V-tech V2675 Manuel utilisateur
1
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen
sink, or swimming pool).
5. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided
for ventilation. To protect it from overheating, these openings must not be
blockedbyplacingtheproductonthebed,sofa,rug,orothersimilarsurface.
Thisproductshouldneverbeplacednearoroveraradiatororheatregister.
This product should not be placed in a built-in installation where proper
ventilation is not provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be abused by persons walking on it.
9. Never push objects of any kind into this product through cabinet slots as
theymaytouch dangerous voltage pointsorshort out parts thatcouldresult
ina risk offire orelectric shock. Neverspill liquid ofany kindon the product.
10. To reduce the risk of electric shock, do not disassemble this product, but
take it to an authorized service facility. Opening or removing cabinet parts
other than specified access doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock when the
appliance is subsequently used.
11. Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
91-5358-10-00.p65 1/22/2003, 5:20 PM1
2
Important Safety Instructions
12. Unplug this product from the wall outlet and refer servicing to an authorized
service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
instructions.Adjustonlythosecontrolsthatarecoveredbytheoperating
instructions,because improperadjustment ofother controlsmay result
in damage and will often require extensive work by an authorized
technician to restore the product to normal operation.
E. If the product has been dropped and the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lighting.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
VTECH COMMUNICATIONS INC.
CUSTOMER SERVICE at 1-800-595-9511. In Canada, call VTech
Telecommunications, Ltd. at 1-800-267-7377.
SAVETHESE INSTRUCTIONS
91-5358-10-00.p65 1/22/2003, 5:20 PM2
3
The v 2656 is an advanced cordless telephone that operates in the 2.4GHz
frequency range. Your v 2656 is capable of supporting up to a maximum of
4 Handsets. Using additional Handsets, 2 people can be conferenced on
a call, while two other extensions can be talking internally, using the Intercom
feature.
This manual is designed to familiarize you with the v 2656 cordless telephone.
We strongly recommend you read the manual before using your phone.
To order additional Handsets (model v 2600), battery packs, or headsets,
call VTech Communications Inc at 1-800-595-9511.
Introduction
IMPORTANT
Please record the Base ID#(BS ID) printed on the underside of the v 2656
Base in the space below. Please be certain to include all 15 digits/characters.
Base ID#
STOP!!
If you have questions about this product, or
if youíre having difficulty with setup or
operation, do not return your phone to the
store. Call our Customer Support Center at
1-800-595-9511
In Canada, call1-800-267-7377
91-5358-10-00.p65 1/22/2003, 5:20 PM3
4
Parts Check List
5. Battery Pack
6. Wall Mounting Bracket
7. User's Manual
1. Base Unit
2. Handset
3. AC Power Adapter
4. Telephone Cord
P
A
G
E
AC Power Adapter
Telephone Cord
Battery Pack
Handset Base Unit
Users Manual
Wall Mounting Bracket
To purchase replacement battery packs, call Vtech Communications, Inc. at
1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at
1-800-267-7377.
91-5358-10-00.p65 1/22/2003, 5:20 PM4
5
The Handset Layout
3
2
6
11
10
12
5
1
7
8
9
4
1. Antenna
2. Earpiece
3. Scroll Keys
4. Headset Jack (2.5mm)
5. On (Flash)
6. Dialing Keys (0-9, *, #)
7. Handsfree Speakerphone
8. LCD Display
9. Select /Menu
10. Off (Clear)
11. Intercom
12. Microphone
91-5358-10-00.p65 1/22/2003, 5:20 PM5
6
The Base Unit Layout
13
12
14
11
1
4
7
8
9
5
3
2
6
10
VTECH TE ECOMMUNICATIONS TD.
DC 9V 500mA
C ASS 2 POWER SOURCE ON Y
CORD ESS TE EPHONE
15
16
P
A
G
E
1. Record/Memo
2. Time/Set
3. Change
4. Menu
5. Charge Contacts
6. Delete
7. Page
8. Charging Indicator
9. In Use Indicator
10. Repeat/Slow key
11. Answer ON/OFF key
12. Skip/Quick key
13. Volume Keys
14. Mailbox Keys
15. DC Connector
16. Telephone Jack
91-5358-10-00.p65 1/22/2003, 5:20 PM6
7
Setup
Connecting Power to Base Unit
Plug the AC power adapter into an electrical outlet, and the DC connector into the
back of the Base unit.
CAUTION: Use only the VTech power supply provided with your VTech Unit.
To AC outlet
To telephone
jack
To telephone outlet
VTECH TE ECOMMUNICATIONS TD.
DC 9V 500mA
C ASS 2 POWER SOURCE ON Y
CORD ESS TE EPHONE
Getting Started
P
A
G
E
IMPORTANT:
FOR MAXIMUM PERFORMANCE OF YOUR
CORDLESS TELEPHONE SYSTEM:
1.Choose a central location for your Base Unit.
2.Install your Base Unit and Extension Handsets
away from electronic equipment, such as
personal computers, television sets and
microwave ovens.
3.In locations where there are multiple cordless
telephones, separate base units as much as
possible.
4.Install your telephone equipment away from
heat sources and sunlight.
5.Avoidexcessivemoisture,dustorextremecold.
91-5358-10-00.p65 1/22/2003, 5:20 PM7
8
Setup
Getting Started
Follow the steps below:
1. Removethebatterycoverbypressing
on the indent and sliding downward.
2. Align the two holes in plug with the
socket pins. Insert the plug into
socket. Place the battery pack into
thecompartmentwiththewiresinone
of the bottom corners of the battery
pack.
3. Replace the battery cover by sliding
it upwards.
4. If the new battery pack is not already
charged, place the Handset in the
Base unit, or a remote charging
stand, and allow it to charge for 12
hours. After initial charge, a
maintenancechargeof8hoursshould
be sufficient.
The original Handset that is shipped with your v 2656 system will be
automatically registered to the Base. This Handset is HANDSET 1.
As you register additional Handsets to the system, they will be assigned extension
numbers in the following order: HANDSET 2, HANDSET 3, and finally HANDSET 4.
After a Handset battery pack is installed, the Handset will automatically begin
SEARCHING FOR BASE (if previously registered), or it will prompt you to
ENTER BASE ID to register the new Handset.
Installation of Battery Pack in Handset
91-5358-10-00.p65 1/22/2003, 5:20 PM8
9
Getting Started
Charging Of Handset Battery Pack
The Handset of your v 2656 cordless telephone is powered by a rechargeable
battery pack. It charges automatically whenever the Handset is in the Base Unit.
Maximum talk time on a full charge is 8 hours. Maximum standby time is 5 days.
You should charge the battery pack for 12 hours when you first receive your
phone. You'll know the battery pack needs charging when:
ï The low battery message is
displayed:
ï The handset seems completely
dead, the LCD is completely
clearanddoesnotactivatewhen
you press the keys.
IMPORTANT:
1. Do not dispose of a battery pack in a fire, the cell may explode.
2. Donotopenormutilatethebatterypack.Toxicsubstancesmaybereleased,
causing harm to eyes or skin.
3. Exercise care in handling battery packs in order to prevent an accidental
short of the charge contacts, potentially causing the battery pack to
overheat.
4. Do not dispose of this battery pack into household garbage. Please refer
to the following information concerning proper battery recycling.
Connecting to phone line
Plug one end of the telephone line cord into the jack on the bottom of the
Base unit. Plug the other end of this cord into the wall jack.
Checking for dial tone
After the battery is charged press ON on the Handset. The Phone icon
will appear on the Handset display, and you will hear dial tone. If not, see
In Case of Difficulty.
91-5358-10-00.p65 1/22/2003, 5:20 PM9
10
Getting Started
The Wall Mount bracket is designed for use on standard Wall Mount plates only.
1. Line up the tabs on the wall mount adapter with the holes on the bottom
of the base unit. Snap the wall mount bracket firmly in place.
2. Plug the AC adapter into an electrical outlet, and the DC connector to the
back of the base unit. If the handset battery pack has not been charged
previously, place the handset in the base unit cradle, and allow it to charge
for 12 hours.
3. Connect the telephone line cord to the jack on the bottom of the base
unit, and the other end to the wall jack.
4. Mount the base unit on the wall. Position the base unit so the mounting
studs will fit into the holes on the wall mount bracket. Slide base unit down
on the mounting studs until it locks into place.
To telephone jack
To telephone outlet
AC adapter
VTECH TE ECOMMUNICATIONS TD.
DC 9V 500mA
C ASS 2 POWER SOURCE ON Y
CORD ESS TE EPHONE
2
1
3
Wall Mounting
91-5358-10-00.p65 1/22/2003, 5:20 PM10
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels V-tech Téléphone sans fil
V-tech
V-tech CS6328-2 Manuel utilisateur
V-tech
V-tech Cordless Telephone Manuel utilisateur
V-tech
V-tech VTRZ6052 - 6052 Manuel utilisateur
V-tech
V-tech LS6205 - Cordless Extension Handset Manuel utilisateur
V-tech
V-tech CS6224 Manuel utilisateur
V-tech
V-tech LS5105 - Cordless Extension Handset Manuel utilisateur
V-tech
V-tech USB 7200 Manuel utilisateur
V-tech
V-tech CS6120-2 Manuel utilisateur
V-tech
V-tech DS6421-2 Manuel utilisateur
V-tech
V-tech HSH801 Manuel utilisateur
V-tech
V-tech vt5831 Manuel utilisateur
V-tech
V-tech LS6217 Manuel utilisateur
V-tech
V-tech t2429 - 2.4 GHz Analog Cordless Phone Manuel utilisateur
V-tech
V-tech MI6821 - Cordless Telephone With Caller Id Manuel utilisateur
V-tech
V-tech SN6127 Manuel utilisateur
V-tech
V-tech DS6771-3 Manuel utilisateur
V-tech
V-tech GZ2456 - VMix Cordless Phone Manuel utilisateur
V-tech
V-tech Smart Home-Phone Manuel utilisateur
V-tech
V-tech IP8100-2/81003 Manuel utilisateur
V-tech
V-tech gz2339 Guide de l'utilisateur
