Disconnection from the mains
The mains plug is the main separating element. Unplug the power adapter to completely discon
from the power source. Make sure that the socket is close to the device and easily accessible. Never use this
device near damp places such as Wash basins, bathtubs or ponds and lakes.
Important safety instructions!
For your own safety, you should read this chapter completely first!
DANGER!
Electric shock due to improper ma
Only connect the device to a properly connected mains socket with a mains voltage of 230V ~ / 50 Hz using the
mains adapter supplied. Do not make any changes to the plug
check the insulation
of the cable for damage. Never immerse the device in water. Only wipe it with a slightly
damp cloth. Failure to observe this may result in an electric shock, fire and danger to life. If you are unsure,
contact an authorized electrician.
WARNING!
This product is designed for indoor use only.
Make sure that the power adapter or its cable is never wet or wet
gets wet. Do not place any objects filled with liquids, e.g. Cups or beer bottles, next to or on the device. Avoid
direct sun
light, heavy dirt and strong vibrations. Always handle the power adapter directly. Do not pull on the
cord and never touch the AC adapter with wet hands as this may cause a short circuit or electric shock.
Scope of delivery:
1x "ULSmart", 1x power cord,
Please check whether all parts included in the scope of delivery are actually in the packaging!
Intended Use:
This information sheet contains important information on t
this information is available to everyone who uses this device.
The type plate and serial number are on the back of the device.
ULSmart converter uses the Art-
Net protocol to receive and distribute DMX512 s
has a 10 / 100BASE-
T interface (RJ45) for the Ethernet connection and 8 XLR connections for the DMX output
(4096 channels) and 2 for the DMX input (1024 channels). Configuration is carried out directly on the device using
4 control buttons and an LCD display. The device is intended for rack installation with 1 height unit.
The device is only approved for a power connection with AC voltage, AC100
Devices such as the "
ULSmart " are sensitive and technicall
care. Therefore, avoid vibrations and the effects of mechanical shock during assembly / dismantling and when
using the device.
Use the "
ULSmart " only in places that are protected from dust, moisture and
operating temperature must be in the range
50% (at + 45 °)! Direct sunlight must be avoided during use and also during transport. For your own safety and
th
at of other people, make sure that there are no cables lying
In the event of a thunderstorm, the device must be disconnected from the mains!
Always make sure that no liquid can get into the device!
Disconnection from the mains
The mains plug is the main separating element. Unplug the power adapter to completely discon
from the power source. Make sure that the socket is close to the device and easily accessible. Never use this
device near damp places such as Wash basins, bathtubs or ponds and lakes.
For your own safety, you should read this chapter completely first!
Electric shock due to improper ma
Only connect the device to a properly connected mains socket with a mains voltage of 230V ~ / 50 Hz using the
mains adapter supplied. Do not make any changes to the plug
-
in power supply, cable or socket and regularly
of the cable for damage. Never immerse the device in water. Only wipe it with a slightly
damp cloth. Failure to observe this may result in an electric shock, fire and danger to life. If you are unsure,
This product is designed for indoor use only.
Make sure that the power adapter or its cable is never wet or wet
gets wet. Do not place any objects filled with liquids, e.g. Cups or beer bottles, next to or on the device. Avoid
light, heavy dirt and strong vibrations. Always handle the power adapter directly. Do not pull on the
cord and never touch the AC adapter with wet hands as this may cause a short circuit or electric shock.
1x "ULSmart", 1x power cord,
1x user manual.
Please check whether all parts included in the scope of delivery are actually in the packaging!
This information sheet contains important information on t
he safe operation of the device. Make sure that
this information is available to everyone who uses this device.
The type plate and serial number are on the back of the device.
Net protocol to receive and distribute DMX512 s
ignals over a network. The device
T interface (RJ45) for the Ethernet connection and 8 XLR connections for the DMX output
(4096 channels) and 2 for the DMX input (1024 channels). Configuration is carried out directly on the device using
4 control buttons and an LCD display. The device is intended for rack installation with 1 height unit.
The device is only approved for a power connection with AC voltage, AC100
-240V, 50 / 60Hz.
ULSmart " are sensitive and technicall
y sophisticated devices that must be handled with
care. Therefore, avoid vibrations and the effects of mechanical shock during assembly / dismantling and when
ULSmart " only in places that are protected from dust, moisture and
excessive heat. The permitted
operating temperature must be in the range
-
5 ° to + 45 ° Celsius and the relative air humidity
50% (at + 45 °)! Direct sunlight must be avoided during use and also during transport. For your own safety and
at of other people, make sure that there are no cables lying
around.
In the event of a thunderstorm, the device must be disconnected from the mains!
Always make sure that no liquid can get into the device!
from the power source. Make sure that the socket is close to the device and easily accessible. Never use this
Only connect the device to a properly connected mains socket with a mains voltage of 230V ~ / 50 Hz using the
in power supply, cable or socket and regularly
of the cable for damage. Never immerse the device in water. Only wipe it with a slightly
damp cloth. Failure to observe this may result in an electric shock, fire and danger to life. If you are unsure,
gets wet. Do not place any objects filled with liquids, e.g. Cups or beer bottles, next to or on the device. Avoid
light, heavy dirt and strong vibrations. Always handle the power adapter directly. Do not pull on the
cord and never touch the AC adapter with wet hands as this may cause a short circuit or electric shock.
he safe operation of the device. Make sure that
ignals over a network. The device
T interface (RJ45) for the Ethernet connection and 8 XLR connections for the DMX output
(4096 channels) and 2 for the DMX input (1024 channels). Configuration is carried out directly on the device using
4 control buttons and an LCD display. The device is intended for rack installation with 1 height unit.
y sophisticated devices that must be handled with
care. Therefore, avoid vibrations and the effects of mechanical shock during assembly / dismantling and when
excessive heat. The permitted
5 ° to + 45 ° Celsius and the relative air humidity
must not exceed
50% (at + 45 °)! Direct sunlight must be avoided during use and also during transport. For your own safety and
