Uniden UIP312 Manuel utilisateur

User Guide V 1.6

(S/W v1.2.8, Bootrom v3.1.2)

UIP312 CENTREX IP TELEPHONE

Revision History

• No changeT, Ryu07/22/031.6

•Change the Incoming Call log [9.2.2]T, Ryu04/01/031.5

DESCRIPTIONRESP.ENGR.DATEVersion

-i-

Table of Contents

1. Safety Information ……………………………………………………………………………….……

2. Introduction …………………………………………………………….. …………………………….

3. Package Contents …………………………………………………………………………………….

4. Phone Description ……………………………………………………………………..……………..

5. How the Keys Work ………………………………………………………………………..….………

6. Quick Installation ……………………………………………………………………………………..

6.1 Installing the Phone ……………………………………………………………………

6.2 How to Use the Headset and Headset Adapter …………………………………….

6.3 Placement of the Phone ……………….………………………………………………

6.4 Using Power Over LAN ………………………………………………………………..

7. How to Use the Multi-Line Features ……………………………………………………………….

7.1 Description ……………………………………………………………………………..

7.2 Idle State ………………………………………………………………………………..

7.3 Making a Call …………………………………………………………………………...

7.4 Receiving a Call ………………………………………………………………………..

7.5 Disconnecting a call ……………………………………………………………………

8. Phone Operation ……………………………………………………………………………………….

8.1 How to Use the Handset and Speakerphone ………………………………………..

8.2 Adjusting the Handset and Speakerphone Volume ……………………….………..

8.3 Adjusting the Ringer Volume …………………….……………………………….……

8.4 Muting a Call ………………….…………………………………………………….…..

8.5 Redialing the Last Number ………………………………………………………….…

8.6 Holding a Call ……………………………………………………………………………

8.7 Caller ID …………………………………………………………………………..……..

8.8 Call Information ………………………………………………………………………….

8.9 Headset Audio Path ……………………………………………………………………..

8.10 Inputting Characters (Dial Pad) ……………………………………………………….

9. Using the MENU Options ……………………………………………………………………………..

9.1 Menu Structure …………………………………………………………………………..

9.2 Call History ………………………………………………………………………………

9.2.1 Outgoing Calls ……………………………………………………………………

9.2.2 Incoming Calls ……………………………………………………………………

9.3 Speed Dial ………………………………………………………………………………..

9.3.1 How to Set Up Your Speed Dial …………………………………..……………

9.3.2 How to Use Speed Dial .…………………………………………………………

- ii -

9.4 Phone Setting …………………………………………………………………………..

9.4.1 VMS Number ……………………………………………………………………

9.4.2 Ring Type ……………………………………………………………………….

9.4.3 Display Name ……………………………………………………………..…….

9.4.4 Phone Function ……………………………………………………..………….

9.4.4.1 Do Not Disturb ………………………………………………………..

9.4.4.2 Disable Redial …………………………………………………………

9.5 System ………………………………………………………………….………………

9.5.1 New Password …………………………………………………………….……

9.5.2 Change Password ……………………………………………………………..

9.5.3 Clear Password …………………………………………………………………

9.5.4 Time ……………………………………………..………………………………

9.5.4.1 AUTO Mode ………………………………………………………….

9.5.4.2 MANUAL Mode ………………………………………………………

9.5.5 Country & SP …………………………………………………………………..

9.5.6 Reboot …………………………………………………………………………..

9.6 Information …………………………………………….….……………………………

9.6.1 Version ……………………………………….………………….…….………..

9.6.2 Network …………………………………………….………………….………..

9.6.3 IP Phone ..….………………………………………..………………………….

10. Using the SETUP menus

10.1 Address Setting ………………………………………………………………………

10.1.1 GK Address ………………………………………..…………………..…….

10.1.2 ALIAS Number ………………………………………………………….……

10.1.3 H235 Password ………………………………………………………………

10.2 Voice ………………………………..………………………………….……………..

10.2.1 Select Codec ………….………………………………………….………..…

10.2.2 Jitter Buffer …………………………………………………..…………..…..

10.3 Priority …………………………………………………………………………………

10.3.1 Signal DiffServ ……………………………………………….……….……..

10.3.2 Voice DiffServ …………………………………………………..…….……..

11. Display Information ………………………………………………………………………………….

12. Troubleshooting Guide ……………………………………………………………………………..

13. Frequently Asked Questions ………………………………………………………………………

14. FCC Statement ……………………………………………………………………………………….

15. Glossary ……………………………………………………………………………………………….

- iii -

1. Safety Information

Utmost care and attention has been devoted to quality standards in the manufacture of your new

Phone. Safety is a major factor in the design of every set. But, safety is your responsibility too.

To avoid injury and damage to the phone, please follow these important safety instructions when

installing, using your phone.

1. To reduce the risk of an electrical shock, do not disassemble this phone. There are no user

serviceable parts. Opening or removing covers may expose you to hazardous voltages.

Incorrect reassembly can cause an electrical shock.

2. Never push objects of any kind into this phone’s housing slots since such objects may touch

hazardous voltage points or short out parts that could result in a risk of an electrical shock.

3. Only use Unshielded Twisted Pair (UTP) Category 5 Ethernet cable to connect to this phone’s

RJ-45 ports (Uplink and Downlink).

4. Always use this phone with the required power source. The proper power source required for

this phone is written on the power adaptor you received with this phone. If you are unsure of the

type of power supplied to your premises, consult your local power company before installing

this phone. Use only the adaptor provided.

(Output: DC 18V/ 600mA, (-)---(o---(+))

5. Do not connect or disconnect cables during an electrical storm.

6. Do not connect this phone directly to a standard telephone line. Although the RJ11 connector

for a traditional telephone fits into the RJ-45 ports of this phone, the electrical interfaces are not

compatible and the phone will not work.

7. Do not connect to headset connector any unfloating device, such as PC or amplifier, which may

result ground loop. Use non-amplifier headset only.

8. Disconnect the power to this phone and have it checked by a qualified service personnel if any

of the following occurs:

• the power supply cord or plug is damaged or frayed

• the phone was exposed to water or had liquid spilled on it

• the phone has been dropped or the cabinet has been damage

• after following the User Guide, the phone does not operate properly

Page 1

2. Introduction

This Phone is an advanced phone that allows users to achieve perfect voice communication over

the IP network without using a personal computer. Not only does the Phone support all the

conveniences and functions of a digital key system phone, it also perfectly integrates all the merits

and features of analog and IP phones over the data communication system. As voice signals are

automatically compressed using audio CODECs, they can be transmitted over a low bandwidth

without interference from other data signals. Furthermore, to provide consistent superior voice

quality over varying and congested IP network conditions, the Phone is equipped with advanced

Quality of Service (QoS) technologies such as CODEC negotiation, enhanced jittering technology,

lost packet reconstruction, echo cancellation, and packet delay recovery.

For Technical Support please call 1-800-648-4921.

About This Guide

User’s Guide version 1.6 is applicable to software release 1.2.8, which consists of Bootrom version

3.1.2 and application version 1.2.8. If a Bootrom version other than version 3.1.2 is used with

application version 1.2.8, the phone may not operate properly in some cases.

Page 2

3. Package Contents

The following items are included in your Phone package.

• One phone body

• One Handset Cord

• One DC 18V 600mA Adapter

• One User Guide

• One UTP Cable (2m)

• One Headset Adapter

• One Foot Stand

Foot Stand

Phone Body

Handset Cord Power Adaptor

User Guide UTP Cable

Headset Adapter

Page 3

4. Phone Description

VOLUME

REDIAL

FLASH

Message Waiting Lamp

SHIFT Key

FLASH Button

REDIAL Button

MUTE Button

Function Keys

(F1~F14)

Speed dial label

Display LCD

Soft Keys

Handset

Arrow Keys

Volume Key

Dial Pad

Speakerphone Button

Moves to upper menu

Moves Up

Moves Down

Moves to previous menu Line Selection LED

Moves to sub menu

Page 4

5. How the Keys Work

MENU Pressing the MENU key display this phone’s MENU items, such as Call History,

Speed Dial, Phone Setting, System, Information, Setup and Exit.

CANCEL Pressing the CANCEL key allows an item selected from the MENU screen to be

exited or canceled

LINE1 Selects Line 1

LINE2 Selects Line 2

½¾The LEFT and RIGHT arrow keys have multiple functions.

( LEFT, RIGHT ) 1. Menu browsing

1) Pressing the LEFT arrow key changes the display to the previous screen.

2) Pressing the RIGHT arrow key changes the display to the next screen for the

item you selected.

2. Editing

1) Pressing the LEFT arrow key deletes your last input.

2) Pressing the RIGHT arrow key moves the cursor to the right. In menu items

such as in Speed dial Name that allow space input, the RIGHT arrow key is also

used as a way to input a space along with the DTMF “0” button.

iÀThe UP and DOWN arrow keys have multiple functions.

( UP , DOWN ) 1. Menu browsing

Pressing the UP or DOWN arrow keys allows you to scroll up or down the

MENU or SETUP screen.

2. Editing

Pressing the UP arrow key is equivalent to pressing the RIGHT arrow key

while pressing the DOWN arrow key is the same as pressing the LEFT

arrow key.

SOFT KEYS (Buttons on both sides of LCD screen) The soft keys have multiple functions.

When the phone displays MENU screen, pressing the soft key

aligned with an item will display the submenu for that item.

The bottom right key is also used as the enter key in the menus where the user can

enter provisioning values.

Page 5

VOLUME The VOLUME Keys have multiple functions.

1. Pressing the VOLUME key allows you to control the handset, speakerphone, and

ringer volume. Volume levels are as follows:

Handset: 0 to 6 / Ringer: 0 to 6 / Speakerphone: 0 to 6 / Headset 0 to 6

2. While editing such menu items as Speed dial Name that allow both upper case and

lower case letters, pressing the VOLUME UP key capitalize the current letter.

Pressing the key again changes the letter back to its lower case.

FLASH Pressing the FLASH button allows you to place the current caller on hold and make

another call to complete a three way call. The hook switch does not serve as FLASH

REDIAL Pressing the REDIAL button instructs the phone to automatically dial the

most recently dialed number.

MUTE Pressing the MUTE button prevents the party you are speaking to from

hearing what you say

SPEAKERPHONE Pressing the Speakerphone button allows you to make a call without

using the phone’s handset.

MESSAGE When the Message Waiting Lamp is blinking, the phone is

WAITING LAMP indicating that you have a message.

Note: This lamp functions as a button as well. Throughout this document,

“the Lamp”, “the Message Waiting Lamp”, “the Message Lamp”, “the Voice

Message Lamp”, “VMWI Lamp”, and “the VMS button”, all these terms are

interchangeably used for this button/lamp.

SHIFT Pressing the SHIFT key allows you to access Function keys F8~F14.

FUNCTION KEYS After entering names and numbers in Speed Dial, you can use the

Function keys as Speed Dial keys.

DTMF KEYS Used in dialing as well as when entering alphanumeric characters in menus

(DIAL Pad) for names and numbers such as Speed dial menu.

Page 6

Table des matières

Autres manuels Uniden Téléphone IP

Uniden

Uniden DECT1588 Series Manuel utilisateur

Uniden

Uniden Strata DKT3010-SD Manuel utilisateur

Uniden

Uniden DECT1725 Series Manuel utilisateur

Uniden

Uniden TRU9488 - TRU 9488 Cordless Phone Base... Manuel utilisateur

Uniden

Uniden DECT 3236 Manuel utilisateur

Uniden

Uniden DECT 3216 Manuel utilisateur

Uniden

Uniden SSE33 Series Manuel utilisateur

Uniden

Uniden VP100 Manuel utilisateur

Uniden

Uniden DECT4096 Manuel utilisateur

Uniden

Uniden UIP1868P Manuel utilisateur

Uniden

Uniden WDECT 2355+3 Manuel utilisateur

Uniden

Uniden WDECT 2355 Manuel utilisateur

Uniden

Uniden UIP200 - VoIP Phone Manuel utilisateur

Uniden

Uniden DTL-8R-1 Manuel utilisateur

Uniden

Uniden SSE33 Series Manuel utilisateur

Uniden

Uniden UIP300 Manuel de service

Uniden

Uniden UIP300G Manuel de service

Uniden

Uniden DECT 1805 Manuel utilisateur

Uniden

Uniden UIP1868P Manuel utilisateur

Uniden

Uniden TRU9496 - TRU 9496 Cordless Phone Base... Manuel utilisateur

Uniden

Uniden UIP1868P Manuel utilisateur

Uniden

Uniden DSS2415 Manuel utilisateur

Uniden

Uniden XDECT SSE27 series Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur