V-tech Drill & Learn Toolbox Deluxe Instructions de montage
Drill & Learn Toolbox™ Deluxe
Parent’s Guide
US
91-003461-021
2
3
57
12
11
14
17
18
19
13
15
16
10
5
3
1
2
4
6
8
9
INTRODUCTION
Thank you for purchasing the Drill & Learn Toolbox™Deluxe.
Pretend to build or repair things with the drill, screwdriver, saw,
hammer, wrench and screw plates while learning cool tool facts,
numbers, colors, objects and more. Use the project cards, follow the
instructions and pretend to repair different objects. The handle makes
it easy to take the fun on the go!
1Toolbox 8Tool Buttons
2Screws 9Mode Selector
3Card Slot 10 Hammer
4Tray Holes
5Off/Volume Switch
6Nails
7Electronic Project Tray
Direction Switch
11
Drill
12
Wrench
13
Project Cards
14
15 Saw
Flashlight
16
Screwdriver
17
Screw Plates
18
Walkie-Talkie
19
3
INCLUDED IN THIS PACKAGE
• One Drill & Learn Toolbox™Deluxe
• One electronic project tray
• One drill
• One hammer
• One wrench
• One saw
• One screwdriver
• One walkie-talkie
• One flashlight
• Five screws
• Four nails
• 14 screw plates
• Two double-sided cards
• One parent’s guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important information.
WARNING
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
4
Unlock the Packaging Locks
1. Rotate the packaging lock 90 degrees counterclockwise.
2. Pull out the packaging lock and discard.
1. Turn the packaging lock counterclockwise several times.
2. Pull out the packaging lock and discard.
WARNING
Do not insert anything other than the included SCREWS
or NAILS into the TRAY HOLES of the ELECTRONIC
PROJECT TRAY. Doing so may damage the ELECTRONIC
PROJECT TRAY.
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the bottom
of the unit, use a screwdriver to loosen the
screw and open the battery cover.
3. Remove old batteries by pulling up on one
end of each battery.
4. Install 2 new AA batteries following the
diagram inside the battery box.
5. Replace the battery cover and tighten the screw to secure.
5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under
adult supervision.
6
ACTIVATING NORMAL PLAY MODE
When the product is taken out of the packaging, turn it on and insert
a Project Card. You will hear a beep and a voice confirming you are
in normal play mode.
PRODUCT FEATURES
1. Off/Volume Switch
To turn the unit On or adjust the volume,
slide the Off/Volume Switch to Low or High.
To turn the unit Off, slide the switch to Off.
2. Mode Selector
Slide the Mode Selector to choose an
activity. Choose from three activities.
3. Tool Buttons
Press the Tool Buttons to learn about the
tools, their functions, hear fun sounds or
answer questions.
4. Tray Holes
Drill the Screws or hammer the Nails into
the Tray Holes to play or answer questions.
5. Double-Sided Project Cards
Insert either card into the Card Slot to play
an activity.
7
6. Drill
Use the Drill to drill Screws into the Tray
Holes. The Drill can turn clockwise or
counterclockwise by sliding the Direction
Switch on the side.
7. Accessories
Place the Screw Plates on the Tray
and align with the Tray Holes. Use the
Screwdriver,Hammer or Wrench to insert
the Nails or Screws into the Tray Holes.
Use the role-play Walkie-Talkie to talk with
friends or pretend to turn on the Flashlight.
8. Automatic Shut-Off
To prolong battery life, the Drill & Learn Toolbox™ Deluxe will
shut off automatically after several minutes without input. The
unit can be turned on again by sliding the Off/Volume Switch or
sliding the Mode Selector.
The unit will also automatically turn off when the batteries are
very low.
8
ACTIVITIES
1. Free Play Mode
Press the three Tool Buttons to learn about tools, sounds and colors.
Use the Drill, Hammer or Wrench to drill Screws or hammer Nails
into the Tray Holes. If no Project Card is inserted, you will hear
sounds and phrases. If a Project Card is inserted into the Card Slot,
drill the Screws or hammer the Nails into the Tray Holes to learn
about numbers, more than or less than, colors, spelling, vehicles,
objects and more.
After every five actions (drill a screw, hammer a nail, etc.), a reward
song plays.
2. Quiz Mode
It’s time to show off your fix-it skills! Listen to the questions and
answer them by using the tools or pressing the Tool Buttons.
3. Music Mode
Press the Tool Buttons or insert a Project Card to hear songs
about tools, numbers, colors and objects.
9
SONG LYRICS
Colors Card
Let’s shout out colors, to the beat.
Red, yellow, white, pink and green,
I’m a super-duper fix-it machine.
Construction orange, purple, brown and blue,
Amazing color rhymes from me to you!
Numbers Card
One, two, grab a screw.
Three, four, drill some more.
Five, six, it’s all fixed!
Seven, eight, nine, feeling fine!
Vehicles Card
Things that go fast and slow,
Need lots of care.
A patch here, a mend there,
All the fixing, we can share!
Housewares Card
Oh I love to fix everything!
I’m never without my toolbox.
No project is too big or too small,
Oh I love to fix everything.
10
Wrench Song
Righty tighty, lefty loosey,
I love my trusty wrench.
Righty tighty, lefty loosey,
It lives inside my tool bench!
Hammer Song
I need a nail and a hammer.
I need a hammer and a nail.
I have my tools and I’m on the fix-it trail!
Drill Song
We have a drill and a screw,
Whaddya want to do?
Let’s build something for
Me and you!
Table des matières
Autres manuels V-tech Jouet
V-tech
V-tech SoundLearning Talking Keyboard Manuel utilisateur
V-tech
V-tech Go! Go! SmartWheels Revved Up Stunt Spiral Instructions de montage
V-tech
V-tech Power Zone 2000 Manuel utilisateur
V-tech
V-tech Peppa Pig Learn & Explore Tablet 5466 Instructions de montage
V-tech
V-tech Toot-Toot Drivers CustomisablePeople Carrier Manuel utilisateur
V-tech
V-tech Go! Go! Smart Wheels Revved Up Raceway Instructions de montage
V-tech
V-tech Master Video Painter Manuel utilisateur
V-tech
V-tech V.Smile Pocket Power Pack Manuel utilisateur
V-tech
V-tech Fundamentals od Learning Math Lab Mode d’emploi
V-tech
V-tech Turn & Sing Flower Manuel utilisateur
V-tech
V-tech Go! Go! Smart Wheels Press & Race SmartPoint... Instructions de montage
V-tech
V-tech Count & Wobble Cody Manuel utilisateur
V-tech
V-tech B00KS11IRK Manuel utilisateur
V-tech
V-tech Soothing Ocean Slumbers Mobile Manuel utilisateur
V-tech
V-tech Pull & Play Kitten Manuel utilisateur
V-tech
V-tech SWITCH&GO DINOS Viper the Velociraptor Manuel utilisateur
V-tech
V-tech Talking Whiz Kid French Manuel utilisateur
V-tech
V-tech Me Mo Mo Manuel utilisateur
V-tech
V-tech I See Me Lion Mirror Manuel utilisateur
V-tech
V-tech 80-069041 - Electronics V.Smile Baby Infant... Manuel utilisateur
