UTRAI Jstar One Manuel utilisateur
成品尺寸：90mm*120mm
封面157g铜版纸
内页128g铜版纸
四色-骑马钉
JSTARONE 1.0 1908
PJSTAR-V1.0
Jump Starter Jstar One
USER MANUAL
USER MANUAL
Guide de démarrage rapide
Deutsche Anleitung
Guida di Operazione Rapida
取り扱い説明書
01
11
22
33
44
..........................................
.........................
.....................................
.......................
............................................
— 01 —
Packing List
Smart Clamps
English
Type-C To
Type-C Cable
DC Cigarette
Lighter Adapter
Carrying Case
Jump Starter
USB To
Type-C Cable
User Manual
— 02 —
Layout
1
13
14
10
11
9
12
5
6
4
3
7
2
8
— 03 —
Function
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Power Button
Power Level
Indicator Lights
Type-C Input /
Output Port
LED Flashlight
Situation
Normal, SOS, Strobe, and Off
EC5 Output Port Insert the plug into the jump starting port
Compass Direction
ON / OFF Button Turn ON / Turn OFF the jump starter
LED Indicator Show the work status of the battery clamp
Battery Clamps Plug Insert the plug completely into the jump starter
Red Battery Clamp Connect to positive terminal of the car battery
Black Battery Clamp Connect to negative terminal of the car battery
Charge your devices or charge the starter
• Press the button to show the remaining capacity.
• Long press the button to turn on / off the flashlight.
• When the flashlight turn on, press the button to
change the flashlight.
Showing the charging progress:
25%, 50%, 75%, 100%
USB Output Port 1
Charge your phone, tablet, camera, etc.
75% faster than a standard charge
USB Output Port 2
Charge your phone, tablet, camera, etc.
75% faster than a standard charge
DC 12V/8A
Output Port
Charge your devices
— 04 —
Specifications
Operation Guide
Battery Capacity
Battery Cycle Life
Peak Current
Starting Current
Car Jump Start Output
DC Output
Type-C Input
Type-C Output
USB1 Output
USB2 Output
Gas Engine Rating
Diesel Engine Rating
Operating Temperature
LED Light Power
Charging Time
Unite Size (L * W * H)
Indicator Lights
Battery Capacity
4 Solid
100%
22000mAh
≥300 times
2000A
1000A
12V
12V/8A
PD 5V/2A, 9V/2A
PD 5V/3A, 9V/2A, 12V/1.5A
5V/3A, 9V/2A, 12V/1.5A
5V/3A, 9V/2A, 12V/1.5A
Up to 8.0L
Up to 6.5L
-20℃~+75℃
White: 1W
Type-C Input: 4h-4.5h
170mm * 87mm * 47mm
3 Solid
75%
2 Solid
50%
1 Solid
25%
Power Level Indicator Lights
Press the Power Button to check the battery power level of the Jump Starter.
The number of solid lights indicates the battery level.
— 05 —
Charging your Jump Starter
• At Home :
1. Plug the USB cable into computer or any USB 2A wall adaptor (not included).
2. Connect the Type-C port into the Jump Starter.
• In Car :
1. Plug the car adaptor (not included) into the socket.
2. Connect the Type-C port into the Jump Starter.
NOTE: It is recommended to recharge the Jump Starter every 3-4 months to
maintain the efficiency and prolong the service life of the internal battery even if
the unit has not been used.
Charging your Smart Phones or any other Devices
Your Jump Starter comes with two USB charging ports and one Type-C charging
ports located at the front of the unit:
• Plug the USB cable or Type-C cable into the USB output ports or Type-C
output port on your Jump Starter.
• Connect it to your phone, tablet or other devices you want to charge. You can
charge 3 devices at the same time.
• Power on your Jump Starter to start charging!
— 06 —
Flashlight
1. Please press & hold Power Button for 3 seconds to turn on / off the flashlight.
2. In flashlight mode, press Power Button to select from 4 modes (normal,
strobe, SOS, off).
Jump Starting a Vehicle
By owning a Jump Starter, you have everything you need to jump start a vehicle
—no need to wait for help, Jstar One to the rescue!
We know you’re excited, but before jumping your vehicle, please be sure to take
some precautionary steps:
• Read your vehicle owner’s manual first as the manufacturer may have specific
steps and precautions that pertain to your vehicle.
• Be sure to turn off all electronics in your car (radio, lights, etc.) before jump
starting.
• Make sure you are in a dry, well-ventilated area. Never jump start a vehicle in
an enclosed area.
• Remove any moisture from your Jstar One unit, accessories, and your vehicle’s
battery. Never attempt to jump start a vehicle when moisture is present.
• Check that the vehicle’s battery terminals are clean to ensure the best
conductivity.
• Properly identify the vehicle battery’s positive (+, red) and negative (-, black)
terminals before connecting the clamps.
• When using the clamps, do not allow the metal teeth of the black clamp to
touch the metal teeth of the red clamp.
Table des matières
Langues :
Autres manuels UTRAI Démarreur à distance
