URC HCM-C1 Manuel utilisateur
Order Number : GETEC-C1-14-456 FCC Part 15 subpart C
Test Report Number : GETEC-E3-14-089 Page 1 / 1
EUT Type: Base Station
FCC ID.: OZ5URCHCMC1
APPENDIX H
: USER’S MANUAL
HCM-C1
Base Station
Owner’s Manual
Page ii
HCM-C1 Owner’s Manual
© 2014 Universal Remote Control, Inc. All rights reserved.
The information in this manual is copyright protected. No part of this manual may be
copied or reproduced in any form without prior written consent from Universal
Remote Control.
Universal Remote Control SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The
information in this manual is subject to change without prior notice.
The information in this manual may be subject to change without prior notice.
URC - Control the Experience is a registered trademark of Universal Remote
Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
Page iii
Introduction 1
URC HCM-C1 Base Station 2
URC HCM-R1 Remote Control 2
URC Android and iOS Mobile Application 3
Features and Benefits 4
Before Getting Started 5
Parts Guide 5
Controlling Other Network Devices (IP Control) 7
DC Power Input 7
Front Panel Description 8
Top Panel Description 9
Power LED 9
Ripple LED 11
Bottom Panel 12
WPS Button 13
Removable Mounting Plate 13
Network Installation 14
Base Station Programming 17
Specifications 17
Limited Warranty Statement 18
End User Agreement 22
Federal Communication Commission Interference Statement 23
Page 1
Introdu tion
The HCM-C1 Network Base Station controls your components by sending
commands over your home network and directly to your audio/video devices,
lighting, climate control and security systems.
By adding a HCM-R1 Wi-Fi remote control, a URC Mobile Android or iOS
Application, to your home automation system along with the HCM-C1 Base Station,
two-way control of your connected devices throughout the home or small office
space is provided. Controlling and monitoring your home’s devices is simple using
the HCM-R1 Remote Control, URC Mobile Application and the HCM-C1 Base
Station.
Expand Zones: Install up to eight HCM-C1 Base Stations in your home, for control
of up to eight different rooms or areas, all over the same local network used for
internet access.
Add a Mobile Phone or Tablet using the URC Mobile Application to control all
devices in your home, such as TVs, Cable and Satellite receivers, lighting,
thermostats and security systems, with the HCM-C1 Base Station.
The HCM-C1 Base Station is a network based product, and requires the use of a
previously installed, or custom local area network (LAN).
URC HCM-C1
Base Station
The URC HCM-C1 Base Station is a
central hub for network based control
of home accessories and your
entertainment system. Control up to
eight separate areas of the home by
adding more base stations (eight
maximum), and using the URC
HCM-R1 Remote Control, or the URC
Android or iOS Mobile Application for
control.
Page 2
URC HCM-R1
Remote Control
Control your home accessories such as
lighting, thermostats and security, and
your home audio and video devices using
the URC HCM-R1 Remote Control with an
HCM-C1 Base Station. The URC HCM-R1
Remote Control is a Wi-Fi based remote
control, and does not use “line of sight”
infrared or low frequency RF.
URC Android and iOS Mobile Appli ation
When used with the URC HCM-C1 Base Station, the URC Android and iOS Mobile
Application provides full control of your audio and video components, without the
need for a “point and shoot” infrared remote control. The URC Mobile Application
also provides advanced IP command and control of network based equipment.
Page 3
Features and Benefits
● Conne t with Wi-Fi or Wired Ethernet
Connect the HCM-C1 Base Station to a wired local Ethernet network, or connect
wirelessly to a local wireless Ethernet network. The Wi-Fi capability of the HCM-
C1 Base Station provides installation flexibility needed when installing the
HCM-C1.
● Two-way meta-data feedba k
Experience two-way feedback right on the HCM-R1 remote's screen when used
with compatible home devices like thermostats, lighting, or selection of IP
Cameras. Enjoy the same feedback when used in conjunction with an ever
expanding line of 3rd party products.
● Android and iOS ontrol
The addition of an HCM-C1 Base Station to a control system, allows for control
via URC’s Mobile iOS and Android app for iPads, iPhones, iPod touch, as well
as Android Phones and Tablets. Note: Requires the purchase of URC Mobile
Setup code.
● No Aiming
Using an HCM-C1 Base Station results in flawless control of your components
without having to aim the remote! The signal travels to the HCM-C1 Base
Station via Wi-Fi and is then converted back to infrared before being sent to the
device being controlled; perfect for hidden components.
Page 4
Before Getting Started
● Designed for use on your lo al wireless network
The HCM-C1 Base Station is designed for use on your local wired or wireless
network. By adding an HCM-R1 Remote Control, or the URC Mobile Application
on iOS and Android devices, the HCM-C1 Base Station can also control your
home’s audio/video devices.
● Programmable via a simple web page interfa e
Use the URC web based programming page to fully automate your home
entertainment, comfort and security system. Download and save the setup file
on the URC µCloud. All that is needed is basic knowledge of your devices, and
the settings of your local area network.
Parts Guide
What’s included in the HCM-C1 box:
● HCM-C1 Wi-Fi Base Station
● 12 Volt 1000 mA Power Supply
● Ethernet Network Cable
● Four Standard Infrared Emitters
● One Wall Mounting Plate with Four Mounting Screws
● Owner’s Manual
Page 5
Rear Panel Des riptions
Infrared Outputs
The rear panel of the HCM-C1 Base Station supplies four infrared emitter ports,
allowing for control of any audio/video device normally controlled by a simple “point
and shoot” infrared remote control.
Self-adhesive “flashers” (included) affix to the front panels of your television, blu-ray
player and other equipment. The flashers connect to the infrared output ports,
shown above.
Ethernet LAN Connection / Wi-Fi
A standard Ethernet LAN Connection port is provided, for a “hard-wired” connection
to a local network. The HCM-C1 also supports a wireless Ethernet (Wi-Fi)
connection to the same local network used for internet access.
Page 6
Table des matières
Autres manuels URC Accessoires
