US Robotics MAXg Manuel utilisateur

Wireless MAXg USB Adapter

Installation Guide

Guide d'installation

Installationsanleitung

Guida per l’installazione

Guía de instalación

Installatiegids

R24.0508.00

Table of Contents

English ........................................................................................................... 1

Français ........................................................................................................ 15

Deutsch ........................................................................................................29

Italiano .........................................................................................................43

Español ........................................................................................................57

Nederlands................................................................................................... 71

U.S. Robotics Wireless

MAX

g USB Adapter

Installation

Package Contents:

Prepare for installation

You must have administrator rights on your computer in order to install this product.

You will need to install this Installation CD-ROM on all the PCs on which you plan to install

Wireless MAXg USB Adapters.

You must be using Windows XP (Service Pack 1 or higher) or 2000 (Service Pack 4 or higher).

For the most updated information, visit: http://www.usr.com/support

You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed

information.

If you are installing only a Wireless MAXg USB Adapter, go to the

section entitled Installing JUST the Wireless MAXg USB Adapter.

Installing BOTH a Wireless MAXg Router and the

Wireless MAXg USB Adapter

Step One: Connect the Wireless

MAX

g Router

A. Turn off your computer and your cable or DSL modem.

Disconnect the modem’s Ethernet cable from your com-

puter and connect it to the WAN port of the Wireless

MAXg Router.

B. Connect the supplied Ethernet cable to the Network Interface Card of your computer and to

one of the LAN ports of the Wireless MAXg Router.

C. Connect the antenna to the Wireless MAXg Router.

D. Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-

let. Turn on your computer.

USR5421 Wireless MAXg USB Adapter Installation CD-ROM which includes User Guide

Quick Installation Guide

E. Turn on your cable or DSL modem.

Note to UK Users: Attach the correct power plug to the power adapter.

Note: You have finished connecting the Wireless MAXg Router and will now need to install

the Wireless MAXg USB Adapter.

Step Two: Install the Wireless

MAX

g USB Adapter

A. Insert the USB Adapter Installation CD-ROM into the CD-ROM drive of the computer you are

installing the USB Adapter in. The Installation CD Graphical User Interface (GUI) will appear

on your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and

click OK.

B. Click Installation.

C. Follow the on-screen instructions.

D. When prompted, locate an available USB port and

fully insert the Wireless MAXg USB Adapter.

Windows XP users should follow any on-screen

instructions.

E. When prompted, click Restart to restart your computer.

Note: You may see a screen which says “Digital Signature Not Found” or “Windows Logo

testing”. Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in

conjunction with the supported hardware and has verified compatibility with Windows XP

and 2000. Because U.S. Robotics wants its customers to take full advantage of the

network card’s functionality, it has made the drivers available.

Step Three: Set up a Wireless Network

A. When your computer restarts and you are prompted, select Configure a new U.S. Robotics

Wireless MAXg Router and click Next. You will need to wait while the Wireless MAXg USB

Adapter communicates with the router.

B. If prompted, select your Internet Connection type and click Next. Depending on the type of

Internet Connection that you choose, you may need to enter some additional information.

C. Enter a Network name and a Pass phrase (also known as network key) for your wireless

encryption and click Next. You will need to wait while the router and the USB Adapter are

configured.

Note: U.S. Robotics recommends that you enable WPA so that your wireless network is

secure. Make sure you assign the same secret WPA key to all your wireless devices to

ensure network connectivity. For more information about this and additional wireless

parameters, refer to the User Guide on the U.S. Robotics Installation CD-ROM.

D. When prompted, enter a User name and Password for the router login and then click Next.

Wait while the configuration continues.

E. You will then see a screen that shows you the settings for your Wireless MAXg Router. These

settings will be saved to a text file on your computer desktop and you have the option to

print them out if your computer is connected to a printer. When you are done reviewing this

information, click Finish. Your Wireless MAXg Router and USB Adapter should all be config-

ured and ready for use.

Congratulations! You have finished installing your product. The Wireless

MAX

g USB Adapter

should now be connected to the network that you set up.

If you experience any problems connecting to a wireless networking device, refer to the

Troubleshooting section in this guide or to the Configuration section of the User Guide on the U.S.

Robotics Installation CD-ROM for more information.

Opening the Configuration Utility

You should now see a small icon for the Configuration Utility in the system tray by your clock on

your computer desktop. You can open the Configuration Utility in two ways:

• Right-click the icon and click Open Utility.

• Left-click once on the Utility icon to open the quick connect screen. In the quick connect

screen, you can select an available network and enter the Network key, if applicable. Click

Connect to establish a wireless connection. You can also click Advanced to open the full

Configuration Utility.

The Configuration Utility is used to change or verify the configuration information that relates to

your Wireless MAXg USB Adapter. The Configuration Utility icon will be colored to indicate the

status of your wireless network: red for disconnected and green for connected with good quality.

Installing JUST the Wireless MAXg USB Adapter

Step One: Install the Wireless

MAX

g USB Adapter and drivers

A. Insert the USB Adapter Installation CD-ROM into the CD-ROM drive of the computer you are

installing the USB Adapter in. The Installation CD Graphical User Interface (GUI) will appear

on your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and

click OK.

B. Click Installation.

C. Follow the on-screen instructions.

D. When prompted, locate an available USB slot and fully insert the Wireless MAXg USB

Adapter.

E. When prompted, click Restart to restart your computer.

Note: You may see a screen which says “Digital Signature Not Found” or “Windows

Logo testing”. Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this

driver in conjunction with the supported hardware and has verified compatibility with

Windows XP and 2000. Because U.S. Robotics wants its customers to take full

advantage of the network card’s functionality, it has made the drivers available.

Step Two: Connect to a Wireless Network

A. After your computer restarts and you are prompted, select Connect to an established wire-

less router and click Next. You will need to wait while the Wireless MAXg USB Adapter looks

for available wireless networks.

B. A list of available wireless networks will appear on the “Connect to Existing Router or Access

Point” screen.

C. Select the appropriate wireless network and click Next.

Note: If the device does not appear in the list, you can enter the name of the network

under Network name. One reason the device may not appear is if Broadcast Network

name is disabled in your wireless router or access point. You can also click Detect and

your Wireless MAXg USB Adapter will search the area again for available wireless

networking devices.

D. Configuration information for that network will appear. If the network specified is not secure,

the “Installation Complete” screen will appear. Click Finish. If you have specific security

settings enabled on the wireless network you will be connecting to, such as WEP or WPA2,

you will need to select your security type and click Next. Enter the appropriate security

information on the next screen and click Next.

E. Click Finish. If prompted when the setup is complete, restart your computer.

Congratulations! You have finished installing your product! The Wireless MAXg USB Adapter

should be connected to the wireless network that you selected.

If you experience any problems connecting to a wireless networking device, refer to the

Troubleshooting section in this guide or to the Configuration section of the User Guide on the U.S.

Robotics Installation CD-ROM for more information.

Autres manuels pour MAXg

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels US Robotics Adaptateur

US Robotics

US Robotics USR5420 Manuel utilisateur

US Robotics

US Robotics USR1120 Manuel utilisateur

US Robotics

US Robotics 5426 Manuel utilisateur

US Robotics

US Robotics 3CP3468 Manuel utilisateur

US Robotics

US Robotics 5425 Manuel utilisateur

US Robotics

US Robotics MAXg Manuel utilisateur

US Robotics

US Robotics USR997901 Manuel utilisateur

US Robotics

US Robotics MAXg Manuel utilisateur

US Robotics

US Robotics USR5420 Manuel utilisateur

US Robotics

US Robotics 5423 Manuel utilisateur

US Robotics

US Robotics USR1120 Manuel utilisateur

US Robotics

US Robotics USR5420 Manuel utilisateur

US Robotics

US Robotics 5412 Manuel utilisateur

US Robotics

US Robotics WN4501D Manuel utilisateur

US Robotics

US Robotics USR9620 Manuel utilisateur

US Robotics

US Robotics USR5422 Manuel utilisateur

US Robotics

US Robotics USR5446 Manuel utilisateur

US Robotics

US Robotics USR9620 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur