Utel TIU-200A Manuel utilisateur
TIU - 200A
Before operating the system,
please read this manual thoroughly
and keep it for future reference.
2.4GHz
2.4GHz WIRELESS TRANSMITTER
& WIRELESS RECEIVER
N6YUT-2006
UTEL CO.,LTD
TIU-200A
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Caution: Any changes or modifications in
construction of this device which are not
expressly approved by the party responsible
for compliance could void the users
authority to operate the equipment.
CONTENTS
1. SUB - ASSY'S IN THIS UNIT - - - - - - - - - - - - - - - - - - - - - 1
2. CONTROLS AND FUNCTIONS - - - - - - - - - - - - - - - - - - - - - - - 2
3. INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
3-1. INSTALLATION OF WIRELESS TRANSMITTER - - - - - - - - - - - - 6
3-2. INSTALLATION OF WIRELESS RECEIVER - - - - - - - - - - - - - - 14
4. MULTIPLE CHANNEL OPERATION - - - - - - - - - - - - - - - - - - - - 19
5. TROUBLESHOOTING - - - - - - - - - - - - - - - - - - - - - - - - - 23
6. SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - 24
SUB - ASSY'S IN THIS UNIT
Standard package TIU-200A
1- Transmitter
1- UL Approved AC adaptor
1- RCA A/V cable
1- User's manual
RIU-100AN / 100AP
1- Receiver
1- UL approved AC adaptor
1- RCA A/V cable
1- RF cable
Optional Items Extra wireless transmitter
(Not included) Extra wireless receiver
CCD Video Camera
Extra RCA A/V cable
Extra RF cable
Warranty registration card
CHECK LIST PRIOR TO USE
CHECK THESE INSTRUCTIONS BELOW BEFORE OPERATING THIS UNIT.
1. Keep distance at least 10 feet between the transmitter and receiver when you
install it because high frequency radio waves of 2.4GHz may cause an interfering
problem between channels, which is the reason of the distorted picture on the monitor.
2. Turn and adjust the antenna of the transmitter and receiver in order to optimize
the picture condition. Be aware that maximum scope of turning the antenna is 90°
towards right and left. Therefore, Do not turn it over 90°to prevent breakage.
3. Be sure to adjust the adaptor correctly to the exact power (120V or 220V you are
using) before installation.
FOR EFFICIENT USE
1. External radio waves may cause an interfering problem and geographical features
may affect the communication distance.
2. Keep in mind the usage of instructions for effective maintenance of your camera.
CONTROLS AND FUNCTIONS
WIRELESS TRANSMITTER
FRONT VIEW REAR VIEW
1
2 3 4 5 6 7
1. 2.4GHz A/V ANTENNA
The high gain directional dipole antenna sends the A/V modulated RF signal to the
receiver.
2. POWER SWITCH
Controls power on/off. Be sure to set the switch to "OFF" before plugging the
AC adaptor into the unit and AC outlet.
3. CHANNEL SELECTOR
Push button switch for channel selection
4. LED CHANNEL INDICATORS
Indicators of selected channel
5. VIDEO INPUT JACK (Yellow)
RCA jack for video input source connection
6. AUDIO INPUT JACKS (Left : White, Right : Red)
RCA L/R jacks for Audio input source connection
7. DC IN JACK
Connect the supplied 12V 500mA AC adaptor
CONTROLS AND FUNCTIONS
WIRELESS RECEIVER
FRONT VIEW REAR VIEW
2 3 4 5 6 7 8 9
1. 2.4GHz A/V ANTENNA
The high gain directional dipole antenna receives the RF signal.
2. POWER SWITCH
Controls power on/off. Be sure to set the switch to "OFF" before plugging the
AC adaptor into the unit and AC outlet.
3. CHANNEL SELECTOR
Push button switch for channel selection
4. LED CHANNEL INDICATORS
Indicators of selected channel
1
5. VIDEO OUTPUT JACK (Yellow)
RCA jack for video output
6. AUDIO OUTPUT JACK (Left : White, Right: Red)
RCA L/R jacks for Audio output
7. RF CHANNEL SELECTOR
Channel 3,4 selector to operate with TV(NTSC Standard)
8. RF OUTPUT CONNECTOR
Connector for TV connection
9. DC IN JACK
Power supply for 12V 500mA AC adaptor
INSTALLATION
WIRELESS TRANSMITTER
DC 12V 500mA
AC ADAPTOR
Transmitting From
1. Place the wireless transmitter on or near the A/V source unit.
2. Connect the 500mA AC adaptor to the DC IN jack on the receiver and plug it
into the 120V AC outlet.
WIRELESS RECEIVER
DC 12V 500mA
AC ADAPTOR
.Satellite Receiver .Camcorde
r
.Cable TV .Surveillance Camera
.VCR .Computer
.Laser Disc Player (convertible card required)
.Wireless Cable .A/V Receiver
.Digital Video Disc .CD Player
Connects to
·TV
·Monitor
·Computer (convertible card required )
·Speakers
1. Place the wireless receiver on or near the TV, monitor or other A/V unit.
2. Connect the 500mA AC adaptor to the DC IN jack on the receiver and plug it
into the 120V AC outlet.
INSTALLATION
ADJUSTING ANTENNA OF UNIT
RF ANTENNA
WARNING!
Please do not turn the antenna towards
the same way more than 90 degrees.
TRANSMITTER
IMPORTANT NOTE FOR CHANNEL SELECTION
Search the CH 1-CH 4 and select the best one for optimum reception in
your area. Both transmitter and receiver must be set to the same channel.
INSTALLATION OF WIRELESS TRANSMITTER
THE MAXIMUM RANGE IS 300 FT WITHOUT LOSS OF ANY PICTURE / SOUND QUALITY
12V 500mA
AC Adaptor TRANSMITTER
RCA cable(Optional)
Rear OF VCR
Rear of TV RF Cable
Note: Be sure to set the power on the transmitter to "OFF" before following steps
below.
1. Connect one end (triple plugs) of the RCA cable to the A/V jacks on the transmitter,
and the other end to the Audio/Video Out jacks on your VCR.
Be sure to match the color of the plugs in both connection.
If your VCR has only one audio out jack (mono sound), connect the white
plug(Audio-L) to your VCR.
2. If you want to use the system with a nearby TV, connect one end of the supplied
RF cable to the VHF Out jack on your VCR, and the other end to the antenna In
jack on your TV.
3. To receive cable transmission on your TV without the cable converting box, connect
the cable TV input source to the VHF In jack on your VCR.
4. Turn on the transmitter and search the channel 1-4 by pressing the Channel selector,
and then select the best one for optimum reception in your area.
5. Adjust the antenna direction as necessary.
INSTALLATION OF WIRELESS TRANSMITTER
12V 500mA
AC Adaptor TRANSMITTER
RCA cable
Rear OF the Cable Converting Box
Rear of TV RF Cable
Note: Be sure to set the power on the transmitter to "OFF" before proceeding as
follows.
1. Connect one end of the RCA cable to the A/V jacks on the transmitter, and the
other end to the A/V Out jacks on your cable converting box.
Be sure to match the color of the plugs in both connection.
If your cable converting box has only one audio OUT jack, connect the white plug
to your cable converting box.
2. For viewing cable signals through the nearby TV, connect the RF cable to the
Antenna Out jack on your converting box and the Antenna In jack on your TV.
3. Turn on the transmitter and search the channel 1-4 by pressing the Channel Selector,
and select the best one for optimum reception in your area.
Note: Both transmitter and Receiver units must be set to the same channel.
4. Adjust the antenna direction as necessary.
INSTALLATION OF WIRELESS TRANSMITTER
12V 500mA
AC Adaptor TRANSMITTER
RCA cable
Rear of the Satellite Receiver
Rear of the TV RF Cable (or Laser Disc Player)
Note: Be sure to set the Power Switch on the transmitter to "OFF" before following
steps below.
1. Connect one end of the RCA cable to the A/V jacks on the transmitter, and the other
end to the Audio/Video Out jacks on your satellite receiver or laser disc player.
Be sure to match the color of the plugs in both connection.
2. Connect the RF cable to the Antenna Out jack on the satellite receiver (or laser disc
player) and the Antenna In jack on your TV.
3. Turn on the transmitter and search the channel 1-4 by pressing the Channel Selector,
and select the best one for optimum reception in your area.
Note: Both transmitter and receiver units must be set to the same channel.
4. Adjust the antenna direction as necessary.
INSTALLATION OF WIRELESS TRANSMITTER
Table des matières
