Universal Remote Control Osiris Manuel utilisateur

Owner’s

Manual

osiris

FAV

HBO

SHOW

MOVIE

ESPN

CNN

1 0F 8

MX350 Manual.qxd 8/13/2004 10:03 AM Page 1

The information in this manual is copyright protected. No part of this manual may be copied or reproduced

in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON-

TROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS-

SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior

notice. Osiris is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark of

Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of

their respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

Thank You!

Thank you for purchasing the Osiris Pre-Programmed and

Learning Remote Control. This manual is designed to assist you

step-by-step as you setup the Osiris to replace all of your

remote controls and automate your home entertainment system.

MX350 Manual.qxd 8/13/2004 10:03 AM Page 2

Table of Contents

Getting Started 2

Button Layout 3

Basic Setup 5

Pre-Programmed Method 5

Learning Method 9

Volume Control Punch Through 12

Advanced Operation 14

Advanced Setup 16

Editing Button Labels 16

Macro Button Setup 19

Favorite Channel Setup 21

Hiding and Adding Pages 23

Erasing 25

Cloning One Osiris to Another 26

Recalling Pre-Programmed Settings 27

Utilizing Optional RF Base Stations 28

IR/RF Signal Setting 31

ID # - Setting Base Station Address 33

EMITT - Setting IR Emitter Outputs 34

BLAST - Setting the Front Panel Blaster On or Off 35

Pre-Programmed Code Tables 37

Frequently Asked Questions 52

Warranty 53

Specifications 53

MX350 Manual.qxd 8/13/2004 10:03 AM Page 1

Getting Started

Congratulations!

You’ve purchased one of the most advanced and easy to setup control sys-

tems available. The Osiris’s built-in library includes thousands of different

brands and models of remote controls. In most systems, all you have to do

to setup the Osiris is enter which brands and models you own. If you own

a component too new to be in the library, the Osiris uses advanced learn-

ing technology to quickly set each Osiris button, one at at time. Setting up

your Osiris to replace all your existing remote controls can be done in a

few minutes. Basic Setup is described on pages 5 to 14.

The Osiris’s exciting advanced features automate and customize operation

in many ways. You could use Macro Setup to power on all of your compo-

nents and start the show with the press of one button! With the Osiris’s

unique Favorite Channel capability, you can tune in a channel with the

press of one button instead of entering the entire channel number. Any of

the button names on the display can be edited as you like. It is best to

delay any Advanced Setup (described on pages 15 to 29) until after you

finish Basic Setup.

Battery Installation

Remove the battery compartment cover by pressing up the cover lock.

Insert four AAA batteries into the battery compartment as shown in the

diagram.

The Osiris

MX350 Manual.qxd 8/13/2004 10:03 AM Page 2

MAIN

Button

takes you

to the

MAIN

Menu.

Screen

Labeled

Display

Buttons

LIGHT

Button

PAGE

Numbers

FUNCTION

Buttons

TITLE

FAVORITE

CHANNEL

Button

PAGE

Buttons

change the

page of

Display

Buttons.

Button Layout

MX-350

MAIN

CABLE

DVD

VCR

AUDIO

1 0F 2

MX350 Manual.qxd 8/13/2004 10:03 AM Page 3

The Osiris

Selecting a New DEVICE Changes

All Button Commands Instantly

The Osiris can operate ten different devices even though it is only one

remote control. Let’s try it now! Press the MAIN button, then press the TV

DEVICE button.

The top of the screen changes from MAIN to TV. Now all of the buttons

change their function to operate a TV. Press the page buttons. Watch the

labels of the display buttons change with each press. There are five pages

of display buttons already labeled for TV operation. To operate another of

your components (e.g., VCR, DVD etc.), press the MAIN button to return

to the MAIN menu. The MAIN menu displays five of your Devices on the

screen. Simply press one of the screen-labeled Device buttons to operate

another device. If you don’t see the device name you want, then use the

PAGE buttons to display the remaining five devices on page 2 of the

MAIN menu.

Light Button

Press the LIGHT button to backlight all the buttons. To turn off the back-

lighting, press the LIGHT button again, or just wait ten seconds (the back-

lighting automatically shuts itself off).

DEVICE

Button

MAIN

Button

MAIN

CABLE

DVD

VCR

AUDIO

1 0F 2

MAIN

CABLE

DVD

VCR

AUDIO

1 0F 2

LIGHT

Button

MX350 Manual.qxd 8/13/2004 10:03 AM Page 4

Basic Setup

You can start setting up your Osiris using either the Pre-Programmed

Method or the Learning Method. However, all the buttons of the Osiris are

setup at once with the Pre-Programmed Method, so it is usually faster than

the one-button-at-a-time Learning Method.

Pre-Programmed Method

Power on the A/V component you wish to setup, so that you can test

codes by sending power off commands.

Refer to the pre-programmed code tables on pages 33 - 47 and

write down the code numbers listed for your A/V component. The

code numbers are listed by categories of devices, then by brand.

See page 33 for a category list.

Press and hold both the MAIN and ENT (Enter) buttons for approxi-

mately three seconds. The top of the display will show “SETUP”.

You are in SETUP mode now.

Note: You have 30 seconds to perform a step while you are in SETUP mode. If

you don’t press a button within that time, the Osiris will time out and return to

normal operation.

MAIN

Button ENT

Button

MX-350

MX350 Manual.qxd 8/13/2004 10:03 AM Page 5

Press the P-PRO button to select the Pre-Programmed Method.

The display changes so that you can select which Device button to

setup.

In this step you choose the name of the device you’d like to setup.

Use the cursor UP or DOWN buttons to change the flashing name.

When it is correct, press the SELECT button.

For Example: I wanted to setup the TV Device button first, so I pressed the

cursor UP or DOWN until “TV” was flashing in the display.

The bottom of the display will flash “FROM TABLE”.

P-PRO

Button

The Osiris

SELECT

DOWN

SETUP

P-PRO

LEARN

EDIT

MACRO

FAV

1 0F 2

P-PRO

CABLE

DVD

VCR

AUDIO

PRESS

Press a Page button to display the

other five Device names.

First

Five

Device

Names

MX350 Manual.qxd 8/13/2004 10:03 AM Page 6

In this step you verify the type of component you plan to operate

with this device button. If the flashing name is correct, press

SELECT.

If the name flashing in the display is incorrect (for example, you are setting up

AUX to operate a Laser Disc Player), use the UP and DOWN buttons to

change the flashing name to the correct type of component.

Note: Each name that appears in the display may include several types of

components. For example, the DVD category includes DVD players and

Laser Disc Players. See page 33 for a list of component types each Code

Table contains.

Point the Osiris at the component, then enter the first three digit

code number from your notes using the numbered buttons. After

you enter each three digit number, look at the component to see if

it turned off.

Continue to enter code numbers until the

component powers off.

For Example: I have a Sony TV. I found the code

numbers 070, 139,147, 126, 185, 194 and 085 under Sony in the TV

TABLE. Using the numbered buttons on the Osiris, I entered 070 and

looked at the TV. It

didn’t turn off, so I entered 139, then 147 and so on, until I found the code

that powered off the TV.

SELECT

Use the

number

buttons to

enter the

code

number.

MX-350

MX350 Manual.qxd 8/13/2004 10:03 AM Page 7

Note: If a component fails to turn off after you have entered all of the code

numbers listed for your brand, you can scan through the other brands in the

table using the UP and Down buttons, then tapping either the Power On or

Power Off buttons to see if the component powers off (there is a chance that

your component was actually manufactured by another brand). However,

most of the code tables are so large it is usually faster to use the Learning

Method on Page 10.

When the component turns off, save the code number you entered

by pressing the SAVE button that appears on the screen.

Exit SETUP mode by pressing the MAIN button two times. When

the display shows “MAIN”, you are back in normal operating

mode.

SAVE

Button

Code

Number

You

Entered

MAIN

Button

The Osiris

Scan Up to the next Code

Number

Scan Down to the previous

Code Number

Press Power On or Power

Off to test if the device

powers off.

089

DOWN

SAVE

EXIT

PRESS

089

DOWN

SAVE

EXIT

PRESS

SETUP

P-PRO

LEARN

EDIT

MACRO

FAV

1 0F 2

MX350 Manual.qxd 8/13/2004 10:03 AM Page 8

Table des matières

Autres manuels Universal Remote Control Télécommande

Universal Remote Control

Universal Remote Control ONE FOR ALL 8800CMN Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-800 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR-J550TVE Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control ORION MX-850 Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-1200 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-800 Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8800L Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-DCT Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control TRC-820 Manuel utilisateur

Universal Remote Control

Universal Remote Control MASTERCONTROL RF20 Manuel utilisateur

Universal Remote Control

Universal Remote Control PHAZR-5 series Manuel utilisateur

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5L-9000L-IP Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR3-EXP Manuel utilisateur

Universal Remote Control

Universal Remote Control INSIGHT M2067BX3 Manuel utilisateur

Universal Remote Control

Universal Remote Control CABLEVISION UR2-CBL-CV04 Manuel utilisateur

Universal Remote Control

Universal Remote Control R5 Manuel utilisateur

Universal Remote Control

Universal Remote Control MX-6000 - Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation

Universal Remote Control osiris Manuel utilisateur

Manuels Télécommande populaires d'autres marques