Unique UGP-60L1 Manuel utilisateur

60L / 80L / 120L

AC/DC PORTABLE

FRIDGE/FREEZER

OWNER’S GUIDE

80L / 2.8 cu. ft.

UGP-80L1

120L / 4.2 cu. ft.

UGP-120L1

60L / 2.1 cu. ft.

UGP-60L1

TABLE OF CONTENTS

03 Installation and operation of your Unique portable AC/DC

fridge/freezer

04 Defrosting the cabinet

05 UGP-60L/UGP-80L Portable fridge/freezer: features

06 UGP-120L Portable fridge/freezer: features

07 Power requirements

07 Using the connection guards

07 AC power connection

08 DC power connection

08 Replacing the fuse

09 Temperature settings and LCD display

11 12/24V DC battery management settings

13 Connecting to a battery

13 Using solar panels

14 Using portable generators

15 Tips and suggestions

16 Technical speciﬁcations

17 Troubleshooting

18 Appliance information

18 Notes

19 Contact us

19 Limited warranty

INSTALLATION AND OPERATION OF

YOUR UNIQUE PORTABLE AC/DC

FRIDGE/FREEZER

It is important that your fridge/

freezer is installed and oper-

ated in accordance with the

manufacturer’s instructions to

guarantee the performance,

efﬁciency and operation.

• Position the fridge/freezer in

a safe and secure location, out

of the reach of rain/snow and

excessive wind. Prolonged

exposure to heat sources or

direct sunlight can aect the

unit’s performance and e-

ciency.

• The normal operation of the fridge/freezer requires heat to be radi-

ated away from the condensers located in the end of the cabinet.

Ensure the vented areas of the cabinet are kept clear at all times to

allow adequate airﬂow to the compressor.

• The cooling system has been

designed to continue operat-

ing correctly when the fridge/

freezer is positioned on angles

up to 35˚. It is recommended

that the time the unit is ex-

posed to angles over 30˚ is

limited to no more than four

(4) hours continuous opera-

tion.

IMPORTANT: After transit where the fridge/freezer is on

its side or back, ensure fridge/freezer is in a level, up-

right position for 3-4 hours to allow compressor ﬂuids

to redistribute evenly before use.

DEFROSTING THE CABINET

If your appliance is being used primarily as a freezer, it is possible

that an ice build-up on the interior may occur. This build up can af-

fect the performance and eciency of the cooling system and must

be removed.

Do not use pointed tools, knives or sharp utensils, or signiﬁcant force

to remove the ice as this may result in damage to the unit. Turn the

fridge/freezer o and empty the cabinet of food/drinks. Allow the

ice to melt and then drain the water from the cabinet. Use a soft,

clean cloth to wipe down all surfaces and allow the fridge/freezer to

dry completely.

IMPORTANT

This fridge/freezer is not intended for use by children or persons

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they are under supervision or

instruction concerning the use of the fridge/freezer by a person

responsible for their safety.

• This is not a toy. Do not allow children to play with or within the

fridge/freezer.

• The fridge/freezer is suitable for outdoor and camping use and

should not be exposed to rain or snow or other inclement weather.

INSTALLATION AND OPERATION OF

YOUR UNIQUE PORTABLE AC/DC

FRIDGE/FREEZER continued

UGP-60L/UGP-80L PORTABLE

FRIDGE/FREEZER FEATURES

Powder coated

steel exterior

Stainless steel lid

latches

Sturdy side handles

Digital control panel

Protective corners

Internal LED light

Protective insulated

cover

Wireless remote

(not included with UGP-60L)

DC power cord

with 10 amp fuse

Battery alligator

clips

AC power cord

Interior insulated

compartment lids

UGP-120L PORTABLE

FRIDGE/FREEZER FEATURES

Dual insulated

compartment lids

Powder coated

steel exterior

Stainless steel lid

latches

Sturdy side

handles

Digital control

panel

Protective

corners

Internal LED light

Protective insulated cover

Wireless

remote

DC power cord

with 10 amp fuse

Battery alligator

clips

AC power cord

POWER REQUIREMENTS

The Unique UGP-60L, UGP-80L and UGP-120L portable fridge/freez-

ers are designed to operate on AC and DC voltage inputs.

AC input Voltage is required to be 110V AC at 50 - 60 Hz

DC input Voltage is require to be 12 or 24 DC +/- 10%

Velcro connection guards on

either end of the DC power cord

and the battery alligator clips or

AC power cord.

Velcro connection guards

wrapped around each other to

secure connection.

AC POWER CONNECTION

USING THE VELCRO

CONNECTION GUARDS

The Unique UGP-60L, UGP-80L and UGP-120L portable fridge/

freezers are supplied with an approved 2 pin AC power cord. It is

recommended that this cord is not lengthened as this may result in a

voltage drop and reduced performance.

To ensure a secure connection between the DC power cord and the

battery alligator clips or AC power cord, the ends of the Unique

UGP-60L, UGP-80L and UGP-120L power cords are supplied with

velcro connection guards.

• Insert DC power cord (cigarette lighter end) into the female end of

the battery alligator clip or AC power cord.

• Wrap the velcro ties from either cord end around each other to

ensure a secure connection and no loss of power.

DC POWER CONNECTION

REPLACING THE FUSE

2-3

4-5

The Unique UGP-60L, UGP-80L and UGP-120L portable fridge/freez-

ers are supplied with a vehicle DC plug (cigarette lighter plug). It is

recommended that this cord is not lengthened as this may result in a

voltage drop and reduced performance.

When connecting the fridge/freezer to DC, plug the power cord into

the DC socket on the fridge/freezer and then plug the other end of

the power cord into the DC supply.

The supplied DC power cord comes with an in-line fuse. If the red

indicator light on the DC cigarette plug is not illuminated, there is

either no DC voltage being supplied or the fuse is blown. See below

for fuse replacement instructions.

*Only use the DC power cord that is supplied with the fridge/freezer.

The Unique UGP-60L, UGP-80L and UGP-120L portable fridge/freez-

ers are supplied with 2 additional replacement 10A fuses. These can

be found in a plastic bag attached to the cord. If the indicator light

on the DC power cord is not illuminated, it could mean that the fuse

has blown. Here is how to replace the fuse:

1. Unscrew the black

plastic end cap from

the DC power plug.

2. Unscrew the metal

threaded tip of the DC

power plug to expose

the cylindrical 10 amp

fuse.

3. Remove blown fuse and

replace with a new fuse.

4. Replace metal threaded

tip of DC power plug and

screw back into place.

5. Replace black plastic

end cap of the DC power

plug and screw into

place.

Black plastic end cap

Metal threaded tip

10 A fuse

TEMPERATURE SETTINGS

AND LCD DISPLAY

Both the fridge/freezer control panel and the wireless remote read-

out display the following information:

• the current set temperature

• the actual internal cabinet temperature

• the supply voltage at the inlet connection to the fridge/freezer

Follow the same steps when using either the on the fridge/freezer

control panel or the wireless remote read-out.

To use the wireless remote, simply plug it in to a suitable 12V DC

(cigarette lighter plug) and within 5 to 10 seconds it will connect to

the fridge and will display the same information as per the display

on the fridge.

Battery monitor

voltage setting

Fan symbol spins

when compressor

is running

Cabinet temperature

settings

Snowﬂake symbol indicates

compressor is in maximum

speed mode

(NOT RECOMMENDED FOR

SOLAR AND BATTERY USE)

Battery

symbol

ﬂashes

when the

battery

monitor is

activated

TO SET THE TEMPERATURE

IN THE LEFT CHAMBER

STEP 1

Push the SET button once, the

digital display on the left will

start to ﬂash with the tempera-

ture that the control is currently

set to.

STEP 2

To change the setting push the

UP or DOWN button until you

reach the desired temperature.

The display will ﬂash several

times before returning to the

current cabinet temperature.

To change the temperature

setting repeat steps 1 and 2.

TO SET THE TEMPERATURE

IN THE RIGHT CHAMBER

STEP 1

Push the SET button twice, the

digital display on the right will

start to ﬂash with the tempera-

ture that the control is currently

set to.

STEP 2

To change the setting push the

UP or DOWN button until you

reach the desired tempera-

ture. The display will ﬂash sev-

eral times and then stop on the

temperature you have set. The

display will ﬂash several times

before returning to the current

cabinet temperature.

To change the temperature

setting repeat steps 1 and 2.

TEMPERATURE SETTINGS

AND LCD DISPLAY continued

NOTE

The fridge/freezer will automatically start to operate after 2-3 min-

utes when the DC input power source is connected.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Unique Réfrigérateur

Unique

Unique UGP 15 Instructions d'installation

Unique

Unique UGP-330L W AC Manuel utilisateur

Unique

Unique UGP 8 Manuel utilisateur

Unique

Unique UGP-470L Manuel utilisateur

Unique

Unique UGP-370L1 Manuel utilisateur

Unique

Unique UGP-50L1 Manuel utilisateur

Unique

Unique UGP 3 Instructions d'installation

Unique

Unique UGP 22 DV Manuel utilisateur

Unique

Unique UGP 3 SM Mode d’emploi

Unique

Unique UGP-290L Manuel utilisateur

Unique

Unique UGP-10 Instructions d'installation

Unique

Unique Classic UGP-230L Manuel utilisateur

Unique

Unique UGP 6C CR Manuel utilisateur

Unique

Unique UGP-275L B AC Manuel utilisateur

Unique

Unique UGP-120L1 W Manuel utilisateur

Unique

Unique PRESTIGE UGP-278L P S/S Manuel utilisateur

Unique

Unique UGP-470L1 Manuel utilisateur

Unique

Unique Classic UGP-275L AC Manuel utilisateur

Unique

Unique UGP 22 Manuel utilisateur

Unique

Unique UGP 6C Guide de configuration

Unique

Unique UGP 13 Instructions d'installation

Unique

Unique UGP-170L1 Manuel utilisateur

Unique

Unique LGP 18 Manuel utilisateur

Unique

Unique UGP-80L1 W Manuel utilisateur

Manuels Réfrigérateur populaires d'autres marques

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuel utilisateur

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuel utilisateur

Sharp

Sharp SJ-BA31IEXW2-EU Manuel utilisateur

CORBERO

CORBERO CC2300MCW Manuel utilisateur

KitchenAid

KitchenAid 2205264 Manuel utilisateur

Stengel

Stengel KU 1101 A++ Manuel utilisateur

NEFF

NEFF KI181 Series Manuel utilisateur

Hoshizaki

Hoshizaki Reach-In Manuel utilisateur

Amana

Amana ASD2524VES00 Manuel utilisateur

BOMANN

BOMANN KGC 213 Manuel utilisateur

Danby

Danby DAR044A1SLDD Instructions de montage

Samsung

Samsung RF323TE Manuel utilisateur

Beko

Beko CSA31022 Manuel utilisateur

IKEA

IKEA FROSTIG C 185 E Manuel utilisateur

Electrolux

Electrolux ER 6821 D Manuel utilisateur

True

True TS-28 Manuel utilisateur

Frigidaire

Frigidaire FSC23R5DW9 Manuel utilisateur

Beko

Beko LSP4579W Manuel utilisateur