V-tech T2416 Manuel utilisateur

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury

to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub,

kitchen sink, or swimming pool).

5. Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

6. Slotsandopeningsinthecabinetandthebackorbottomareprovided

for ventilation. To protect it from overheating, these openings must

not be blocked by placing the product on the bed, sofa, rug, or other

similar surface. This product should never be placed near or over

a radiator or heat register. This product should not be placed in a

built-in installation where proper ventilation is not provided.

7. This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your dealer or local power

company.

8. Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be abused by persons walking on it.

9. Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock. Never spill liquid of any

kind on the product.

10. Toreducetheriskofelectricshock,donotdisassemblethisproduct,

but take it to an authorized service facility. Opening or removing

cabinet parts other than specified access doors may expose you

to dangerous voltages or other risks. Incorrect reassemb-ling can

cause electric shock when the appliance is subsequently used.

11. Do not overload wall outlets and extension cords as this can result

in the risk of fire or electric shock.

IMPORTANT SAFETY INSTRUCTIONS

12. Unplug this product from the wall outlet and refer servicing to an

authorized service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. Iftheproductdoesnotoperatenormallybyfollowingtheoperating

instructions. Adjust only those controls that are covered by the

operating instructions, because improper adjustment of other

controls may result in damage and will often require extensive

workbyanauthorizedtechniciantorestoretheproducttonormal

operation.

E. If the product has been dropped and the cabinet has been

damaged.

F. If the product exhibits a distinct change in performance.

13. Avoidusingatelephone(otherthanacordlesstype)duringanelectrical

storm. There may be a remote risk of electric shock from lighting.

14. Do not use the telephone to report a gas leak in the vicinity of the

leak.

If you have questions about this product,

or if you're having difficulty with setup or

operation, do not return your phone to the

store. Call our Customer Support Center

at:

1-800-595-9511

In Canada, call

1-800-267-7377

IMPORTANT SAFETY INSTRUCTIONS

Enhanced 2.4GHz Technology -

Dual Band

transmission combines the best of 2.4GHz

and 900MHz technologies, providing enhanced performance over standard cordless

telephones.

About Caller Identification (Caller ID)

This product has a Caller ID with Call Waiting feature that works with service from your

local phone service provider.

Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even

when you’re on another call.

You may need to change your phone service to use this feature. Contact your phone

service provider if:

• You have both Caller ID and Call Waiting, but as separate services (you may need

combined service)

• You have only Caller ID service, or only Call Waiting service

• You don’t subscribe to any Caller ID or Call Waiting services.

You can use this product with regular Caller ID service, and you can use this product’s

other features without subscribing to either Caller ID or combined Caller ID with Call

Waiting service.

There are fees for Caller ID services, and they may not be available in all areas.

This product can provide information only if both you and the caller are in areas offering

Caller ID service, and if both telephone companies use compatible equipment.

Parts Check List:

1. Base Unit 2. Handset

3. AC Power Adapter 4. Telephone Line Cord

5. Battery Pack 6. Belt Clip

7. Owner’s Manual

To purchase replacement battery packs, call VTech Communications, Inc. at 1-800-

595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377.

BEFORE YOU BEGIN

GETTINGSTARTED

To attach To remove

Before You Install

1ChoosealocationfortheBasenearanelectricaloutletandatelephonejack.Thisphone

requiresamodulartelephonejackandastandardelectricaloutlet(110vAC)notcontrolled

by a wall switch. Plug the AC power adaptor into the electrical outlet and the DC

connectortothe jack on the bottomoftheBase Unit.

2InstalltheHandsetbatterypack.Use only Battery Pack providedorrecommendedby

VTech.

a)Remove battery

compartment cover

by pressing on the

indentation and

sliding downward.

b)Align the two holes in the plug with the

socket pins, then snap the plug into

place.

c)Place the battery pack in the

compartment with the wires in one of

the lower corners, as shown in the

illustration.

d)Replace cover by sliding it

up into place.

3Attach the Belt Clip to the cordless Handset (optional).

NOTE: InstalltheBaseUnitawayfromelectronicequipment,suchaspersonalcomputers,

televisionsets ormicrowave ovens.Avoid excessive heat, cold, dust or moisture

INSTALLATION

GETTINGSTARTED

Table/Desk Installation

CONNECT THE

POWER CORD

CONNECT THE

TELEPHONE LINE

CORD

Standard electrical outlet

Modular telephone jack

4 Charge the Handset Battery

PlacetheHandsetin the Base. Charge the battery atleastfor12 hours the first time.

5 Check for Dial Tone

After the batteries are charged, connect the modular telephone cord between a live

phonejackand the jack located onthebottomof the Base Unit. Pick uptheHandset

andpressPHONE. Youshouldhear a DialTone.

6 Set the Dial Mode

Ifyouhavetouch tone service, the phone is readytouseas soon as the batteries are

charged.

Ifyouhavedial pulse (rotary) service, you’ll need tochangethedial mode.

• PressPROG/CHAN ontheHandsettoenterprogrammingmode.

• Press or untilthescreendisplaysDIALMODE:andthecurrentlyselectedmode.

• PressSELECT.Thecurrentsettingblinks.

• Press toselect TONE or PULSE.

• Press SELECT,tosavethedisplayedmode.

7 Set Time and Date

Ifyousubscribe toCallerIDservice, thedateandtimewillbesetautomaticallywiththe

firstincomingcall.

Ifyoudo not have Caller IDservice,youcan set the date andtimemanually.

• PressPROG/CHANuntilDATE/TIME isdisplayed.Press SELECT.

• Themonthisflashing.Press or untilthescreendisplaysthecorrectmonth.

PressSELECT.

• The day is flashing. Press or until the screen displays the correct day.

PressSELECT.

• The hour is flashing. Press or until the screen displays the correct hour.

PressSELECT.

• Theminuteisflashing. Press or untilthescreendisplays the correctminute.

PressSELECT.

•AM or PM is flashing. Press or to choose between AM or PM.

PressSELECT.

NOTE:You can choose to set the time manually, or you can allow it to be automatically

with incoming Caller ID information.

INSTALLATION

GETTINGSTARTED

Wall Installation on a standard modular Wall Plate

A bracket is available for wall mounting your Base Unit. To receive a bracket, call

1-800-595-9511. InCanada,call1-800-267-7377.

1Run the power and telephone line cords through the slots in the bracket,

connectingthemtothejackslocated on the underside of the Base.

2Connect the T-shaped bracket to the slots on the underside of the Base, as

showninthe illustration.

3MounttheBaseUnit onto thewallplate.

4Follow Steps 4through7in Table/Desk Installation.

a) Alignholesonbracketwith

mountingstudson wallplate.

b) Slidebracketdownonstuds

untilitlocksintoplace.

INSTALLATION

BASICOPERATION

TELEPHONE OPERATION

Answer a Call

Press any key

except OFF.

HOLD

Press to put a call

on hold; press

again to release

hold, OR picking

up an extension

phone will release

hold and return

the Handset to the

idle (on hook)

mode.

Make a Call

Press PHONE

then dial the

number, OR Dial

the number (use

to backspace

and correct digits),

then press

PHONE to call.

Flash/Call Waiting

Access special

telephone company

subscriber services.

Handset Volume

While on a call,

adjust the volume

of what you hear.

Exit

programming

End a Call

Press OFF or

place Handset

in Base.

Cancel a page

Redial/Pause

Press PHONE, then press

REDIAL/PAUSE to call last

number dialed (up to 32 digits).

-OR-

Press REDIAL/PAUSE, then

press PHONE to call last

number dialed.

Press REDIAL/PAUSE twice

to delete the last number

dialed record with Handset idle.

Program/Channel

Switch to a clearer

channel while on a call.

Enter programming mode

with Handset idle (on

hook).

BASICOPERATION

TELEPHONE OPERATION

BASICOPERATION

Handset Ringer Style/Battery Save

Youcanselect from four differentHandsetringer styles, or turntheringer off and

extendthebatterylife.

1Makesure the Handset is off.

2PressPROG/CHANtoenterprogrammingmode.

3Press or until the screen displays RINGER: and the current setting.

4Press SELECT. Thecurrent settingblinks,andyouwill hear a sampleofthering.

5Press or to select RINGER:1, 2, 3, 4, or OFF.

6Press SELECTtochoosethedisplayedringersetting.

Temporary Tone Dialing

Ifyouhavedialpulse(rotary)service,youcan changefromdialpulsetotouchtonedialing

during acall by pressing *TONE .This isusefulifyouneedtosend touchtonesignalsfor

accesstotelephonebanking or long-distance services.

1Dialthenumber.

2 Press *TONE.Buttonspressedafterthissendtouchtone signals.

3 Afteryouhangup, the phone automatically returns to dialpulse(rotary)service.

Headset Jack

You can use this telephone hands-free when you install any VTech 2.5mm headset,

purchased separately.

Plug the headset into the jack located on the right side of the Handset (under the small

rubberflap).Do not force the connection,butmakesure the plug fits securely.

TELEPHONE OPERATION

BASICOPERATION

Operating Range

This cordless telephone operates within the maximum power allowed by the Federal

CommunicationsCommission(FCC). Evenso,thisHandset andBasecancommunicate

overonlyacertaindistance—whichcanvary withthelocationsoftheBaseandHandset,

theweather,andthe construction of your home or office.

If you receive a call while you are out of range, the Handset might not ring — or if it

does ring,the callmightnot connectwhen youpress PHONE.MoveclosertotheBase,

thenpressPHONEtoanswerthecall.

If you move out of range during a phone conversation, you might hear noise or

interference.Toimprovereception,movecloser to the Base.

If you move out of range without pressing OFF, your phone will be left“offthehook.”

To hangup properly,walk back intorange, periodicallypressing OFF .

Display Screen Messages

TELEPHONE OPERATION

The Handset is in use

The Base is paging the Handset.

The Battery Pack needs to be recharged

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels V-tech Téléphone sans fil

V-tech

V-tech CS1550 Manuel utilisateur

V-tech

V-tech mi6890 Guide de configuration

V-tech

V-tech 9151 - VT Cordless Phone Manuel utilisateur

V-tech

V-tech CS6124 Manuel utilisateur

V-tech

V-tech t2450 Manuel utilisateur

V-tech

V-tech Cordless Phone with Digital Answering System and Caller... Manuel utilisateur

V-tech

V-tech CS6419-2 Manuel utilisateur

V-tech

V-tech vt9110 Manuel utilisateur

V-tech

V-tech DS6511 Manuel utilisateur

V-tech

V-tech DS3111-2 - DECT 6.0 Cordless Phone Manuel utilisateur

V-tech

V-tech Bell Manuel utilisateur

V-tech

V-tech PHONES PACKAGE I6720 Manuel utilisateur

V-tech

V-tech gz5838 Manuel utilisateur

V-tech

V-tech DECT CS6429-2 Manuel utilisateur

V-tech

V-tech VT1923 Manuel utilisateur

V-tech

V-tech Three Handset Connect to CELL™ Answering System with Caller... Manuel utilisateur

V-tech

V-tech DS4121-3 Manuel utilisateur

V-tech

V-tech CS6719-27 Manuel utilisateur

V-tech

V-tech IA5854 Guide de l'utilisateur

V-tech

V-tech DS6520-22 Manuel utilisateur

V-tech

V-tech SIP Contemporary Series Manuel utilisateur

V-tech

V-tech vt9121 Manuel utilisateur

V-tech

V-tech i6717 Manuel utilisateur

V-tech

V-tech IA5864 Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques

3Com

3Com NBX Manuel utilisateur

Panasonic

Panasonic KX-TGK210HK Manuel utilisateur

Panasonic

Panasonic KX-TCA181EX Manuel utilisateur

BT FREESTYLE 3200 Manuel utilisateur

AT&T

AT&T CL84102 Manuel utilisateur

BREZZICNI

BREZZICNI CL-3622 Manuel utilisateur

Panasonic

Panasonic KX-TG1831NZ Manuel utilisateur

Panasonic

Panasonic KX-TG7301E Manuel utilisateur

Furuno

Furuno FM-4721 Manuel utilisateur

Sanyo

Sanyo CLT-J70 Manuel utilisateur

Amplicomms

Amplicomms BigTel 201 Manuel utilisateur

GE 26992 Manuel utilisateur

AT&T

AT&T E1812B Manuel utilisateur

Sanyo

Sanyo CLT-670 Manuel utilisateur

GE 15432970 Manuel utilisateur

Curtis

Curtis TC595 Manuel utilisateur

Gigaset

Gigaset Gigaset 3000 Micro Manuel utilisateur

Poly

Poly VVX D230 Guide de configuration

V-tech t2416 Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques