Uniden AMWUC511 Manuel utilisateur

Welcome

Thank you for purchasing a Uniden Multi-Handset

phone.

Note: Illustrations in this manual are used for

explanation purposes. Some illustrations in this

manual may differ from the actual unit.

Accessibility

Uniden provides a customer service hotline for

accessibility questions. If you have a disability and

need customer service assistance or if you have

any questions about how Uniden’s products can

accommodate persons with disabilities, please call

the accessibility voice/TTY line: 1-800-874-9314.

A representative is available to talk to you M-F,

8:00 am to 5:00 pm, CST. After hours, you can

leave us a message, and we will call you back.

Information is also available on our website,

www.uniden.com, under the “Accessibility” link.

Introducing your Digital Cordless Telephone

• Crystal clear digital sound quality

• Caller ID* to see who’s calling before you pick

up the phone

• 30 Number Caller ID

• 100 Phonebook entries

• Last 10 number redial

•

10 handset ringer options (6 Melodies and 4 Tones)

• Room monitor**

• Sound enhancer lets you adjust the tone of your

earpiece to your personal preference.

• Integrated telephone answering machine

(DECT180/DECT180-2 only)

* Feature requires Caller ID service from your

local telephone company. There is usually a fee

for this service.

** Multiple handset are required for these features.

In this guide you will find all the information you

need, explained simply to help you get the most

from your phone.

IMPORTANT

This equipment is not designed for making

emergency calls when the power fails. Alternative

arrangements should be made for access to

emergency services.

[1]

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 1

Preliminaryowner'smanualDRAFTforAMWUC511/AMWUU644



Note:FCCstatementandRFexposureinformationareshowninpage

48/54-49/54.



Setting up 4

Finding a location 4

Connecting your phone 4

Preparing the handsets 5

Installing and charging the handset battery pack 5

Battery Low Warning 6

Battery Performance 6

Setting the date and time 6

Connecting the telephone line cord 6

Your handset 7

Your base 8

Your handset display 9

Standby Display 10

Quick Guide 11

Using your phone 12

Make a call 12

Adjust the earpiece/speaker volume during a call 12

Make a call by pre-dialing 12

Handset range 12

Call timer 12

Handsfree 12

End a call 13

Receive a call 13

Call Waiting 13

Receiving internal calls 13

Muting the ringer 13

Redial 14

Redial the last number called 14

Redial any of the last 10 numbers called 14

Store a redial number to the phonebook 14

Deleting numbers from the redial list 15

Mute (privacy) 15

Finding/paging handsets 15

Keypad lock 16

Conversation recording

(DECT180/DECT180-2 only) 16

Using the phonebook 17

Store a phonebook name/number 17

View and dial a phonebook entry 18

Edit a phonebook name/number 18

Delete a phonebook name/number 19

Copy phonebook names/numbers 19

Check available memory space 19

Handset and base menu settings 20

Handset ringer volume 20

Handset ringer type 20

Auto talk 21

Sound enhancer 21

Appointment 21

Alarm 22

Handset name 22

Talk display 22

Language 23

Base ringer volume (DECT180/DECT180-2 only) 23

Base ringer type (DECT180/DECT180-2 only) 24

Prefix dialing 24

Seven-Digit Dialing 25

Call barring 25

[2]

Contents

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 2

[3]

Settings menu 26

Tones 26

Dial Mode 26

Tone Dialing Switch-Over 27

Registering a new handset 27

De-register a handset or a base 28

Base PIN code 29

Selecting a base 29

Resetting your phone 30

Default settings 31

Network services 32

Caller ID 32

Call Waiting Tone 32

Calls log 32

View the Calls log 33

Copy Calls log number to the phonebook 33

Delete Calls log entry(ies) 34

Message waiting (DECT160/DECT160-2 only) 34

Using extra handsets 35

Room monitor 35

Using room monitor 35

Call another handset (internal or intercom call) 36

Answer an external call while on an internal call 36

Transferring a call 36

Conference call 37

The Telephone Answering Machine

(DECT180/DECT180-2 only) 38

Answering Machine Operation from a Handset 38

Message Playback 38

Record Memo 38

Answering Machine Settings 38

Answer on/off 39

Play/Delete/Record OGM 39

Select OGM 39

Setting Call Screen 39

Using Call Screen 39

Ring Delay 40

Message Length 40

Setting Remote PIN 40

Message Alert 40

Language 40

Using the Base Answering Machine 41

Remote Access Away from Home 42

Simple solutions 43

Handset/Base 43

Caller ID 44

Telephone Answering Machine

(DECT180/DECT180-2 only) 44

General information 45

Specifications 45

Maintenance 45

Cleaning your product 45

Replacing the handset battery pack 45

Liquid Damage 46

Precautions 47

I.C. Notice 50

Warranty 51

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 3

Setting up

Follow these simple steps to prepare your

phone for use.

Finding a location

• The location should be close to both a phone

jack and a continuous power outlet (one which

is not connected to a switch).

• The base and handset should be kept away

from sources of electrical noise such as motors,

microwave ovens, and fluorescent lighting.

• For better reception, place the base as high as

possible.

• The base should be placed in an open area for

optimum range and reception.

• If your home has wired alarm equipment

connected to a phone line, be sure that

installing the system does not disable your

alarm equipment. If you have questions about

what will disable alarm equipment, contact your

telephone company or a qualified installer.

Connecting your phone

1 Connect the base power supply to the back of

the base. Plug the other end into the wall

electrical outlet.

WARNING

Use only the power supply that came with your

phone.

Using another power supply could seriously

damage your phone and invalidate your

warranty.

Do not connect the telephone line cord until

your handset is fully charged. This will prevent

the risk of the phone being answered before the

battery pack is charged. Answering the phone

before the battery pack is fully charged may

prevent them from reaching their optimum

capacity.

2 If you have purchased a model containing

multiple handsets and chargers, connect each

charger's power supply to the charger base and

plug into a wall electrical outlet.

[4]

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 4

[5]

Preparing the handsets

Installing and charging the handset battery pack

1On each handset:

Remove the battery compartment cover.

Press down on the semi-circle indent and slide

the cover off.

Connect the supplied battery pack with the

correct polarity.

Slide the battery cover back until it clicks

securely into place.

2 To charge the battery, place the handset(s) on

the base or on a charger. The charging light in

the base illuminates. While charging, the

symbol scrolls and when the handset is fully

charged, all the bars of the battery symbol will

be filled when the phone is off the cradle.

If the charging light does not come on, reposition

the handset in the base or charger, ensuring that

the charging points contact. You must charge

each handset for 15-20 hours before use.

NOTE: Once your handset is fully charged, your

phone is designed for the base charge

LED to turn off for approximately 4

seconds during the following instances:

1)just after reaching a full charge

2)1 minute after reaching a full charge

3)every 5 minutes after reaching a full charge

To alleviate the charge LED from blinking on the

base, you can simply remove the handset from

the charging cradle.

You may also select to leave the handset in the

cradle, which will not damage the unit. Once fully

charged, you may notice the charge LED light will

turn for 4 seconds every 5 minutes. This is normal

operation and does not mean your unit is

defective.

WARNING

Under no circumstances should non-

rechargeable batteries be used. Only use the

supplied battery pack or you will invalidate your

guarantee and may damage the telephone.

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 5

BATTERY LOW WARNING

If the symbol is displayed on the handset,

CHARGE BATTERY

appears and you hear the

low battery tone, you will need to recharge your

handset.

For optimum performance, be sure to return the

handset to the cradle after each call. If the

handset is left off of the base, the actual talk

time duration will be reduced respective to the

amount of time the handset is off the cradle.

Battery Performance

The handset may become warm during charging,

this is normal. On a single charge your handset

will give 16 hours talk time and 7 days standby

time.

Over time, as the batteries wear out, the charge

capacity will reduce, therefore, reducing the

talk/standby time of the handset.

Eventually the battery pack will need to be

replaced.

Setting the date and time

The phone uses the 24 hour clock.

In standby:

1 Press .

2 Press or until

Time & Alarm

displayed and press .

3 Press or until

Set Date&Time

displayed and press .

4 Enter Day, Month, and Year using the keypad,

e.g. 030605 for 3rd June 2005, and

press .

5 Enter Hour and Minute using the keypad, and

press .

6 Press to return to standby.

Connecting the telephone line cord

1 Connect the telephone line cord into the TEL

LINE jack on the back of the base.

Plug the other end into the telephone outlet.

Setting up your phone is complete.

Now you can make and receive calls.

[6]

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 6

Earpiece

Display

Clear

Talk

Down/Phonebook

Speaker

CID/Flash

Microphone

Up/Redial

Menu/OK

End/Turn on/off

Intercom

Lock

Temporary Tone

• Use to delete incorrect digits or letters.

• Press to go back to the previous menu.

• Press and hold to mute the

ringer temporarily.

• Press to make and receive calls.

• Press during a call to decrease the

earpiece or speaker phone volume.

• Use to scroll through the phonebook,

menu, redial list, or CALLER ID log.

• Use to access the phonebook list.

• Use for handsfree.

• Press and hold to play messages.

(DECT180/DECT180-2 only)

• Use for flash and conference function.

• Use to access the CALLER ID log.

• Press and hold to insert a pause.

Use when making internal calls,

conference calls or for transferring calls

(if you have more than one handset

registered to your base).

Press and hold to switch the

handset keypad lock On and Off.

Press and hold to switch the

dial mode to tone temporarily.

• Press during a call to increase the

earpiece or speaker phone volume.

• Use to scroll through the phonebook,

menu, redial list, or CALLER ID log.

• Use to access the redial list.

Note: Each handset can be turned off to conserve battery life. To turn off the handset, press and hold .

When the handset is turned off, you cannot make or receive calls on that handset. To turn the handset

on again, press and hold or place the handset in the charger.

• Press to access the menus.

• Press to confirm a setting.

• Use for handset call screening.

• Press to end a call.

• Press to exit the menu mode and return

to standby.

•Press and hold to turn handset on or off.

Your Handset

[7]

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 7

Tobe

newphoto

AC power (yellow)

Answering Machine LED Display

Telephone line AC power (yellow)

Telephone line

Charge LED

Find HS

• Press to page handset(s).

skip

• Press to play next message.

repeat/back

• Press to replay

messages.

delete

• Delete a message.

Ans (answering machine)

on/off

• Press to turn answering

machine On or Off.

volume

• Adjusts answer machine

speaker volume.

play/stop

• Press to play messages.

• Press to stop playback.

• Lights up when handset is

charging in the cradle.

In Use LED

• Lights up when handset is

in use.

Your base

[8]

for DECT180/DECT180-2 for DECT160/DECT160-2

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 8



Tobe

newphoto



Tobe

newphoto

Your handset display

Symbol Explanation

Always displayed when your handset is

on, shows the battery status.

Battery fully charged.

Half charged.

Empty and you hear a warning tone -

the battery is low and needs charging.

Remains steady when the line is in use.

Flashes while connecting and

receiving calls.

The call is muted.

Displayed when you have a new voice

message. (DECT160/DECT160-2 only)

Symbol Explanation

Displayed when you are in handsfree.

Displayed when the ringer volume is set

to OFF.

Always displayed when your handset is

on, shows the handset is linked to the

base.

Flashes and you hear a warning tone

during a call if the handset moves out of

range, you will need to move closer to

the base for clearer reception.

Indicates the alarm has been set.

Displayed when the keypad has been

locked.

Flashes when new messages are

recorded.

Displayed when messages are played.

(DECT180/DECT180-2 only)

[9]

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 9

[10]

Standby Display

Once charged, your handset display will appear as illustrated below, displaying the handset name and

number, and time and date. This is referred to as ‘standby mode’.

For example:

Battery Level Indicator

Handset-Base Signal Indicator

You can personalize your handset

with your name (see page 22).

Day/Month

Time of Day

Handset Number

UC504DH(DECT160-2) OM 8/17/06 3:37 PM Page 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Uniden Téléphone sans fil

Uniden

Uniden EXAI4580 - EXAI 4580 Cordless Phone Manuel utilisateur

Uniden

Uniden EXT 1865 Manuel utilisateur

Uniden

Uniden EXAI 398 Series Manuel utilisateur

Uniden

Uniden DXAI7288-2 Manuel utilisateur

Uniden

Uniden EXI5160 - EXI 5160 Cordless Phone Manuel utilisateur

Uniden

Uniden TRU9585 - TRU 9585 Cordless Phone Manuel utilisateur

Uniden

Uniden DECT160 Manuel utilisateur

Uniden

Uniden TRU9465 Series Manuel utilisateur

Uniden

Uniden TCX930 - TCX 930 Cordless Extension Handset Manuel utilisateur

Uniden

Uniden XC3545 Manuel utilisateur

Uniden

Uniden TRU9460 Manuel utilisateur

Uniden

Uniden DXI4560-2 Manuel utilisateur

Uniden

Uniden EXAI2980 Series Manuel utilisateur

Uniden

Uniden EXP 6900 SERIES Manuel utilisateur

Uniden

Uniden D1779-BT Manuel utilisateur

Uniden

Uniden MER 9600C Manuel utilisateur

Uniden

Uniden ELITE 9005 Manuel utilisateur

Uniden

Uniden EXI976C - EXI 976C Cordless Phone Manuel utilisateur

Uniden

Uniden DXAI685 Manuel utilisateur

Uniden

Uniden DXAI5688-2 - DXAI Cordless Phone Guide de l'utilisateur

Uniden

Uniden EXAI3985 Manuel utilisateur

Uniden

Uniden UIP1869V Manuel utilisateur

Uniden

Uniden DECT2085-4WX Manuel utilisateur

Uniden

Uniden WDECT 2310 Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques

3Com

3Com NBX Manuel utilisateur

Panasonic

Panasonic KX-TGK210HK Manuel utilisateur

Panasonic

Panasonic KX-TCA181EX Manuel utilisateur

BT FREESTYLE 3200 Manuel utilisateur

AT&T

AT&T CL84102 Manuel utilisateur

BREZZICNI

BREZZICNI CL-3622 Manuel utilisateur

Panasonic

Panasonic KX-TG1831NZ Manuel utilisateur

Panasonic

Panasonic KX-TG7301E Manuel utilisateur

Furuno

Furuno FM-4721 Manuel utilisateur

Sanyo

Sanyo CLT-J70 Manuel utilisateur

Amplicomms

Amplicomms BigTel 201 Manuel utilisateur

GE 26992 Manuel utilisateur

AT&T

AT&T E1812B Manuel utilisateur

Sanyo

Sanyo CLT-670 Manuel utilisateur

GE 15432970 Manuel utilisateur

Curtis

Curtis TC595 Manuel utilisateur

Gigaset

Gigaset Gigaset 3000 Micro Manuel utilisateur

Poly

Poly VVX D230 Guide de configuration