Tyco Electronics F08 Instructions de montage
TYCO ELECTRONIC PRODUCT GROUP PAGE 1 OF 1
F08 INSTALLATION & PROGRAMMING MANUAL
DOCUMENT DATA SHEET
DO NOT PRINT
Document Number LT0082
Document Title F08 Installation & Programming Manual
Manual Volume 1
Word Processor Word 2000
File Name G:\CH_TSP_All Staff\VIGDOCS\MANUALS\F08\LT0082 Iss 3.04.DOC
Printer HP Laserjet 4M Plus
Current Issue Issue 3.04, 24 March 2006
LT0082 Issue 3.0 Amendment 0
Prefix
Chapter 1 : Introduction
Chapter 2 : FIP Installation
Chapter 3 : Placing into Operation
Chapter 4 : Programming
Chapter 5 : Application Considerations
Appendix A1 : Compatible Batteries
Appendix A2 : Compatible Actuating Devices
Appendix A3 : Installation Drawings
Zone Designation Label
PRINTING SPECIFICATIONS
1. Paper Type: 80gsm Bond White
2. Manual Size: A4
3. Place in 4-ring binder
Front and spine inserts to be fitted with labels stating:
LT0082
TYCO F08
INSTALLATION & PROGRAMMING
5. All pages are double sided, except for the diagrams at the end of the manual.
Chapter 0
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Appendix A1-3
6
4
34
8
24
14
6
=
=
=
=
=
=
=
3
2
17
4
12
7
3
double-sided
double-sided
double-sided
double-sided
double-sided
double-sided
double-sided
96 48
Drawings + 5 single-sided
F08 Installation & Programming Manual Document No: LT0082
THIS PAGE INTENTIONALLY LEFT BLANK
Page ii 24 March 2006 Issue 3.04
F08
INSTALLATION & PROGRAMMING
MANUAL
F08 PRODUCT MANUAL
DOCUMENT: LT0082
Issue 3.04; 24 March 2006
The F08 Fire Indicator Panel is manufactured for
Tyco Services Fire & Safety
47 Gilby Road
Mt Waverley
VIC 3149
AUSTRALIA
Tel : +61-3-9538 7220
Fax : +61-3-9538 7255
COPYRIGHT (C) 2002
Information contained in this document is copyright, and shall not be reproduced in any form whatsoever,
or its contents disclosed to any third party, without the written consent of Tyco Services Fire & Safety (The
Company). Information contained in this document is believed to be accurate and reliable, however the
company reserves the right to change the content without prior notice.
F08 Installation & Programming Manual Document No: LT0082
NON-DISCLOSURE AGREEMENT
Tyco Services Fire & Safety (THE COMPANY) and the User of this/these document(s)
desire to share proprietary technical information concerning electronic systems.
For this reason the company is disclosing to the User information in the form of this/these
document(s). In as much as the company considers this information to be proprietary and
desires that it be maintained in confidence, it is hereby agreed by the User that such
information shall be maintained in confidence by the User for a period of TEN YEARS after
the issue date and only be used for the purpose for which it was supplied.
During this period, the User shall not divulge such information to any third party without the
prior written consent of the company and shall take reasonable efforts to prevent any
unauthorised disclosure by its employees. However, the User shall not be required to keep
such information in confidence if it was in their possession prior to its receipt from the
company; if it is or becomes public knowledge without the fault of the User; or the
information becomes available on an unrestricted basis from a third party having a legal right
to disclose such information.
The User's receipt and retention of this information constitutes acceptance of these terms.
This information is copyright and shall not be reproduced in any form whatsoever.
END USER LIABILITY DISCLAIMER
The F08 Fire Indicator Panel provides a configuration programming facility which may be
accessed via a programming push-button. Because this programming facility allows the user
to define in detail the operation of the F08 System, changes may be made by the user that
prevent an installation from meeting statutory requirements.
The Company, therefore cannot accept any responsibility as to the suitability of the functions
generated by the user using the programming facility of the F08.
* * WARNING * *
The F08 is approved to AS/NZ 3548 Class A.
In a domestic environment it may cause radio interference, in which case the user
may be required to take adequate measures.
Page ii 24 March 2006 Issue 3.04
Document No: LT0082 F08 Installation & Programming Manual
TABLE OF CONTENTS
NON-DISCLOSURE AGREEMENT......................................................................................ii
END USER LIABILITY DISCLAIMER...................................................................................ii
AMENDMENT LOG..............................................................................................................v
1. INTRODUCTION ............................................................................................................. 1-1
1.1 USING THIS MANUAL............................................................................................. 1-2
1.2 ASSOCIATED DOCUMENTATION.......................................................................... 1-3
1.3 TERMINOLOGY ....................................................................................................... 1-4
2. FIP INSTALLATION........................................................................................................ 2-1
2.1 OVERVIEW............................................................................................................... 2-2
2.2 CABINET INSTALLATION....................................................................................... 2-3
2.3 MAINS WIRING ........................................................................................................ 2-6
2.4 MAIN BOARD........................................................................................................... 2-8
2.5 BATTERY INSTALLATION.................................................................................... 2-11
2.6 FIP MCP WIRING ................................................................................................... 2-12
2.7 ALARM ZONE WIRING & CIRCUIT TYPES.......................................................... 2-13
2.8 BELL OUTPUT WIRING......................................................................................... 2-18
2.9 ANCILLARY RELAY OUTPUT WIRING................................................................ 2-26
2.10 AUXILIARY OUTPUT WIRING........................................................................... 2-28
2.11 DOOR HOLDER WIRING ................................................................................... 2-29
2.12 BRIGADE INTERFACE RELAYS....................................................................... 2-30
2.13 DISPLAY & ZONE LABELLING......................................................................... 2-34
2.14 DOCUMENTATION............................................................................................. 2-35
3. PLACING INTO OPERATION......................................................................................... 3-1
3.1 GENERAL................................................................................................................. 3-2
3.2 MAINS ISOLATE SWITCH....................................................................................... 3-2
3.3 POWER UP............................................................................................................... 3-4
Issue 3.04 24 March 2006 Page iii
F08 Installation & Programming Manual Document No: LT0082
3.4 COMMISSIONING CHECKLIST............................................................................... 3-6
4. PROGRAMMING............................................................................................................. 4-1
4.1 PROGRAMMING FEATURES.................................................................................. 4-2
4.2 ENTERING PROGRAMMING MODE....................................................................... 4-5
4.3 EXITING PROGRAMMING MODE........................................................................... 4-6
4.4 RESET TO DEFAULT PARAMETERS .................................................................... 4-7
4.5 PROGRAMME ZONE TO OUTPUT MAPPING........................................................ 4-8
4.6 PROGRAMMING ZONES AS LATCHING OR NON-LATCHING.......................... 4-12
4.7 PROGRAMMING ZONE INPUT TYPE................................................................... 4-14
4.8 ENABLING OR DISABLING ZONES..................................................................... 4-16
4.9 PROGRAMMING ANCILLARY RELAY SUPERVISION........................................ 4-18
4.10 PROGRAMMING ZONE AUXILIARY OUTPUT MODE...................................... 4-20
4.11 EXIT PROGRAMMING CHECKLIST.................................................................. 4-22
4.12 TROUBLE SHOOTING IN PROGRAMMING MODE.......................................... 4-23
5. APPLICATION CONSIDERATIONS............................................................................... 5-1
5.1 SUB-PANEL WIRING............................................................................................... 5-2
5.2 FIRE DETECTION IN HAZARDOUS AREAS.......................................................... 5-5
5.3 PREVENTION OF NON “FIRE” ALARMS............................................................. 5-10
5.4 TROUBLE SHOOTING........................................................................................... 5-11
APPENDIX A1 - COMPATIBLE BATTERIES.................................................................. A1-1
APPENDIX A2 - COMPATIBLE ACTUATING DEVICES................................................ A2-1
APPENDIX A3 - INSTALLATION DRAWINGS ............................................................... A3-1
Page iv 24 March 2006 Issue 3.04
Document No: LT0082 F08 Installation & Programming Manual
AMENDMENT LOG
ISSUE DATE AMENDMENT ECN
1 10 Oct 89 Original with two versions:
- Document 696-005 -> Installation
- Document 696-004 Issue 1 -> Programming
Amendment: 1 December 14, 1989
2 11 Apr 92 Combined Installation, Programming and Brigade Kit
Documentation.
28 May 98 Converted to Word 95 document.
3 27 Oct 98 For V3.00 F08 software, additional input types,
RAD/SAD, etc, 15V MCP, Resistor EOL. 2769
3.01
31 Jul 02 Prefix, Pages 2-6, 2-7, 2-27, 5-6….5-12, Appendix A
revised. 3322
3.02 1 Mar 05 Fig 2.12 had Ext Def- directly driving the detector
circuit.
Appendix A2 - add 614CH, 614I & 614P
3524
3635
3.03 28 Oct 05 Added System Sensor detector 885WP-B to
Appendix A. ECS
1181
3.04 24 Mar 06 Appendix A2 – added 614T 3731
Issue 3.04 24 March 2006 Page v
F08 Installation & Programming Manual Document No: LT0082
THIS PAGE INTENTIONALLY LEFT BLANK
Page vi 24 March 2006 Issue 3.04
Document No: LT0082 F08 Installation & Programming Manual
Introduction
1. INTRODUCTION
Issue 3.04 24 March 2006 Page 1-1
F08 Installation & Programming Manual Document No: LT0082
Introduction
1.1 USING THIS MANUAL
This Manual provides information for personnel engaged in the installation, programming
and commissioning of the F08 Fire Alarm Panel. It is available only to bonafide installation
and maintenance organisations.
The structure of this manual is as follows:
Chapter 1, Introduction, describes the manual, explains the format and terminology used
in this manual, and lists associated F08 product manuals.
Chapter 2, FIP Installation, describes the installation of the F08 FIP; mains wiring; battery
installation; detector, ancillary, auxiliary, bell and brigade output wiring; and other related
wiring.
Chapter 3, Placing Into Operation, describes the procedures for placing an F08 into
operation. A commissioning checklist is included.
Chapter 4, Programming An F08, describes the steps necessary in programming an F08
FIP ready for a particular installation.
Chapter 5, Application Considerations, describes some aspects of special applications,
such as remote panel operation, false alarm minimization and trouble shooting.
Appendix A1, Compatible Batteries, gives a list of compatible batteries.
Appendix A2, Compatible Detectors, gives a list of detectors compatible with the F08.
Appendix A3, Installation Drawings, Includes wiring diagrams for the various brigade
interfaces and provides a place for system installation drawings to be inserted.
Page 1-2 24 March 2006 Issue 3.04
Table des matières
Manuels Détecteur de fumée populaires d'autres marques
System Sensor
System Sensor DH500ACDC Manuel utilisateur
Resolution Products
Resolution Products RE612 CryptiX Manuel utilisateur
First Alert
First Alert PC900V Manuel utilisateur
Eminent
Eminent EM6590 E-Domotica Manuel utilisateur
Ei Electronics
Ei Electronics Ei Ei168RC Manuel utilisateur
Carrier
Carrier Kidde Quell Q301 Manuel utilisateur
