Unitech MS912 Mode d'emploi
The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx Page 1of 6
Contents
General Rules .......................................................................................................................................................................... 1
Programming - Unitech MS912 (Bluetooth) ........................................................................................................................... 2
Programming - Symbol LS2208 (USB wired) ........................................................................................................................... 4
Unitech MS910 - Blue Tooth Connection................................................................................................................................ 4
Special Instruction............................................................................................................................................................... 4
Apple Device ....................................................................................................................................................................... 4
Android Device.................................................................................................................................................................... 5
Windows Device................................................................................................................................................................. 5
Switching between Keyboard and Blue Tooth Scanner.......................................................................................................... 6
Apple ................................................................................................................................................................................... 6
Android (Samsung Galaxy 4) ............................................................................................................................................... 6
Computer Devices/Browsers supported................................................................................................................................. 6
General Rules
MSI bar code must be enabled
Must expand UPC-E to UPC-A
Scanners other than the two below may function but are not supported.
Blue Tooth scanner must programmed to have postscript ‘#’ added to each scan
*NOTE: When you see a bar code in this document, you are supposed to scan it as part of the set-up.
The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx Page 2of 6
Programming - Unitech MS912 (Bluetooth)
1. Reset to factory Defaults.
2. Set Profile to HID.
3. Enable iOS Hotkey. You will be able to double click the trigger to enable/disable the keyboard.
4. Enable the MSI bar code.
5. Expand UPC-E bar code to UPC-A bar code.
6. Add the ‘#’ character to the end of each scan (Very Important).
7. Set “Power Off”to 15 minutes
8. Pair/Connect the scanner with your device (name is ‘Wireless Scanner’).
The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx Page 3of 6
The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx Page 4of 6
Programming - Symbol LS2208 (USB wired)
1. Set all Defaults.
2. Enable the MSI bar code.
3. Expand UPC-E bar code to UPC-A bar code
4. Erase any rules in place for the scanner.
5. Pair/Connect the scanner with your device (name is ‘Wireless Scanner’).
Unitech MS910 - Blue Tooth Connection
Special Instruction
To turn on the scanner, press the button until you hear a single beep or until you see the scanner working.
Before connecting to device (pairing), be sure that the LED light is blinking green. If not then be sure that it has been
turned on and is not paired with any other device.
If scanning is paused for too long, the scanner may turn off to save battery life. Turn it on and wait for one minute
before using the scanner so that it has a chance to reset itself.
Apple Device
1. Click ‘Settings’ icon
2. Select ‘Bluetooth’ and Turn On
3. Turn on the wireless scanner
4. Select ‘Wireless Scanner’ from list (it may take a couple of minutes to appear in list)
5. Scanner will be moved to ‘My Devices’ and will say ‘Connected’. Try this step again if not successful
The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx Page 5of 6
Android Device
1. Select the ‘Settings’ App
2. Select the ‘Connections’ tab (at very top of page)
3. Select ‘Bluetooth’ and Turn On
4. Turn on the wireless scanner
5. Click ‘Scan’ to load all wireless devices. Continue to click ‘Scan’ until ‘Wireless Scanner’ appears.
6. Select ‘Wireless Scanner’ from list
7. It will say ‘Pairing’ and eventually get moved to the ‘Paired Devices’ section and will say ‘Connected’. Try this step
again in not successful.
Windows Device
1. Turn on wireless scanner
2. From the ‘Control Panel’, under ‘Hardware and Sound’, click ‘Add a Device’
3. Locate ‘Wireless Scanner’ (it will appear as a wireless keyboard) and select it (it may take a couple of minutes to
appear in the list) then click ‘Next’
4. The scanner will be connected, click ‘Close’
5. It will appear in the list of devices as a keyboard.
The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx Page 6of 6
Switching between Keyboard and Blue Tooth Scanner
The blue tooth scanner will try to act as a replacement for the onboard key board. Follow the following guidelines when
switching between the two.
Apple
Be sure that scanner is awake and press the scan button twice to toggle the keyboard on and off.
Android (Samsung Galaxy 4)
Should recognize both.
Computer Devices/Browsers supported
Newer Apple iPod, iPad, and iPhone devices
oSafari (default)
oWhen testing the iPod, the scan was slow and ‘Done’ had to be pressed after each scan.
Samsung Galaxy 4 or higher (Android)
oDefault browser
oGoogle Chrome
Windows 7 or higher
oInternet Explorer 10 or higher
oGoogle Chrome version 42 or higher
oFirefox version 37 or higher
Other devices/browsers may work but are not supported.
Autres manuels pour MS912
7
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Unitech Lecteur de codes-barres
Unitech
Unitech MS842P Manuel utilisateur
Unitech
Unitech MS840B Manuel utilisateur
Unitech
Unitech MS838 Manuel utilisateur
Unitech
Unitech MS351 Manuel utilisateur
Unitech
Unitech MS840 Manuel utilisateur
Unitech
Unitech MS920P Manuel utilisateur
Unitech
Unitech MS910 Manuel utilisateur
Unitech
Unitech MS650 Manuel utilisateur
Unitech
Unitech MS840P Manuel utilisateur
Unitech
Unitech MS840P Manuel utilisateur
Unitech
Unitech RH767 Manuel utilisateur
Unitech
Unitech ES700 Manuel utilisateur
Unitech
Unitech MS926 Manuel utilisateur
Unitech
Unitech MS962 Manuel utilisateur
Unitech
Unitech MS84X-2 Manuel utilisateur
Unitech
Unitech MS335 Manuel utilisateur
Unitech
Unitech MS852 Manuel utilisateur
Unitech
Unitech MS860 Bluetooth Manuel utilisateur
Unitech
Unitech MS851B Manuel utilisateur
Unitech
Unitech MS842RB Manuel utilisateur
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
