Ubiquiti LTU-Lite Manuel utilisateur
5 GHz LTU Multi-Purpose
Radio System
Model: LTU-Lite
Package Contents
LTU‑Lite Wall Mount
Bracket
Screws
(Qty. 2)
Screw Anchors
(Qty. 2)
Zip Tie Gigabit PoE (24V, 0.5A)
with Mounting Bracket
Power Cord
Installation Requirements
• LTU PtMP AP, such as model LTU‑Rocket
• Phillips screwdriver for wall‑mounting
• (Recommended) 2 Outdoor Gigabit PoE surge protectors
Note: For guidelines about grounding and lightning
protection, follow your local electrical regulatory
codes.
• Outdoor, shielded Category 6 (or above) cabling and
shielded RJ45 connectors are required for all wired Ethernet
connections.
Hardware Overview
1
23
Power LED The Power LED will light blue when the device is
connected to a power source.
Ethernet Port 10/100/1000 Ethernet port used to connect the
power and should be connected to the LAN and DHCP server.
Reset Button To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the device is
poweredon.
Hardware Installation
1.
2.
3.
Wall Mount
1.
2.
3.
4.
Pole Mount
1.
M/N:LTU-LITE
24V 0.5AGigE PoE
FCCID: SWX-LTUL
IC:6545A-LTUL
2.
3.
M/N:LTU-LITE
24V 0.5AGigE PoE
FCCID: SWX-LTUL
IC:6545A-LTUL
Autres manuels pour LTU-Lite
3
Table des matières
Autres manuels Ubiquiti Récepteur
