Twenty20 Corporation ContourHD Manuel utilisateur
ContourHD
Wearable Camcorder
User’s Guide
About the Camera
SD
HD
a Power Button
b Battery Status
c Record Button
d Rotating Lens
eRecord Status
f Memory Status
a HD/SD Switch
b USB
c Charge Indicator
d Battery Latch
e Battery Slot
f MicroSD Card
a
bc
d
e
f
a
bc
d
fe
• Open the back door.
• Insert battery with (+) aligned and
close orange latch.
• Align back door slightly above camera and
slide down until it locks in.
Getting Ready
• Push and hold power button
(1 second) to turn on.
• You are ready to record
Note: Power up with record switch forward
to enable silent mode.
Power Up
• Start recording: slide switch forward.
• Stop recording: slide switch back.
Record
start
stop
thumb tab
Share
• Turn camera on and connect to
computer with USB cable.
• Install VholdR Desktop directly from
MicroSD card provided or download at:
www.VholdR.com/support/software.
• Import, clip and share your videos…
Note: HD is beautiful but some computers
cannot play smooth HD video. Visit
www.vholdr.com/support for the latest
information on computer requirements.
Flat Surface Mount
• Unhook leash on base and loop
through camera.
• Slide camera onto rails until it clicks.
side of helmet recommended).
• Hold base, pull camera away, rotate to
align, and press into mount to reattach.
Goggle Mount
• Slide camera on rails until it clicks.
• Press thumb on large tab (top of
mount) and pull camera away.
• Slide goggle strap into base.
• Align vertical angle of camera.
• Snap rails back into mount over strap.
Align
• Press power button to activate lasers.
• Aim at your hand, a wall, or other
object.
• Rotate lens to align lasers horizontally.
• Remove and reorient mount rails to
adjust mount angle. Aim a little high
for the best shot.
Resolution Settings
• Use switch under back door to select
video resolution.
HD: Amazing Clarity
1280 x 720 at 30fps
30 min avg record time/GB
SD: Fast Action
848 x 480 at 60fps
60 min avg record time/GB
• 2GB microSD card included. Accepts up
to 16GB microSD (SDHC Compatible)
card.
Power
Recharge
• Connect to computer with USB cable.
• Red light indicates charging.
• Charge complete when camera beeps
• Press and hold power button 3 seconds.
15 min of inactivity.
Status
Press power button to check status.
• Memory / Battery Available
Green > 80% | Yellow 20-80% | Red <20%
• Record Status
Green = ready | Red = recording
Flashing = memory full or corrupt
Error Conditions
• Memory full: (3) beeps, recording stops.
• No beeps: camera in silent mode.
We are here to help
Keeping Shoot and Share simple is what
we are all about. We would love to help
you have a great ContourHD experience
so please contact us with any quesitons
you have.
Hours: Monday - Friday (9am to 6pm PST)
Toll Free: 866.397.6920 (USA)
International: 206.792.5226
Email: support@vholdr.com
Web: www.vholdr.com/support
Autres manuels pour ContourHD
1
Table des matières
Autres manuels Twenty20 Corporation caméscope
Twenty20 Corporation
Twenty20 Corporation VholdR J61250712V1100 Manuel utilisateur
Twenty20 Corporation
Twenty20 Corporation 1200 ContourHD Manuel utilisateur
Twenty20 Corporation
Twenty20 Corporation ContourHD1080p Manuel d'installation et d'exploitation
Twenty20 Corporation
Twenty20 Corporation ContourHD Manuel utilisateur
Manuels caméscope populaires d'autres marques
Panasonic
Panasonic AG-HMC152EN Manuel utilisateur
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur
MYDLINK
MYDLINK DCS-6100LH Manuel utilisateur
Sony
Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur
SECURECOM
SECURECOM V-5014B Manuel utilisateur
Panasonic
Panasonic HDC-SD100 Manuel utilisateur
