UNIWEIGH P2 Series Manuel utilisateur
USER MANUAL
UNIWEIGH
PROFESSIONAL DIGITAL SCALE
P2 series
2
Thanks for purchasing the UNIWEIGH Digital Pocket
Scale! This User Guide is designed to get you up and
running quickly with your scale. Scales are precision
instruments and require proper care and skill to get the
best results. If you have questions or need support,
please feel free to reach out our customer support:
User Guide
UNIWEIGH Digital
Pocket Scale
Two AAA
Batteries
What’s in the Box
Key Descriptions
- Turns the scale ON and OFF.
- Changes the weighing unit.
- Counts the quantity of small items.
ON/OFF
MODE
PCS
- Zero's the scale. Also subtracts the weight of an
empty container(see Tare Function).
TARE
ON/OFF MODE PCS TARE
ON/OFF
TARE
MODE
PCS
g
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
Weighing Your First Item
Things To Avoid
Unlevel Surfaces
Air Currents
Radio Frequency
Interference
Vibration
High Humidity
Extreme Temps
3
1.
Press the key to turn
the scale on.
2.
Place the item on the center
of the weighing platform.
3.
Take your reading from the
display. You can press the
key to convert between
weighing units.
4.
The scale’s auto-off function
will turn the scale off
after 3
minutes of inactivity or you can press the
key to
turn
the scale off.
ON/OFF
ON/OFF
MODE
ON/OFF
TARE
MODE
PCS
g
Tare Function
The Tare function allows you to subtract the weight of a
container so that the display only shows the weight of the
contents.
NOTE: Theweightof the container will subtract from
the available capacity and will leave a negative value
on the display once the weightis removed. Press
again to return the display to zero.
TARE
Auto-Off
4
Press the
key to subtract the
container’s weight.
Place an empty tray
or container on the
platform.
Add items to the
container to see their
weight on the display.
TARE
TARE
1. Turn off the scale
2.
Press and hold button, at same time press
button 5 times quickly, "60" will be displayed.
3.
Release the buttons, then press button to
switch among "0/60/120/180", if "0"is selected, the
auto/off function will be disable.
4.
After choosing the desired time, press button
to confirm this setting.
5. The display will show "PASS", then turn off
automatically.
ON/OFF
ON/OFF
MODE
MODE
ON/OFF
TARE
MODE
PCS
g
ON/OFF
TARE
MODE
PCS
g
5
Counting Function
1. Press the key to turn the scale on.
2.
Place a sample quantity of 25, 50, 75 or 100 pcs
of
the item you want to count on the platform.
3.
Press and hold the key to enter counting setup.
4.
Tap the key to select your sample qty and set
the average piece weight (APW）in memory, press
the key again, sampling is completed.
5.
Your may now place any quantity on the scaleand
view the piece count. ("PCS" will show on the display)
PCS
PCS
MODE
Accuracy
Your scale comes calibrated from the factory and
most users wont need to calibrate their scale for a
long time. You should check your scale’s accuracy
periodically using calibration weights and perform
calibration if necessary.
ON/OFF
6
ON/OFF
TARE
MODE
PCS
g
Calibration
Calibration adjustment is permanent and should only
be performed using accurate calibration weights that
match the requirements for your scale (see the chart
on back). Do not use coins or other household items
to calibrate.
1.
Prepare the required weight for your scale. (see
chart on back)
2. Find a flat and level surface to perform calibration
and let the scale adjust to room temperature.
3.
Press to turn the scale on and wait for the
scale to stabilize.
4.
Make sure nothing is on the platform, Long press
button the display will show "CAL", then
press the button again, the display will flash
the required weight.
5.
Place the required calibration weight on the center
of the platform.
6.
The display will show”PASS” then
return to normal weighing mode.
You may now turn the scale off or
continue weighing.
MODE
MODE
ON/OFF
7
Specifications
P2-200 P2-1000
Max Capacity
Readability
Weighing
Units g, oz, ozt, dwt, ct, gn
Dimensions Overall: 5.51 in x 3.4 in x 0.94 in
Platform: 3 in x 2.36 in
Display: 1.65 in x 0.8 in
Calibration
Weight 50g 500g
Power 2 x AAA Batteries (included)
Warranty 2 Year Limited Warranty
200.00 g / 7.054 oz /
6.43 ozt /128.60 dwt /
1000.00 ct / 3086.4 gn
0.01 g / 0.001 oz /
0.001 ozt / 0.01 dwt /
0.05 ct / 0.2 gn
1000 g / 35.27 oz /
32.15 ozt / 643 dwt /
5000.00 ct / 15432 gn
0.1 g / 0.01 oz /
0.01 ozt / 0.1 dwt /
0.5 ct / 2 gn
PROFESSIONELLE DIGITALE WAAGE
Bedienungsanleitung
Deutsch
8
Schlüssel Beschreibungen
Was ist in der Box?
- Schaltet die Waage EIN und AUS.
- Ändern der Gewichtseinheit.
- Setzt die Waage auf Null. Subtrahiert auch das
Gewicht eines leeren Behälters (siehe Tara-Funktion).
ON/OFF
MODE
TARE
Vielen Dank für den Kauf der UNIWEIGH Digitalen
Taschenwaage!
Dieses Benutzerhandbuch soll Ihnen helfen, Ihre Waage
schnell in Betrieb zu nehmen. Waagen sind
Präzisionsinstrumente und erfordern die richtige Pflege
und Kompetenz, um die besten Ergebnisse zu erzielen.
Wenn Sie Fragen haben oder Unterstützung benötigen,
wenden Sie sich bitte an unseren Kundendienst:
1. Benutzerhandbuch
2. Zwei AAA-Batterien
3. UNIWEIGH Digitale Taschenwaage
9
- Zählt die Menge kleiner Artikel.
PCS
ON/OFF MODE PCS TARE
Table des matières
Langues :
Autres manuels UNIWEIGH Échelle
