TYPHOON 4000 Manuel utilisateur
OPERATION MANUAL
Typhoon 4000
PRESSURE
BLASTER
TyphoonBlaster.com
2
|
TABLE OF CONTENTS
Safety
3 - Safety Warning Symbols and Meaning
4-5 -IntroductionandProductIdentication
6-13 -ImportantSafetyEquipmentSpecicWarnings
Inspection
14 - 15 - Gas Washer Components
16 - Pre-Operation Checklist
Operations
17 - 21 - Starting Your Washer
22 - Shutting Down Your Washer
23 - Spray Tips
24 - Using Black Soap Nozzle
25-26 - Change Spray Tip / Adjust Pressure
Maintenance
27 - 28 - Winter Storage
Troubleshooting
29 - 31 - Troubleshooting
Assemby
32 - 33 - Assembly Kit
34 - 37 - Frame Assembly
Operations
38 - 39 - Limited Warranty
Feaatures and Specications
40 -Specications
Do not operate equipment until reading and
understanding operator’s manual.
REVIEW THIS MANUAL THOROUGHLY
Follow all instructions provided within this manual. This equipment
can cause serious injury to people and animals and severe damage to
property if operated negligently or incorrectly. Pay particular attention
to all safety instructions, warnings and notices.
|
3
SAFETY WARNING SYMBOLS
The signal words and meanings are intended to explain
the level of risk associated with this product.
Store in
Dry Place Toxic Fumes Water Water
Supply Wear Eye
Protection
Read Operator’s
Manual Bodily Harm Clogged Electric Shock Explosion
Fire Freezing High Pressure Hot Surfaces Keep Dry
Kickback No Smoking Oil Pinching Powerful Spray
Proper Clearance Proper Lifting PSI Relieve Pressure Slippery
4
|
INTRODUCTION
Using the Operator’s manual
The operating manual is an important part of your pressure blaster
and should be read thoroughly before initial use, and referred to
often to make sure adequate safety and service concerns are being
addressed. Reading the owner’s manual thoroughly will help avoid any
personal injury or damage to your machine. The information in this
manual will offer you the most effective tools for cleaning as well as
the safest. By knowing how best to operate this machine you will be
better positioned to show others who may also operate the unit. This
manual contains information for the complete range of be pressure
blasters, and is placed in order starting from the safety requirements
to the operating functions of your machine. You can refer back to
themanualatanytimetohelptroubleshootanyspecicoperating
functions, so store it with the machine at all times.
Notice
Actual pressure released at the point of discharge may vary by
machine due to varying factors including: Volume of water being fed to
the machine by the water source, the inclusion of a Chemical injector
in the line, or variations in Engine performance
Attention: Read through the
complete manual prior to the initial
use of your pressure blaster.
|
5
Record Identication Numbers
Pressure Blaster
If you need to contact an Authorized Dealer or Customer Service line
(1-866-338-7519) for information on servicing, always provide the
productmodelandidenticationnumbers.
You will need to locate the model and serial number for the machine
and record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identication Numbers
Model Number:
Serial Number:
Engine
Horse Power:
PRODUCT IDENTIFICATION
6
|
Understanding the Machine Safety Labels
The machine safety label shown below is placed on your machine to
draw attention to potential safety hazards.
SAFETY
Do not leave unit running longer than 1 minute
without using or pump will overheat. Ne pas
laisser fonctionner inutilement l’unité pendant plus
d’une minute.
Do not let unit freeze.
La pompe risquerait de surchauffer.
Always wear eye protection.
Porter toujours des lunettes de sécurité.
High pressure sprays can cause serious bodily
inury. Use with Caution. Les jets à haute pression
peuvent causer de graves blessures corporelles.
Soyez prudent.
Warranty is void if you exceed preset pressure
causing severe damage to gauge and unloader.
Ne pas exposer cette unité au gel la guarantie
n’est pas applicable si vous exédez la mesure
de préssion PSI indiqué. Causez beaucoup de
dommage à la indicateur et la dechargeur.
|
7
SAFETY
Save these Instructions Safety Rules
This is the safety alert symbol. It is used
to alert you to potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible
injury or death.
The safety alert symbol ( ) is used with a signal word
(DANGER, CAUTION, WARNING), a pictorial and/or a safety
message to alert you to hazards.
Follow safety messages to avoid or reduce the risk of injury or death.
Hazard Symbols and Meanings
Indicates a hazard which, if not avoided,
WILL result in death or serious injury.
Indicates a hazard which, if not avoided,
could result in death or serious injury.
Indicates a hazard which, if not avoided,
could result in minor or moderate injury.
Indicates a situation that could result in
equipment damage.
8
|
Running engine gives off carbon monoxide, an
odorless, colorless, poison gas.
Breathing carbon monoxide can cause headache
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death.
Some chemicals or detergents may be harmful if inhaled or ingested,
causing severe nausea, fainting, or poisoning.
• Operate pressure washer ONLY outdoors.
• Keepexhaustgasfromenteringaconnedareathroughwindows,
doors, ventilation intakes, or other openings.
• DO NOT start or run engine indoors or in an enclosed area, even if
windows and doors are open.
• Use a respirator or mask whenever there is a chance that vapors
may be inhaled.
• Read all instructions with mask so you are certain the mask will
provide the necessary protection against inhaling harmful vapors.
Use of pressure washer can create puddles and
slippery surfaces.
Kickback from spray gun can cause you to fall.
Operate pressure washer from a stable surface.
• The cleaning area should have adequate slopes and drainage to
reduce the possibility of a fall due to slippery surfaces.
• Be extremely careful if you must use the pressure washer from a
ladder, scaffolding, or any other similar location.
• Firmly grasp spray gun with both hands when using high pressure
spray to avoid injury when spray gun kicks back.
SAFETY
|
9
Fuelanditsvaporsareextremelyammableand
explosive.
Fire or explosion can cause severe burns or
death.
When Adding or Draining Fuel
• Turn pressure washer OFF and let it cool at least 2 minutes before
removing fuel cap. Loosen cap slowly to relieve pressure in tank.
• Fill or drain fuel tank outdoors.
• DONOToverlltank.Allowspaceforfuelexpansion.
• If fuel spills, wait until it evaporates before starting engine.
Keepfuelawayfromsparks,openames,pilotlights,heat,
and other ignition sources.
DO NOT light a cigarette or smoke.
When Starting Equipment
• Ensuresparkplug,mufer,fuelcap,andaircleanerareinplace.
• DO NOT crank engine with spark plug removed.
When Operating Equipment
• DO NOT tip engine or equipment at angle which causes fuel to
spill.
• DONOTsprayammableliquids.
When Transporting or Repairing Equipment
• Transport/repair with fuel tank EMPTY or with fuel shutoff valve
OFF.
• Disconnect spark plug wire.
SAFETY
10
|
When Storing Fuel or Equipment with Fuel in Tank
• Store away from furnaces, stoves, water heaters, clothes dryers,
or other appliances that have pilot light or other ignition source
because they can ignite fuel vapors.
Risk of electrocution.
Contact with power source can cause electric
shock or bum.
NEVER spray near power source.
After each starting attempt, where engine fails
to run, always point spray gun in safe direction
and squeeze spray gun trigger to release high
pressure.
Firmly grasp spray gun with both hands when
using high pressure spray to avoid injury when
spray gun kicks back.
Contactwithmuferareacanresultinserious
burns.
Exhaust heat/gases can ignite combustibles,
structuresordamagefueltankcausingare.
• DO NOT touch hot parts and AVOID hot exhaust gases.
• Allow equipment to cool before touching.
Keep at least 5 feet (1.5 m) of clearance on all sides of
pressure washer including overhead.
SAFETY
Autres manuels pour 4000
1
Table des matières
Autres manuels TYPHOON Nettoyeur haute pression
