US SAWS Surface Preparation ◆ 877-817-6687 ◆ 11 High Street, Sueld, CT 06078 ◆ www.ussaws.com
Warranty
This document is not to be used as a guide in determining policies and procedures for US Saws and Blades Incorporated (USSB Inc) products.
It is to be used in determining wether a warranty is justied and as a procedural guide in completing a USSB Inc warranty claim form.
Warranty Responsibility
The distributor or the end user must prepare a Machine Warranty Information Card when the machine is delivered. Failure to comply will make
any and all warranties on this equipment null and void. Credit for warranty repairs will be given only after receipt of the WARRANTY CLAIM
FORM, properly completed with all the required details. Submittal details are described later in this document.
Warranty Policy
1. USSB Inc. warrants it’s products against defects in material and workmanship under normal and proper use for a period of 90 days from
the date of delivery; in the case of Rental Fleet Machines.=, date of assignment to Rental Fleet. Such warranty is extended only to the
buyer who purchases the equipment directly from USSB Inc or it’s authorized distributor. This warranty does not include expendable parts,
such as, but not limited to, plugs, cutters, blades, blast wheel, wear parts, liners, and seals.
2. The obligation under this warranty is strictly limited to the replacement or repair, at USSB Inc’s opinion, of machines and does not include
the cost of transportation, loss of operating time, or normal maintenance services.
3. This warranty does not apply to failure occurring as a result of abuse, misuse, negligence, corrosion, erosion, normal wear and tear,
alterations or modications made to the machine without express written consent of USSB Inc.
4. Warranty request must be submitted in writing within 30 days after failure.
5. Written authorization to return merchandise under warranty must rst be obtain from USSB Inc.
6. USSB Inc reserves the right to inspect and make the nal decision on any merchandise returned under warranty.
7. USSB Inc oers no warranty with respect to accessories , including, but not limited to, engines, motors, batteries, tires, and any other
parts not manufactured by us but which the original manufacturer warrants.
8. USSB Inc reserves the right to make product changes or improvements without prior notice and without imposing any obligation upon
itself to install the same on its products previously sold.
9. The above warranty conditions can only be altered by USSB Inc. USSB Inc must conrm alterations in writing for each specic transaction.
10. USSB Inc reserves the right to establish specic warranty terms for use or demo machines on an individual transaction basis. Invoices
covering such merchandise will clearly state the provisions of the applicable warranty for each specic transactions.
11. WE DO NOT AUTHORIZE ANY PERSON, REPRESENTATIVE OR SERVICE OR SALES ORGANIZATION TO MAKE ANY OTHER WARRANTY OR TO
ASSUME FOR US ANY LIABILITY IN CONNECTION WITH THE SALE OF OUR PRODUCTS OTHER THAN THOSE CONTAINED HEREIN.
12. UNDER NO CIRCUMSTANCES SHALL USSB INC BE LIABLE TO CUSTOMER OR ANY OTHER PERSON FOR ANY DIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF ANY WARRANTY OR
FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER, INCLUDING WITHOUT LIMITATIONS, DAMAGES FOR ANY LOSS OF
GOODWILL, WORK STOPPAGE, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES.
13. USSB INC WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, WHICH WARRANTIES ARE EXCLUDED.
1
Blastrac • 800-256-3440 • fax 800-547-5838 • blastrac.com
CONCRETE GRINDERS
7" GRINDER-VAC PARTS
05-W2280: 7" Metabo grinder
05-W23230: 9" Metabo grinder
05-65800: 7" full shroud
05-65803: 7" convertible shroud
05-60013: ¼"-20 x ½" Phillips
flat head screw (4)
05-71100: Blade nut "C"
7" cup wheel (not included)
05-50500: Arbor nut "B"
05-75811: Housing flanged support
05-60028: Shroud hardware kit
(items in bold)
05-75820: Spacer washer
05-80620: Adapter - Metabo "AA"
05-50250: ¼"-20 x
3
/
8
" socket set screw (3)
05-73902: M14 x 20 hex head bolt (2)
05-73904: M14 lock washer (2)
05-73900: Loop handle (with bolts and washers)
05-85209: Spanner wrench
05-81120: Zec blade nut "E"
05-81130: Zec blade nut "F"
7" Zec disk (not included)
05-77171: Decal “WARNING - CONCRETE SAW SAFETY”
Part numbers and descriptions are shown below for the 7" Grinder-Vac. Items shown in bold below are sold as part of the replacement shroud
hardware kit, part number 05-60028.
05-73400: 2¼" x 6' hose (not shown)
05-98087: Hex key
1
/
8
" (not shown)
7" Grinder-Vac Parts
Part numbers and descriptions shown for
7 in. Grinder-Vac
SX85209: Spanner Wrench
SX81120: Zec Blade Nut“E”
05-10700: 7” Zec Disk (Not Included)
SX81130: Zec Blade Nut“F”
SX80622: “AM CV” Adaptor Ring
SX71100-1: Blade Nut “C1”
TCB0724SD: 24 Segment Turbo
Cup Wheel (Not Included)
SX50500: Arbor Nut “B”
05-60013: 1/4”-20” x 1/2”
Phillips Flat Head Screw (4)
SX75811: Housing Flanged Support
SX73094: M14 Lock Washer (2)
SX7302: M14 x 20 Hex Head Bolt (2)
05-50250: 1/4”-20 x 3/8” Socket Screw (3)
SX75820: Spacer Washer
SX65800: 7” Full Shroud
SX65803: 7” Convertible Shroud
SX73400: 2 1/4” x 8’ Hose (Not Shown)
SX98087: Hex Key 1/8” (Not Shown)
SX73900: Loop Handle (With Bolts and Washers)
Decal “Warning - Concrete Saw Safety”
SXW24180: 7” Metabo Grinder
SXW24230: 9” Metabo Grinder
