Uniden BTS200 Manuel utilisateur

BTS200 High-Definition

Speaker

Haut-parleur haute

définition BTS 200

Questions? Problems?

Get help on the web at www.uniden.com

or call our Customer Service line at 800-292-2294.

Questions? Problèmes?

Obtenez de l’aide au www.uniden.com

ou en communiquant avec le soutien à la clientèle au 800-292-2294.

2 - English

TABLE OF CONTENTS

Important Safety Instructions ...... 3

BTS200 HIGH-DEFINITION

SPEAKER........................................ 4

What’s Included...............................5

SET UP YOUR BTS200 SPEAKER ..... 5

Install the Battery ...........................5

Charge the Battery .........................5

Turn on Your Speaker .....................6

Pair Your Bluetooth Device to Your

Speaker........................................6

GETTING TO KNOW THE BTS200

SPEAKER........................................ 7

BTS200 Top/Front ...........................7

BTS200 Side.....................................9

BTS200 Back..................................10

BTS200 SPEAKER OPERATION ..... 10

Basic Cell Phone Operations ........11

Basic Music Operation..................13

SPECIAL FEATURES .......................14

Charge Cellphone using

a USB Cable ...............................14

Play Music through a Wired

Connection ................................15

Manage SRS WOW HD™ On/O ...16

TROUBLESHOOTING.....................16

Reset your BTS200 Speaker .........18

Battery Features ...........................18

SPECIFICATIONS ...........................19

English - 3

Important Safety Instructions

•Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or

near a swimming pool.

•Do not use this product while driving.

•Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to ames or dispose of it

in a re: the battery may explode. Check with local authorities for possible battery disposal instructions.

•Do not disassemble, modify, or attempt to repair any component of this product.

•Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive. Always give

full attention to driving and pull o the road and park before making or answering a call if driving conditions require.

SAVE THESE INSTRUCTIONS!

BTS200 HIGH-DEFINITION SPEAKER

Uniden’s BTS200 high denition Bluetooth speaker provides clear stereo sound in a

compact, portable package. With Bluetooth V2.1 compatability, the BTS200 pairs with your

cell phone to become a speakerphone for hands free conversations. You can also connect

your music player (wired or wireless) for crisp, clear audio.

•Bluetooth V2.1 + EDR.

•Supporting A2DP/AVRCP/HFP proles.

- A2DP: Advanced Audio Distribution Prole

- AVRCP: Audio/Video Remote Control Prole

- HFP: Hands Free Prole

4 - English

•Rechargeable Lithium-Ion polymer battery.

•Portable

•Up to 5 hours of play from a fully-charged battery.

•Call Waiting feature

•SRS WOW HD™ : Available when playing music through a 3.5 mm minijack cable (not

included) connection.

The BTS200 speaker is not a data storage device; do not attempt to copy les to it.

What’s Included

•BTS200 Speaker

•AC Adapter (PS-0043)

•Lithium-Ion polymer battery (BT-1026)

SET UP YOUR BTS200 SPEAKER

Install the Battery

1. Remove the battery from any protective packaging and discard the packaging

accordingly.

2. Align the battery pack with the guides along the inside of the battery area. Be sure the

contact slots are in the correct position to close on the contacts.

3. Slide the battery in until you hear the latch click.

English - 5

Charge the Battery

1. Insert the adapter’s DC jack into the DC connection.

2. Plug the adapter into an AC power supply (standard wall outlet).

Your battery must be fully charged (more than 7.5 hours) before you can use your speaker.

Turn on Your Speaker

When you turn on your speaker for the rst time, it automatically goes into pairing mode.

The Bluetooth icon ( ) ashes rapidly and is ready to pair, The next time you turn on your

speaker, it searches for already paired devices and then moves into a standby state.

1. Press and hold for at least 3 seconds.

2. All LEDs light and a power on tone sounds.

3. ashes slowly while looking for Bluetooth devices. It remains steady on when

Bluetooth devices are discovered; otherwise, it goes out.

4. and LEDs go out.

6 - English

Pair Your Bluetooth Device to Your Speaker

Make sure your speaker has been fully charged and is in pairing mode.

1. Select a BT V2.1 or above device (mobile phone or music player) to pair.

2. Select the Searching mode on your Bluetooth device (refer to your Bluetooth device’s

owner’s manual for details if necessary).

3. Your Bluetooth device should nd BTS200; select it and use 0000 for a pairing code if

necessary.

4. Verify that you are connected to your speaker. The Bluetooth icon moves to a steady ON

state when pairing is complete.

English - 7

GETTING TO KNOW THE BTS200 SPEAKER

BTS200 Top/Front

Key name Icon Press to ...

Mute Mute your conversation from

the caller.

Talk Handle phone calls.

Power Turn on your BTS200 speaker.

Volume

Down Decrease the volume.

Volume Up Increase the volume.

Play/Pause Start, pause, and stop music.

Bluetooth link LED

POWER

Microphone

Battery

Release

MUTE

PLAY/PAUSE

Power LED

DOWN

Talk

8 - English

LEDs

Icon Status Meaning

Power On (green) BTS200 is turned on and operating.

O BTS200 is turned o.

Bluetooth Slow blink BTS200 is looking for paired Bluetooth devices.

Fast blink BTS200 is ready to pair to a Bluetooth device.

Steady on BTS200 is connected to a Bluetooth device.

English - 9

BTS200 Side

Battery release

latch

Battery

indicator

LEDs

USB portBattery

indicator

button

Use this... To...

Battery indicator button Display the level of power left in the battery through the

LEDs.

Battery Indicator LEDs Display the remaining power level when you press the

battery indicator button (see p.XX).

USB port Use the BTS200 battery to charge your cell phone (see p.

XX).

Battery release latch Unlock the battery for removal.

10 - English

BTS200 Back

Bass

output

3.5mm Audio In

jack

Power

adapter

input

Use this... To...

Audio In Insert the audio cable’s jack.

Bass output Hear the bass sound.

DC 5.4V Insert the power adapter.

BTS200 SPEAKER OPERATION

Press and hold for at least 3 seconds to turn on your speaker.

The and keys control the speaker’s volume level during callphone operation and

music playback. Press and release the keys to increase or decrease the volume level one

step at a time. Press and hold and to quickly raise and lower the volume levels.

Autres manuels pour BTS200

Table des matières

Autres manuels Uniden Intervenants