Ultimate Ears BLAST Mode d'emploi

How to use the BLAST & MEGABLAST Diagnostic Tool

The BLAST MEGABLAST Diagnostic Tool is an application for your PC or Mac that lets you

recover an unresponsive speaker and reset it to the factory default settings. The tool also has the

ability to gather diagnostic information that can be emailed to Customer Care to help them

troubleshoot problems. The tool is available for Windows (10, 8, and 7), as well as MacOS

(10.10+).

Mac OSX Diagnostic Tool Windows Diagnostic Tool

Running the BLAST MEGABLAST Diagnostic Tool

1. Download the tool and then open it. Mac users should drag the file into the Application

folder. Follow the onscreen instructions to install.

2. Connect your speaker to the computer using the USB cable that came with the speaker.

NOTE: It’s important that you use the included cable as it supports data transfers. If you

need a replacement cable please contact Customer Care.

3. If possible, turn your speaker on. If your speaker won’t turn on, the tool will still work,

however.

4. Open the tool using the icon on your desktop, or from the Application folder on your

Mac.

5. If the speaker is not detected by the utility, check the USB connection between the

speaker and your computer, and then click Refresh Data in the upper left corner of the

tool.

6. If the tool still doesn’t detect your speaker, please contact Ultimate Ears Support.

7. Once your speaker has been detected, information for it will be displayed.

8. To reset the speaker to factory defaults click Reset to Factory Defaults.

NOTE: Resetting to factory defaults will clear all customer configured information on the

speaker. This includes any previously paired devices and Wi-Fi settings. After resetting

the speaker you’ll need to go through the app setup again before you can connect to Wi-

Fi or use Alexa.

9. Once the reset completes, turn your speaker on and use the BLAST & MEGABLAST

app to set it up.

Creating a Diagnostic File

If your speaker continues to be unresponsive after the reset or has other issues in general, please

use the following steps to create a Diagnostic File.

1. Open the BLAST MEGABLAST Diagnostic Tool.

2. Connect your speaker to the computer using the USB cable that came with your speaker.

NOTE: It’s important that you use the included cable as it supports data transfers. If you

need a replacement cable please contact Customer Care.

3. Your speaker should automatically turn on after being connected to your computer. If it

doesn’t, turn it on now. If the utility doesn’t recognize your speaker, click Refresh Data

in the upper left corner of the tool.

4. Under Reset To Factory Defaults, click Create Diagnostic File.

5. Review the information and then click OK to continue.

6. The diagnostic file will be created and automatically saved to your computer’s desktop.

IMPORTANT: If the utility doesn’t recognize a Serial Number for your speaker, add

something to the name of the diagnostic file to associate it to you, such as a case number

if you have one, or your first and last name.

7. When you contact Ultimate Ears Support, let them know that you have run the BLAST

MEGABLAST Diagnostic Tool and the agent will let you know where to email the file

so it can be reviewed.

HOW TO RESET A BLAST OR MEGABLAST THAT WON’T TURN ON

WARNING This procedure can permanently damage your speaker and should ONLY be used if the

speaker won’t turn ON. Frequent use of the reset procedure is NOT recommended.

1. Briefly press the “-“ (volume down), “+” (volume up) and small action/Bluetooth buttons at the same

time (See picture below).

2. Next, press the large power button on the speaker and it will turn back ON.

Note: it may take a few moments for the speaker to reconnect to Alexa or repair to your mobile device.

3. After resetting the speaker, it’s highly RECOMMENDED that you use the Ultimate Ears app (available

from the app stores for iOS and Android) to check for available firmware updates for your speaker. To

do this, launch the app > tap on the settings icon > scroll to the bottom of the screen and press “Check

for Updates.” (Depending on the version of the app you may need to disable Automatic Updates before

you can manually check for updates. If prompted, follow the instructions to update your speaker’s

firmware.

Autres manuels pour BLAST

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ultimate Ears Intervenants

Ultimate Ears

Ultimate Ears MEGABOOM REMIX 2 Manuel utilisateur

Ultimate Ears

Ultimate Ears BLAST Manuel utilisateur

Ultimate Ears

Ultimate Ears S00163 Manuel utilisateur

Ultimate Ears

Ultimate Ears WONDERBOOM Manuel utilisateur

Ultimate Ears

Ultimate Ears BOOM 3 Guide d'installation

Ultimate Ears

Ultimate Ears WONDERBOOM Guide d'installation

Ultimate Ears

Ultimate Ears WONDERBOOM Manuel utilisateur

Ultimate Ears

Ultimate Ears BOOM 3 Fiche technique

Ultimate Ears

Ultimate Ears Boom Instructions de montage

Ultimate Ears

Ultimate Ears MEGABOOM Guide de l'administrateur

Ultimate Ears

Ultimate Ears Boom Manuel utilisateur

Ultimate Ears

Ultimate Ears BLAST Manuel utilisateur

Ultimate Ears

Ultimate Ears WONDERBOOM Manuel utilisateur

Ultimate Ears

Ultimate Ears WONDERBOOM Guide de configuration

Ultimate Ears

Ultimate Ears WONDERBOOM Manuel utilisateur

Ultimate Ears

Ultimate Ears BOOM 2 Manuel utilisateur

Ultimate Ears

Ultimate Ears MEGABOOM Guide d'installation

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur