Unicont SPb MV-1504 Manuel utilisateur
Unicont SPb Ltd
Marine LCD Display
MV-1504/1704/1904/2104
Operating Manual
(04-0-13122013)
St. Petersburg
2013
v.0.0
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 2
Table of Contents
1.GENERAL INFORMATION..........................................................................................4
2.DELIVERY SET...............................................................................................................4
3.SPECIFICATIONS ..........................................................................................................5
4.MOUNTING AND CONNECTION ...............................................................................6
5.CONTROLS ....................................................................................................................10
6.TRANSPORTATION AND STORAGE ......................................................................11
7.WARRANTY ..................................................................................................................12
8.DATE OF PACKING.....................................................................................................13
9.ACCEPTANCE DETAILS ............................................................................................13
10.DATE OF COMMISSIONING .....................................................................................13
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 3
This operating manual (OM) is designed for marine LCD display MV-1504/1704/1904/2104.
The OM is designed for study of design, operation principles and operation rules of the
device for its intended use and maintenance. The OM may also be a source of information about the
device to compile relevant sections of the equipment operational documentation in which the device
can be used as an integral part.
Important! The company-manufacturer does not assume any responsibility that comes with
loss or damage resulting from use of this product or related documentation.
All information in this manual is distributed by the company for information purposes only.
They are subject to change without notice of consumers; they may contain errors or inaccuracies.
Information specified may not include an obligation on the part of the company Unicont Spb Ltd.
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 4
1. GENERAL INFORMATION
Marine LCD MV-1504/1704/1904/2104 series MasterView is a multipurpose display used to
output visual data received from the navigation system and other automated systems.
2. DELIVERY SET
1. Marine LCD MV-xx04 1 piece
2. Plate/desktop mounting brackets 1 piece
3. Operation Manual 1 piece
4. VGA cable 1 piece
5. DVI cable 1 piece
6. Feeding cable 1 piece
7. Sunscreen 1 piece
As an option you may choose to add the following items to the scope of supply:
Touch-sensitive screen (touch screen), model of execution is marked with MV-xx04 TS
CD with drivers.
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 5
3. SPECIFICATIONS
Table 1. Versions
Parameter MV-1504 MV-1704 MV-1904 MV-2104
Power supply voltage 110/220 VAC / 9...36 VDC
Power demand 40 W 60 W 80 W 100 W
Display diagonal 15” 17” 19” 21”
Viewable area of the screen 305 х229 mm 337 х270 mm 377 х302 mm 432 х324 mm
Angle of view 160° 170° 170° 178°
Contrast 400:1 1000:1 700:1 1000:1
Brightness 430 Cd/m2300 Cd/m2300 Cd/m2300 Cd/m2
Response time 25 ms 5 ms 5 ms 5 ms
Resolution 1024 х768 1280 х1024 1280 х1024 1600 х1200
Point size 0.297 mm 0.264 mm 0.294 mm 0.27 mm
Vertical repetition frequency: 56–75 Hz
Horizontal repetition
frequency: 30–63 kHz 30–81 kHz 30–81 kHz 31–91 kHz
Dimensions (mm) 371х340.5х77 411.5х388х75 449х418х75 510х443х81
Max. weight: 7 kg 9 kg 12 kg 15 kg
Protection class: IP 22
Storage temperature -55...+75°С
Operating temperature -25...+55°С
Backlight intensity is adjusted by the dimmer and can be fully cancelled (“deep dimming”).
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 6
4. MOUNTING AND CONNECTION
Device casing provides for it to be mounted on the desktop and on the plate.
If plate mounting is chosen, refer to the dimensional drawing (Figure 1) to prepare the
location where the display is to be mounted to the control panel plate with fixing holes. If desktop
mounting is chosen, attach the brackets to the display casing, prepare the location and tighten M5
screws to fix the display to the brackets.
Mounting being completed, lay connecting cables from external devices and connect it to the
matching display connectors. Tighten the fixing screws to avoid their inadvertent disengagement.
After mounting and connection are completed, power the device up and ensure that the
graphical data are properly output on the screen.
It is possible to connect several video signal sources (1 x VGA, 1 x DVI, 2 x AV and 1 x S-
Video).
Power Connector
Power Pin 1 Pin 2
24 VDC +18...36 VDC 0 VDC
220 VAC L N
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 7
DVI Connector
Pin number Designation Pin number Designation
1 DATA2- 16 HOT PLUG DET
2 DATA2+ 17 DATA0-
3 DATA2/4 SHIELD 18 DATA0+
4 DATA4- 19 DATA0/5 SHIELD
5 DATA4+ 20 DATA5-
6 DDC CLK 21 DATA5+
7 DDC DATA 22 CLOCK SHIELD
8 ANALOG VSYNC 23 CLOCK+
9 DATA1- 24 CLOCK-
10 DATA1+
11 DATA1/3 SHIELD С1 ANALOG RED
12 DATA3- С2 ANALOG GREEN
13 DATA3+ С3 ANALOG BLUE
14 +5V POWER С4 ANALOG HSYNC
15 GND С5 ANALOG GND
Composite Connection (Composite Input)
display
signal
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 8
S-Video Connector
Pin number Designation Pin number Designation
1 GND 3 Brightness
2 GND 4 Color
VGA Connector
Pin number Designation Pin number Designation
1 Red 9 NC
2 Green 10 GND
3 Blue 11 GND
4 GND 12 SDA
5 GND 13 HSYNC
6 Red GND 14 VSYNC
7 Green GND 15 SCL
8 Blue GND
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 9
Figure 1. Dimensions
Version Dimension (mm)
A B C D E F G H I
MV-1501 371 357 60 220.5 58 14 340.5 311 343
MV-1701 411.5 395.5 75.5 217 58 19.5 388 352 373
MV-1901 449 433 75.5 247 58 19.5 418 382.5 411.5
MV-2101 509.5 493.5 77 269 67 17 443 410.5 475.5
Unicont SPb Ltd Operating manual MV-1504/1704/1904/2104
Page 10
5. CONTROLS
Dimmer (Backlight)
Set Button (to apply
changed parameters and
to access menu items)
Menu Access Button
Power LED
Setting Selection
and Change Buttons
Display Power on/off
Button
(to choose
video signal sources)
The following controls are located on the front panel:
1. Display Power on/off button (short-time pushing switches the display over cycle-wise
according to the video signal sources).
2. “MENU”. Enter/exit button to access the display settings menu. When in the menu, this
button allows to exit the active setting without saving the changed parameter.
3. “▲” and “▼”. Selection buttons to select a menu item/parameter measurement. When in
the menu, this buttons allow to scroll up the items (settings) up and down. If any setting is changed,
they are used to increase/decrease its value.
4. Dimmer to control the backlight intensity. Turn it up to the stop in direction right to
maximize the backlight intensity. Turn it up to the stop in direction left to cancel it (no backlight).
5. Power LED shows that power is available and the device is operating. If power is on and
video signals are received from the current video input, this LED is green. If power is off or no video
signal available in the current input, the LED goes out.
Warning! Changing backlight intensity automatically and correspondingly changes the LED-
light intensity. If it is in the minimum (backlight cancelled), the LED will go out.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Unicont SPb Moniteur
