V-tech Vt5831 Manuel utilisateur

Whenusingyourtelephoneequipment,basicsafetyprecautionsshouldalways

be followed to reduce the risk of fire, electric shock and injury, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosolcleaners.Usea damp cloth for cleaning.

4. Donot use this product near water(forexample,near abathtub,kitchen sink, or

swimmingpool).

5. Do not place this product on an unstable cart, stand, or table.The product may

fall,causingserious damage to the product.

6. Slotsandopeningsinthecabinetandthebackorbottomareprovidedforventilation.To

protect it from overheating, these openings must not be blocked by placing the

producton the bed, sofa,rug,or other similar surface.Thisproduct should never

be placed near or over a radiator or heat register.This product should not be

placedin a built-in installation whereproperventilationisnot provided.

7. Thisproductshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthe

marking label. If you are not sure of the type of power supply to your home,

consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product

where the cord willbeabused by persons walking on it.

9. Never push objects of any kind into this product through cabinet slots as they

maytouch dangerous voltagepoints or shortoutparts that could result in a risk

of fire or electric shock. Never spill liquid of any kind on the product.

10. Toreducetherisk of electricshock,donotdisassemblethisproduct.Openingor

removing cabinet parts other than specified access doors may expose you to

dangerous voltages or other risks. Incorrect reassembling can cause electric

shock when the appliance is subsequently used.

11. Do not overload wall outlets and extension cords as this can result in the risk of

fire or electric shock.

Important Safety Instructions

12. Unplugthis product from the walloutlet and contactVTECH under the following

conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the operating

instructions. Adjustonlythose controls that are covered by the operating

instructions, because improper adjustment of other controls may result in

damage and will often require extensive work to restore the product to

normaloperation.

E. If the product has been dropped and the cabinet has been damaged.

F. If the product exhibits a distinct change in performance.

13. Avoidusingatelephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

14. Donot usethisor anycordlesstelephone toreport agasleak inthevicinity ofthe

leak.

VTECH COMMUNICATIONS INC.

CUSTOMER SERVICE : 1-800-595-9511. In Canada, call VTech Electronics Ltd.at

1-800-267-7377.

BEFORE USINGYOURVT5831 SYSTEM, CAREFULLY PEEL OFF

THE PROTECTIVE FILM, COVERINGTHE DISPLAYS.

SAVE THESE INSTRUCTIONS

Important Safety Instructions

TheVT5831 is anadvancedcordlesstelephonethat operatesinthe 5.8GHz frequency

range.Your VT5831 is capable of supporting up to a maximum of 6Handsets.Using

additionalHandsets, up tothreepeoplecan be conferenced on a call(2Handsets and

the Base Speakerphone), or two extensions can be conferenced on a call, while two

otherextensionscan be talking internally,using theIntercomfeature.

This manual is designed to familiarize you with the VT5831 cordless telephone.We

stronglyrecommend you read the manual before usingyourphone.

To order additional system Handsets (model# VT 5820), battery packs, or headsets,

callVTech CommunicationsInc.at1-800-595-9511.

Introduction

STOP!!

If you have questions about this product, or

if you’re having difficulty with setup or

operation, do not return your phone to the

store. Call our Customer Support Center at

1-800-595-9511

In Canada, call

1-800-267-7377

To purchase replacement battery packs,callVTechCommunicationsInc.

at1-800-595-9511.InCanada, callVTech Electronics Ltd.at1-800-267-7377.

Parts Check List

1.Base Unit

2.Handset

3.Handset Charger

4.Base AC Power Adapter

5.Telephone LineCord

6.Belt Clip

7.BaseWall Mounting Bracket

8.ChargerWallMounting Bracket

9.Owner’sManual

10.Battery Pack

Telephone Line Cord

Base AC Power Adapter

Base Wall Mounting

Bracket

Belt Clip

Handset

Base Unit

Battery Pack

Owners Manual

OWERS MAUAL

Charger Wall

Mounting Bracket

Handset Charger

1.Antenna

2.Earpiece

3.HeadsetJack (2.5mm)

4.On(Flash)

5.Dialing Keys (0-9, , #)

6.Speakerphone

7.MessageWaiting LED

The Handset Layout

8.LCD Display

9.Soft Keys

10.Volume

11.Off (Clear)

12.Sound Select

13.Microphone

1.Antenna

2.LCD Display

3.Clear

4.In Use

5.Flash

6.Hold

7.Redial

8.Mute

9.MessagesLED

The Base Unit Layout

10.Intercom

11. Soft keys

12.Speaker Phone

13.Dialing Keys (0-9, , #)

14.Volume Keys

15.Telephone Jack

16.DC Connector

17.SpareBatteryDrawer

18.Spare Battery Release

15 17

Connecting power to Base Unit/Handset Charger

1. Plugthe ACpoweradapter intoanelectrical outlet,andthe DCconnectorintothe

bottomoftheBaseUnit.

2. Choosethe location foryourHandsetCharger, and plug itspowersupplyintoan

electricaloutlet.

Setup

GETTING STARTED

Setup

GETTING STARTED

Followthestepsbelow:

1. Remove the battery cover by

pressing on the indent and sliding

downward.

2. Place the new battery pack in the

Handset with the metal contacts

aligned with the charge contacts

inthe battery compartment.

3. Replacethebatterycoverbysliding

itupwards.

4. If the new battery pack is not

alreadycharged,placethe Handset

in its Charger, and allow it to

charge for 12 hours. After initial

charge, a maintenance charge of

8hoursshouldbesufficient.

The original Handset that is shipped with yourVT5831 system will be

automatically registered to the Base.This Handset is HANDSET 1.

As you register additional Handsets to the system, they will be assigned extension

numbers inthe following order: HANDSET 2, HANDSET 3,etc.

Whenevera charged Handset battery pack is installed,theHandsetwillautomatically

begin SEARCHING FOR BASE (if previously registered), or it will prompt you to

ENTER BASE ID to register the new Handset.

Installation of Battery Pack in Handset

Charging of the Handset Battery Pack

TheHandset ofyourVT5831 cordlesstelephone ispoweredbyarechargeablebattery

pack.It charges automatically whenever the Handset is in its charger.

You should charge the battery pack for 12 hours when you first receive your

phone.You’llknowthe batterypackneeds charging when:

•The low battery message is displayed :

•TheHandsetseemscompletely dead,the

LCDis completelyclearanddoes notac-

tivate when you press the keys.

GETTING STARTED

Connecting to phone line

Plug one end of the telephone line cord into the jack

on the back of the Base Unit. Plug the other end of

this cord into the wall jack.

Checking for dial tone

Afterthebattery ischargedpressON ontheHandset.

The Phone icon will appear on the Handset

display,and youwillheardialtone.Ifnot,seeInCase

of Difficulty.

Tone/Pulse selection

Your VT5831 is preset for tone dialing.

See BASE SETTINGS for details.

CAUTION: Use only the Vtech power supply

providedwith your telephone.

IMPORTANT:

FORMAXIMUMPERFORMANCEOFYOUR

CORDLESSTELEPHONE SYSTEM:

1. Choosea centrallocationfor yourBaseUnit.

2. Install your Base Unit and Extension Handsets

away from electronic equipment, such as

personal computers, television sets and

microwaveovens.

3. Inlocationswheretherearemultiplecordless

telephones,separatebaseunitsasmuch as

possible.

4. Installyour telephone equipmentawayfrom

heatsourcesandsunlight.

5. Avoid excessive moisture, dust or extreme

cold.

IMPORTANT:

1. Do not dispose of a battery pack in a fire, the cell may explode.

2. Do not open or mutilate the battery pack.Toxic substances may be released,

causing harm to eyes or skin.

3. Exercise care inhandling battery packs in order to prevent an accidental short

ofthecharge contacts, potentially causing the battery packto overheat.

4. Do not disposeofthisbatterypackintohouseholdgarbage.Pleaserefertothe

informationconcerning proper battery recycling.

Setup

Spare Battery Charger/Power Backup Feature

GETTING STARTED

The VT5831 uses the spare battery charger in the Base Unit to provide operational

backup in the event of a power failure.With a fully charged battery pack in the spare

batterycharger, youwill still be abletoplaceandreceivecallsfromtheHandset only,

for up to 2 1/2 hours.

Thesparebatterypackcanalsobe usedtoreplaceadrainedhandsetbattery,ensuring

uninterrupteduse.Thesparebatterypackisoptionalandpurchasedseparately.

NOTE :

When using the VT5831 during Power Backup mode, audio quality may be

compromisedduetoreducedPoweravailability.

1. Open the spare battery charger by

pressingthereleasebutton,located

ontheleft-handsideoftheBaseUnit.

Adrawerwillopentorevealthespare

battery compartment.

2. Place a battery pack in the drawer

with the charge contacts facing up

andto the right.

3. Push the drawer closed.

Thespare battery chargertakes24 hours

tofullycharge a drained battery.

To order battery packs,headsets and additional Handsets (modelVT 5820),

callVtech Customer Service at:

1-800-595-9511.

In Canada, call

1-800-267-7377.

Autres manuels pour vt5831

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels V-tech Téléphone sans fil

V-tech

V-tech vt 1030 - V-tech Microphone Unidirectional Manuel utilisateur

V-tech

V-tech USB 7200 Manuel utilisateur

V-tech

V-tech VTECH LS6426-4 Manuel d'installation et d'exploitation

V-tech

V-tech IA5874 Guide de l'utilisateur

V-tech

V-tech DS6673-2 Manuel utilisateur

V-tech

V-tech VT-1910c Manuel utilisateur

V-tech

V-tech IA5854 Guide de l'utilisateur

V-tech

V-tech i6767 - 5.8 Digital GHz Two Handset Cordless Phone... Manuel utilisateur

V-tech

V-tech DS6771-3 Manuel utilisateur

V-tech

V-tech gz2336 Guide de l'utilisateur

V-tech

V-tech CS5113 Manuel utilisateur

V-tech

V-tech CS5319 Manuel utilisateur

V-tech

V-tech i6725 Manuel utilisateur

V-tech

V-tech CS6648-2 Manuel utilisateur

V-tech

V-tech CS6719 Manuel utilisateur

V-tech

V-tech 80-6101-00 Manuel utilisateur

V-tech

V-tech DS6121 Manuel utilisateur

V-tech

V-tech 3864-01 Manuel utilisateur

V-tech

V-tech HSH801 Manuel utilisateur

V-tech

V-tech ia5870 Manuel utilisateur

V-tech

V-tech CS6328-2 Manuel utilisateur

V-tech

V-tech Cordless Telephone Manuel utilisateur

V-tech

V-tech DS3101 Manuel utilisateur

V-tech

V-tech DS6673-6C Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques

3Com

3Com NBX Manuel utilisateur

Panasonic

Panasonic KX-TGK210HK Manuel utilisateur

Panasonic

Panasonic KX-TCA181EX Manuel utilisateur

BT FREESTYLE 3200 Manuel utilisateur

AT&T

AT&T CL84102 Manuel utilisateur

BREZZICNI

BREZZICNI CL-3622 Manuel utilisateur

Panasonic

Panasonic KX-TG1831NZ Manuel utilisateur

Panasonic

Panasonic KX-TG7301E Manuel utilisateur

Furuno

Furuno FM-4721 Manuel utilisateur

Sanyo

Sanyo CLT-J70 Manuel utilisateur

Amplicomms

Amplicomms BigTel 201 Manuel utilisateur

GE 26992 Manuel utilisateur

AT&T

AT&T E1812B Manuel utilisateur

Sanyo

Sanyo CLT-670 Manuel utilisateur

GE 15432970 Manuel utilisateur

Curtis

Curtis TC595 Manuel utilisateur

Gigaset

Gigaset Gigaset 3000 Micro Manuel utilisateur

Poly

Poly VVX D230 Guide de configuration

V-tech vt5831 Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques