Twinkly PRO TWPRO1000ETHP-B Series Guide de l'utilisateur
Ethernet Controller Setup
Ver. 3
Ethernet Controller Setup –Ver.3
SETUP
Equipment needed
1
2
3
4
5
1Power adapter
2Ethernet cable gland
3Access point (not provided)
4Ethernet cable (not provided)
5Ethernet controller
6LEDs e.g. TWPRO250STP
6
Unboxing - controller ethernet box
TWPRO1000ETHP-Bxx
1x Power adapter
1x Ethernet controller
1x Ethernet cable gland
2
Ethernet Controller Setup – Ver. 3
SETUP
Connect to thecontroller
to an access point
STEP 1 - Connect one side of the
ethernet cable
Option A - to the access point using an
open port (not WAN)
Option B - to a network switch and
connect the switch to an open access
point port (not WAN)
Note: connect WAN port to internet
cable in case you want to control
remotely
3
Ethernet Controller Setup – Ver. 3
IP65 ethernet cable setup (you can
skip this step if you use indoor)
SETUP
Connect to thecontroller
to an access point
STEP 2 – Connect the other side of
the ethernet cable to the controller
4
Ethernet Controller Setup – Ver. 3
SETUP
Connect the power adapter to
the controller
CAUTION!
Keep the cap closed when the ethernet
cable is not connected
Close tightly to prevent water infiltration
1
1
2
2
5
Ethernet Controller Setup – Ver. 3
STEP 5 – Switch on and have fun!
SETUP
Connect and switch on the strings
STEP 4 – Connect the strings to the
controller
Note: for easier installation, we
recommend to create your installation
before connecting strings to the
controller.
In case of multiple controllers repeat
steps 1 to 4 for each controller!
6
Ethernet Controller Setup – Ver. 3
Decorate like a boss!
ENJOY
Scan the QR code to download
the TwinklyApp
7
If you need any further information, please feel free to
contact us:
sales@pro.tw inkly.com
Autres manuels Twinkly Contrôleurs
