Ublox EVK-F9T Manuel utilisateur

Setup overview

1. Download and install the u-center GNSS evalua-

tion software from www.u-blox.com/u-center.

2. Connect the unit to a PC. Options:

• Connect via USB port. The USB driver installs

automatically when the device is connected to

the PC; internet connection is required.

• Connect via RS232 port (UART interface). Set

the interface switch (2) to I2C.

• SPI / I2C: Set switch to either SPI or I2C and

connect the appropriate pins (1).

Note: Press RST after setting the switch.

3. The device must always have power, either via

USB on the back or the V5 IN pin (3) on the front.

4. Connect the provided GNSS antenna to the eval-

uation unit and place the antenna so that it has

an unobstructed view to the sky. Alternatively,

connect a GNSS simulator signal directly to the

EVK-F9T RF input.

5. Start the u-center GNSS evaluation software

and select the corresponding COM port and

baud rate.

Quick start for EVK-F9T

13 2

Interfaces

EVK-F9T can be used to evaluate all interfaces

available on the u-blox F9 timing modules.

The evaluation unit provides a standard USB

connector for communication and powering the

device, and an RS232 connector for connecting

to the COM port on your PC.

SPI and the I2C interfaces are designed to ena-

ble communication with a host CPU.

Kit includes

• EVK-F9T evaluation board

• Micro USB cable

• ANN-MB1 multi-band (L1/L5) active GNSS

antenna

• Welcome card

u-center installation

• Internet connection is required.

• Supported Windows operating systems are

Windows 7 and onwards (x86 and x64).

• Unzipthedownloadedu-centersetuple,

runtheextractedle,andfollowtheinstaller

instructions.

• When the installation is complete, the

u-center program is available in the Windows

Start menu > All programs > u-blox.

More information

See the recommendations in the EVK-F9T

User guide when using the EVK with a GNSS

simulator.

For more information about EVK-F9T, contact

your nearest u-blox support. For complete con-

tact information, visit us at www.u-blox.com.

Autres manuels Ublox Récepteur

Ublox

Ublox NEO-D9C Manuel d'utilisation et d'entretien

Ublox

Ublox NEO-D9S Manuel d'utilisation et d'entretien

Ublox

Ublox MAX-M10S Manuel d'utilisation et d'entretien

Ublox

Ublox EVA-M8M Guide de configuration rapide

Ublox

Ublox EVA-M8M Guide de configuration rapide

Ublox

Ublox Navilock NL-82002U Manuel utilisateur

Ublox

Ublox NEO-M9N Manuel d'utilisation et d'entretien

Ublox

Ublox LEA-M8S Guide de configuration rapide

Ublox

Ublox EVA-7M Manuel utilisateur

Ublox

Ublox ZED-F9R Manuel d'utilisation et d'entretien

Ublox

Ublox XPLR-M9 Manuel utilisateur

Ublox

Ublox ZED-F9R Manuel d'utilisation et d'entretien

Ublox

Ublox EVK-M91 Manuel utilisateur

Ublox

Ublox EVK-7 Manuel utilisateur

Ublox

Ublox LEA-M8F Guide de configuration rapide

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur