Edit/Delete User Code
1.From the main display press .
2.Enter master code (Default code 1234)
3.Select [4] User Code and press
4.Select a user and press
5. Select [1] Edit Code.
6. Edit the user code or enter 0000
to delete
7. Press
Bypass / Unbypass a Zone
1. From the main display press .
2. Enter master code (Default code 1234)
3. On the Main menu, press [21]
4. Select a zone and press to
toggle
5. To save the status, press
SMS Control Commands
Controlling the System through SMS
SMS Structure: [Free text - Up to 43 characters][#][User Code][Command]
Example: DISARM#1234120
Optional Free Text User Code Command
D I S A R M # 1 2 3 4 1 2 0
Command Code Numbers:
120: Disarm
121: Full arm
122: Part arm
123: Perimeter arm
200: System arm status
030: PGM 1 off
031: PGM 2 off
130: PGM 1 on
131: PGM 2 on
Telephone Control Commands
1. Dial the cellular number of the premises and wait until the system answers and two tones
are heard.
2. Within 15 seconds, enter the Telecontrol Code (code 29). After a tone sounds, press:
3 : Full arm
6: Disarm
7: Extend the call
9: Cancel siren
2: 2 Way Audio
430 / 431: PGM on
530 / 531: PGM off
*#: Disconnect the line
