V-Tec 2-WIRE Manuel utilisateur

ENGLISH

2-WIRE INTERCOM SYSTEM

USER MANUAL

DT-ENG-DT16D3AL-V1

TALK MENU MONITOR

Please read this manual carefully before using the product, and keep it well.

●Slots or openings in the back of the monitor, are provided for

ventilation and to ensure reliable operation of the video monitor

or equipment and to protect if from overheating. These openings

must not be blocked or covered. The monitor should never be

placed near or over a radiator or heat register and should not be

placed in a built-in installation such as a bookcase unless proper

ventilation is provided.

●All parts should be protected from violence vibration. And not

allow be impacting, knocking and dropping.

●For clean the LCD screen, using hands or wet cloth is forbidden.

●Please do the cleanness with soft cotton cloth, please do not use the

organic or chemical clean impregnate. If necessary, please use pure

water or dilute soap water to clean the dust.

●Image distortion may occur if the video door phone is mounted

too close to magnetic field e. g. Microwaves, TV, computer etc.

●Please keep away the video door monitor from wet, high

temperature, dust, and caustic and oxidation gas in order to avoid

any unpredictable damage.

●Do NOT open the device in any condition, call the administrator

for help if there is any problem or mulfunction happens.

Precautions

Contents



The model you purchased may not have all the functions mentioned here,

but the operation is similar.

1.Parts and Functions ........................................................................ 1

2.Monitor Mounting .......................................................................... 1

3. Basic Door Release Operation ...................................................... 2

4.Intercom Function .......................................................................... 2

5.Basic Setup Instructions ................................................................. 3

5.1 How to Enter Main Menu Page .................................................. 3

5.2 Ring Tone Settings ...................................................................... 3

5.3 Date and Time Setting ................................................................. 4

5.4 Slave Address and Guard Unit .................................................... 4

5.5 Restore to Default ....................................................................... 4

5.6 Unlock Parameter Setting ........................................................... 5

6.Screen and Volume Adjustment ..................................................... 6

7. Specications ................................................................................ 6

1.Parts and Functions

2.Monitor Mounting

Microphone

LCD Screen

LED Indicator

CALL Button

MONITOR Button

Direction Button

UNLOCK Button

TALK Button

MENU Button

Speaker

Mounting Hook

Connection Port

Extend Port

DIP Switches

1 2 3 4 5 6

TALK MENU MONITOR

1. Use the screws to fix the Mounting Bracket on the mounting box.(fitting accesories

includes a Bracket (Two pieces of 4X25 screws are needed for fastening the Mounting

Bracket), Special 2 wire cables to connect with Monitor)

2. Wire the system correctly(see the later connection chapter) then hang the Monitor on

the Mounting Bracket firmly.

145~160 cm

3. Basic Door Release Operation

4.Intercom Function

1. Press CALL button on outdoor station, the

Monitor rings, at the same time, the screen

displays the visitor image.

2. Press TALK Button on monitor, you can

communicate hands free with the visitor for 90

seconds.After finishing communication,press

"TALK" button again to end the communication. If

nobody answers the phone, the screen will be

turned off automatically after 40 seconds.

3. During talking state, Press UNLOCK Button to open the door for the visitor.

4. When the monitor is in standby mode, press MONITOR Button(or select item on

main menu page), The screen will show the icon 1

4 , if multi door stations are installed.

press ▲ button to choose the first camera,the screen will display the image from the

first door camera.Similarly, Press button to choose the second one,Press ▼ button

to choose the third one, Press button to choose the fourth one. Press"MONITOR"

button again to end monitoring.

When the monitor is in standby mode, press CALL

Button to enter Intercom Function page(or select

item on main menu page). Use ▲ / ▼ Button to

move upward / downward to select the item you want,

press MENU Button to enter.

Intercom Function

Intercom Call

Inner Call

Direct Dial Guard Unit

Exit

- Name List -

[01] Mr A

[02] Mr B

[03] Mr C

[04] Mr D

[05] Mr E

1. Intercom Call: User in one apartment can call

other apartments in the system. the namelist will

be created automatically by the system. Selete a

name on the screen then press CALL Button to

call.(Note:1. Press "CALL" button again to redial.

2. Press "TALK" button to cancel the call. 3.The

DIP switches code of the monitors are not the

same.)

5.Basic Setup Instructions

5.1 How to Enter Main Menu Page

5.2 Ring Tone Settings

1. Press MENU Button in standby mode, the date/time page will be showed. (the

date/time page will be closed in 3 munite if no operation)

2. Press MENU Button again, main menu page will be showed.

Select

setup

item on main menu page to enter setup page.There are 12 pieces ring tones

can be selected.use / Button to select last/next ring tone,it will perform

immediatelly.

Outdoor Tone

:set the ring tone calling from outdoor

station.

Intercom Tone

:set the ring tone calling from other

apartments.

Outdoor Tone -- 01

Intercom Tone -- 05

Monitor Time -- 1min

Advanced Set...

Auto Record -- OFF

Exit

2. Inner Call: If multi Monitors are installed in the same apartment, select Inner Call,

all the other Monitors will ring at the same time, whichever Monitor answers the call,

conversation is started.and the other monitors will stop ringing at the same time.(note:the

DIP switches setting of all monitors must be same. )

3. Direct Dial Guard unit: A Monitor can be assigned as Guard Unit Monitor; when the

Guard Unit Monitor answers the call, conversation with the guard person is started..

5.3 Date and Time Setting

5.4 Slave Address and Guard Unit

5.5 Restore to Default

1. Select

setup

item on main menu page to enter setup

page,then use ▲ / ▼ button to select

Advanced set...

item. A password will be asked before enter next sub

menu.the password is 2008, use ▲ / ▼ Button to

increase / decrease the value; use / Button to

select last/next digital. After inputing,press MENU

Button to confirm and enter the sub menu page.

2. Select

Date and Time Set...

item. Input date and

time by pressing the ▲ / ▼ Button to increase /

decrease the value and / Button to select last/

next digital,After finishing,press MENU Button to

confirm.

Time

Date

2010 03 31

1 0 3 2

Slave Addr Set -- 0

Guard Unit Set -- 0

Date/Time Set...

Other Settings...

Information...

Exit

According to 5.3 , select

Information...

item, this item

will show the

hardware/software

version and voltage

information of the Monitor. Select

Restore to default

item

,then press MENU button. All settings will be restored

to default.(Note that the restore to default operation will

not change the time setting and the datas.)

Hardware ver 0302

Software ver 0168

Voltage 22.4V

Manufacture 00.0T

Restore to default

Exit

1. According to 5.3. The

Slave Addr Set

item is for the master and slave user code

setting, it is set by installer.

Guard Unit Set:

if the item is set to 1, the Monitor is assigned as a Guard Unit

Monitor, for normal users, it should be set to 0.

5.6 Unlock Parameter Setting

Note:

1.When the

Unlock Menu

is set to 1, you can only release one lock.

2.When the

Unlock Menu

is set to 0, you can release two locks.at this mode,press UNLOCK

button,two unlock icons will be showed. Use ▲ / ▼ button to select the item you want, and

press UNLOCK or MENU button to release the corresponding door.

3.The restore to default operation will not change the

Unlock Menu

setting.

monitor

intercom

setup

exit

Outdoor Tone -- 01

Intercom Tone -- 05

Monitor Time -- 1min

Advanced Set...

Auto Record -- OFF

Exit

* * *

Password:

Slave Addr Set -- 0

Guard Unit Set -- 0

Date/Time Set...

Other Settings...

Information...

Exit

Hardware ver 0302

Software ver 0168

Voltage 22.4V

Manufacture 00.0T

Restore to default

Exit

Unlock Time 3

Unlock Mode 0

Unlock Menu 1

Exit

1.Press

setup

item on main

menu page.

2.Select Advanced Set...item and

press MENU button to enter,a

password will be asked.

4.Select Information...item and

press MENU button.

5.Press UNLOCK button and

hold for 2s.

6.Use ▲ / ▼ button to select the

item, use / Button to decrease /

increase the value of the item.settings

will be performed immediatelly.select

Exit item to exit.

3.The default password is 2008.

After finishing,press MENU

button to enter next sub menu.

7. Specications

●

●Power●supply●for●indoor●monitor:●● ● DC●24V●

●

●Power●consumption:● ●● Standby●2W;●Working●status●5W

●

●Monitor●screen:● ● 3.5●Inch●color●LCD

●

●Display●Resolutions:● ● 320(R,●G,●B)●x●240●pixels

●

●Video●signal:● ● 1Vp-p,●75Ω,●CCIR●standard

●

●Wiring:● ● 2●wires,●nonpolarity

●

●Monitor●time:● ● 40●seconds

●

●Talking●time:● ● 90●seconds

●

●Dimensions:● ● 220(H)×105(W)×20(D)mm

6.Screen and Volume Adjustment

During monitoring or talking, press MENU Button,the

ADJUST MENU

will be displayed.

Use ▲ / ▼ Button to select the adjustment item; use / Button to decrease / increase

the value.

ＲＧＢ

５

４

２

６

scene

user

Brightness

Colour

Ring Volume

Talk Volume

1. The first item is Scene mode selection: Total 4

screen modes can be selected in sequence:

Normal,

User, Soft

and

Bright.

Whenever you modify

Brightness

colour, Scene

item will be set to

User

mode automatically.

2. The

Brightness

and

Colour

item is for the image

quality setting, adjust the value to get the best image

you like.

3. The

Ring Volume

and

Talk Volume

items are ring tone and talking volume adjustment.

4. Note that all the modifications will be done immediately after the operation. Press

"MENU" button to quit the adjust page.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels V-Tec Système d'interphone

V-Tec

V-Tec DT-DJ4A Manuel utilisateur

V-Tec

V-Tec 27SDTD7-V1 Manuel utilisateur

V-Tec

V-Tec 37TD7-V1 Manuel utilisateur

V-Tec

V-Tec DMR18S Manuel utilisateur

V-Tec

V-Tec DJ4A Manuel utilisateur

V-Tec

V-Tec DT37MG Manuel utilisateur

V-Tec

V-Tec Livila VT27 Manuel utilisateur

V-Tec

V-Tec DMR11 Series Manuel utilisateur

V-Tec

V-Tec 2Easy DMR18s Manuel utilisateur

V-Tec

V-Tec DT31M Manuel utilisateur

V-Tec

V-Tec DMR11 Manuel utilisateur

V-Tec

V-Tec DT596/KP Manuel utilisateur

V-Tec

V-Tec DT591 Manuel utilisateur

V-Tec

V-Tec VIDEO DOOR PHONE SYSTEM Manuel utilisateur

V-Tec

V-Tec 27TD7-V1 Manuel utilisateur

V-Tec

V-Tec DT-DJ4S Manuel utilisateur

V-Tec

V-Tec DT24 Series Manuel utilisateur

V-Tec

V-Tec DT591 Manuel utilisateur

V-Tec

V-Tec DT16D3 Manuel utilisateur

V-Tec

V-Tec AT27TD7 Manuel utilisateur

V-Tec

V-Tec DT-DJ5A Manuel utilisateur

V-Tec

V-Tec C5-AT25/D4 Manuel utilisateur

V-Tec

V-Tec AT16/C5 Manuel utilisateur

V-Tec

V-Tec DJ4A Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur