paw to paw.
“Peek-a-boo”
“Patty-Cake,
Patty-Cake”
6
“Koochy coo”
4. PressoneoftheFOOTPRESSBUTTONS
to hear either “Koochy coo” or a giggle
sound effect. The LIGHT-UP PAWS will
flashaccordingtowhichfoot waspressed.
5. Gently shake the bear to hear “Weee!” or
random melodies. The LIGHT-UP PAWS
will flash with the sound.
6. Gently shake the bear while a melody is
playing to hear “Weee!” play on top of the
melody.
7. The VTech®Magic Paws™ will automatically shut-off after several
seconds without input. The unit can be re-activated by the sound
sensor. Whenany background noiseisdetected,youwillhear "Grrr!",
"Bear Hug!" The LIGHT-UP PAWS will flash with the sound.
SOOTHING MODE
1. Turn on the unit by sliding the PLAYTIME/
OFF/SOOTHING MODE SELECTOR
SWITCH to the SOOTHIING MODE ( ).
You will hear “Shhhh, be beary beary
quiet!” followed by a short tune. The
LIGHT-UPPAWS will flash with thesound.
“Weee!”
“Weee!”
Shhh...
7
2. Wave your hand in front of the bow tie to
activatetheproximitysensor. Youwillhear
“Night-Night!” or “Shhh, Quiet!” The
LIGHT-UPPAWS willflashwiththesound.
3. Pressoneof thePAW PRESS BUTTONS
tohearrandom melodies. TheLIGHT-UP
PAWS will flash with the sound.
4. PressoneoftheFOOTPRESSBUTTONS
to hear either “Koochy coo!” or a giggle
sound. The LIGHT-UP PAWS will flash
according to which foot was pressed.
5. PressoneoftheFOOTPRESSBUTTONS
while a melody is playing to hear “Koochy
coo!” or a giggle sound play on top of the
melody.
6. Gently shake the bear to hear "Shhhh" or
akisssoundeffect.TheLIGHT-UPPAWS
will flash with the sound.
“Night-Night!”,
“Shhh, Quiet!”
“Koochy coo!”
“Koochy coo!”
“Shhhh”
8
7. Gently shake the bear while a melody is
playing to hear “Shhhh” or kiss sound play
on top of the melody.
8. The VTech®Magic Paws™ will automatically shut-off after several
seconds without input. The unit can be re-activated by the sound
sensor. Whenanybackgroundnoiseisdetected,youwillhear"Shhhh,
be beary quiet!" and random melodies. The LIGHT-UP PAWS will
flash with the sound.
PLAYTIME MELODIES
• Mary Had a Little Lamb
• Ring Around the Rosie
• Pop Goes the Weasel
• Skip to My Lou
SOOTHING MELODIES
• Cannon in D
• Fur Elise
• Largo
• Lullaby
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit away from direct sunlight and heat source.
“Shhhh”
9
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
IMPORTANT NOTE
Creating and developing infant/toddler products is accompanied by
a responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes occur. It is
important for you to know that we stand behind our products and
encourageyou to callour Consumer Services Departmentat 1-800-
521-2010intheU.S.or1-800-267-7377inCanadawithanyproblems
and/orsuggestions that youmight have. Our service representative
will be happy to help you.
NOTE:
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply within
the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC Rules, which are designed to
provide reasonable protection against such interference in a residential
installation. However,thereisnoguaranteethatinterferencewillnotoccur
in a particular installation. If this equipment does cause interference with
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measure:
• reorient the receiving antenna
• relocate this product with respect to the receiver
• move this product away from the receiver
Table des matières
Autres manuels V-tech Jouet
V-tech
V-tech Soothing Songs Lovey Manuel utilisateur
V-tech
V-tech Spinning Spiral Tower Playset Manuel utilisateur
V-tech
V-tech CoComelon Toot-Toot Drivers Grocery Store Track... Manuel utilisateur
V-tech
V-tech Discovery Nursery Farm Manuel utilisateur
V-tech
V-tech Bearthoven Manuel utilisateur
V-tech
V-tech Sing With Me School Bus Manuel utilisateur
V-tech
V-tech Talking Whiz Kid Power Mouse Manuel utilisateur
V-tech
V-tech My Playful Kitten Instructions de montage
V-tech
V-tech Roll & Lights Bug Manuel utilisateur
V-tech
V-tech Go Go Smart Wheels - Airport Playset Manuel utilisateur
V-tech
V-tech Slimline Manuel utilisateur
V-tech
V-tech See & Surprise Laptop Manuel utilisateur
V-tech
V-tech Power Vision Manuel utilisateur
V-tech
V-tech Learn & Dance Interactive Zoo Manuel utilisateur
V-tech
V-tech Write & Learn Smartboard Manuel utilisateur
V-tech
V-tech Language Lab Laptop Manuel utilisateur
V-tech
V-tech SWITCH&GO DIONS Burnout the Velociraptor Manuel utilisateur
V-tech
V-tech SmartVille - Ice Cream Color Shop Manuel utilisateur
V-tech
V-tech V.Smile Motion: Wild Waves Manuel utilisateur
V-tech
V-tech Magic Wand Laptop Manuel utilisateur
