UDI R/C UDI009 Manuel utilisateur
UDI009
User Manual
2
Important Statement 3
Safety Precautions 3
Safe Notice for Battery 4
Part installation and disassemble 8
Checklist before Flight 10
Boat and Transmitter instruction 5
Playing Steps 10
Boat function introduction 16
Maintenance and Repair 16
Spare Parts 17
Troubleshooting Guide 19
Catalogue
www.udirc.com
3
Important Statement
Thank you for buying Udirc's product. Our product is special control substances and
people who under 14 years old must not use the product. Please read this brochure
carefully before using the product. You are regarded as accepting all contents in this user
manual when using this product.
This product is not an ordinary toy but a piece of complicated remote boat model which is
integrated with professional knowledge by mechanic, electronic, air mechanics,
high-frequency emission etc. It’s supported to play the boat under legal laws and safety
water area. The users promise to be responsible for their behavior when using this product.
We undertake no liability for those accidents caused by environment, illegal behavior,
improper operation and refitting after sale of the product.
We have entrusted the distributor to provide technology support and after-sale service. If
you have any question about use, operation, repair etc., please contact the local distributor.
This product is suitable for experienced R/C model users aged 14 years or above.
This product contains small parts, please put it out of child’s reach.
The playing field must be legally approved by your local government. Do not play the boat
in the swimming pool or near the people who is swimming in the water area. Playing field
must spacious enough.
(1) Playing field
* Keep the package and user manual so as to refer to the important
information whenever.
* Only use the UDIRC’s original or authorized spare parts and accessories, otherwise,
we are not responsible for any injuries or damage(s) that may caused.
Safety Precautions
(3) Keep away from obstacles and crowd
The speed and status of a running RC boat is uncertain and it may cause potential danger.
So the user must keep away from crowd, obstacles in the water etc. when operating a
running RC boat. Do not play the boat in rainy, storm, thunder and lighting weather for the
safety of user, around people and their property.
(2) Use correctly
For safety elements, please only use UDIRC’s spare parts to replace the damaged parts.
Improper assembly, broken hull, defective electronic equipment or unskilled operation all
may cause unpredictable accidents such as boat damage or human injury. Please pay
special attention to safety operation and have good knowledge of accident responsibility
that the user may cause.
(4) Keep away from salt water environment
The boat inside is consisted of precise electronic components. Salt water may damage
electronic components and cause accident.
www.udirc.com
4
(5) Safe operation
Please operate the RC boat in accordance with your physical status and playing skill.
Fatigue, listlessness and improper operation may increase the rate of accident. Before
playing the boat, please make sure no water plants to avoid propeller from getting tangled
as this may cause damage to boat. It’s not suggested to play it under this condition.
(6) Keep away from rotating parts
After power on the boat, rotating parts like propellers may cause serious injury and
damage. Keep face and body away from rotating parts.
(7) Keep away from heat
(8) The boat should be controlled within max control distance. Do not play the
boat in place with signal interference. Or may cause signal interruption and
the boat will be out of control, which may result in accident.
(9) Do not touch the hot motor to avoid being burnt.
(10) Please use the recommended charger only. Power off the boat before
cleaning it. Check the charger, charging plug etc. regularly to ensure they can
work well. If there is any damage, stop using it immediately till it’s fixed well.
The RC boat is made of metal, fiber, plastic, electronic components etc. Keep away from
heat and sunshine to avoid distortion and damage.
Safe Notice for Battery
www.udirc.com
* Keep the battery away from children and animals.
* Discontinue charging if you notice the battery is swollen.
* Do not charge the battery once it is crashed or damaged.
* Check the battery if any damage after crash.
* Do not overcharge the battery.
* Keep the battery away from flammable material or liquid.
* Do not put the battery on high temperature place, store it in a proper container to avoid
damage or explode.
* Do not put the battery into your pocket or bag to avoid contacting with sharp objects or
metal.
* Do not dissemble, refit and repair the battery.
* Do not use the battery to crash or hit hard surface.
* Do not put the battery in water and keep it in dry place at ambient temperature.
* Do not leave the battery without supervision when charging.
* Make sure that there is no short circuit of the power wire.
* Please use the recommended charger only.
* Check the charger’s wire, plug, surface regularly. Do not use any broken charger.
* If do not play the boat more than one week, maintain the boat battery.
5
www.udirc.com
Boat and Transmitter instruction
Boat
Main Parameter
Hull spec
Hull weight
Propeller diameter
Sailing time
424x114x89mm
About 565g
(battery not included)
35mm
6-8mins(full speed) Max Speed 30Km/H
100 m
220mins
Boat battery 7.4V 1500mAh
Lipo Battery
charging time
Control range
Support bracket
Cabin outer cover
Left navigation
Propeller
Water press
pieces
Outer cover
lock
Right
navigation
Tail rudder
bracket
Rods
Deck
Hull bottom
Outlet plug
Tail rudder
Spindle tube
6
www.udirc.com
11
Hull bottom
22
Tail rudder support frame
No. Name Name
Outlet plug
Name
1
Cabin outer cover
12
23
Tail rudder
2
Cabin inner cover
13
Inner lock
24
Steering engine
3
EVA waterproof ring
14
Inner cover lock press
25
Spindle tube
4
Boat surface cover
15
Boat re-position 3.5 round plug
26
Anti-slip nut
5
Waterproof tablet
16
Outer cover lock
27
Battery holder
6
Lithium battery
17
28
Silicone waterproof ring
7
Spindle tube holder
18
Outer cover lock press
8
Drive spindle
19
Right navigation Pressure water sheet
9
Receiver box
20
Servo holder
10
Main motor
21
Rod
No. No.
29
Left navigation
30
Silicone tube
Exploded diagram
12
13
01
02
03
04
05
06
07
08
09
10
11
14
15
16
17
18
29
30
19
20
21
22
23
24
25
26
27
28
7
www.udirc.com
Steering knob
Throttle trigger
Transmitter
Button Function
Forward trim
Press down this button to adjust the throttle forward deviation.
Backward trim
Press down this button to adjust the throttle backward deviation.
Left Rudder trim
Press down this button to adjust the tail rudder left turning deviation.
Right Rudder trim
Press down this button to adjust the tail rudder right turning deviation.
Power switch
Push left to power on the transmitter, and back to power off.
Steering knob
Twist forward the knob, the boat turns right. Twist backward the knob,
then turn left.
Throttle trigger
Pull down the throttle trigger and the boat goes forward. Push up the
trigger,then go backward.
Forward trim
Backward trim
Power indicator
Left Rudder trim
Right Rudder trim
Power switch
Open the battery cover on the back side of the transmitter and put 4 1.5V alkaline
batteries (AA, not included) into the box in accordance with electrode instructions.
Battery installation
Battery Cover
Battery Case
8
www.udirc.com
Safety Precautions
1. While charging, do not put the battery on high temperature place, such as fire
or heating device to avoid damage or explode.
2. While charging, the battery must be from the boat model.Someone needs to be
looked after in the charging process to avoid accident.
3. Don’t charge for the Lipo batteries at once after running, and the battery is still
not yet cooling down. Otherwise, it may cause battery to get swollen.
Li-Po Battery Disposal&Recycling
Wasted Lithium-Polymer batteries must not be placed with
household trash. Please contact local environmental or waste
agency or the supplier of your model or your nearest Li-Po
battery recycling center.
Charging Instruction for Lithium battery
Boat battery
* For faster charging, it is recommended to use adapter with 5V 2A output
current(not included) to charge the battery.
Power BankPhone Charger Computer Charging Car Charger
1. Connect the lithium battery with USB cable first and then choose one of the
method as below picture shown to connect with USB plug.
2. The USB red indicator light keeps bright when charging. And the light turns
green when fully charged.
Part installation and disassemble
9
www.udirc.com
Picture 3
Picture 4
3. Install the rod into the third hole of steering gear arm( picture 3).
4. Install the steering gear into its slot and lock the press pieces and rod screws
(picture 4).
( Replace the steering gear when powered on, please take care of the propeller
rotating accidentally )
Lock the screw when the
rudder is loaded into the
slot of the steering gear.
Tail rudder screw
Steering gear replacement
When the steering gear is damaged, you need to take out the steering gear holder,
and pick out the defective part, then loose the steering gear arm. When install the
new steering gear, power on the boat and install the arm to the steering gear,
lock the fasten parts, then it’s ok to play.
1. Disassemble the tail rudder screw, and then loose the steering gear press part
and take out the steering gear.(Picture 1)
2. When the new steering gear is powered on, install the arm and fasten the
screw, please take care of the vertical degree( picture 2).
(There is some tolerance which is normal)
Picture 2
Picture 1
Steering gear
screw
Steering fastener screw
10
www.udirc.com
Checklist before Flight
1. Make sure the boat battery and transmitter battery are fully charged.
2. Please make sure the transmitter throttle stick and rudder knob can be reset.
3. Please strictly obey the order of turn on and turn off before operation. Turn on the
transmitter power first and then turn on the boat power before playing; Turn off the boat
power first and then turn off the transmitter power when finish playing. Improper turn on
and turn off order may cause the boat out of control and threaten people’s safety.
Please cultivate a correct habit of turn on and turn off.
4. Make sure the connection is solid between battery and motor etc. The ongoing vibration
may cause bad connection of power terminal make the boat out of control,
5. Improper operation may cause impact to the boat and damage the hull or propeller,
then cause difficult control or unable to control. Please go to the local distributor to buy
new parts for replacement so that the boat will return to its best status.
Sailing steps
Boat battery installation method
1. Twist to left or right to open the outer cover lock (Picture 5), then open up the
cabin cover (Picture 6).
Picture 5
Picture 6
2. The three inner lid locks on the right and the tail turn left to unlock,two locked
inner locks on the left and unlocked to the right(Picture 7) then the inner cover
of the cabin can be removed(Picture 8).
Picture 7
Autres manuels pour UDI009
1
Table des matières
Autres manuels UDI R/C Jouet
UDI R/C
UDI R/C UDI023 Manuel utilisateur
UDI R/C
UDI R/C UDI010 Manuel utilisateur
UDI R/C
UDI R/C UDI017 Manuel utilisateur
UDI R/C
UDI R/C UDI018 Manuel utilisateur
UDI R/C
UDI R/C UDI008 Manuel utilisateur
UDI R/C
UDI R/C UDI002 Manuel utilisateur
UDI R/C
UDI R/C UDI003 Manuel utilisateur
UDI R/C
UDI R/C UDI009 Manuel utilisateur
UDI R/C
UDI R/C U12S Manuel utilisateur
UDI R/C
UDI R/C UDI009 Manuel utilisateur
