TV One Magenta Encoder-100 Manuel utilisateur

QSG-ENCODER-100-V1.20

Mar 2019

Encoder-100 Streaming Media Encoder

Quick Start Guide V1.20

In this guide

About your Encoder-100 2

Quick start 3

CORIOgrapher™ can't find or connect to my

Encoder-100 10

Regulatory compliance 12

1 Magenta™bytvONE

Thanks for buying this Encoder-100 from tvONE.

The Encoder-100 streaming media encoder allows you to stream

high quality video and audio from a range of sources to the Dual

stream input module of your CORIOmaster™, CORIOmaster mini™,

or CORIOmaster micro™.

Features

nConvert video and audio to high quality digital stream.

nHigh quality, low bandwidth encoding with H.264 compression.

nFull 1080p HD support at up to 60frames per second.

nSingle channel encoder.

nSupports streams with low latency.

nSupports unicast and multicast streaming.

nHDMI video and audio input and output.

nAnalog audio input and output.

nPreview your video signal and stream separately.

Recommendations

nFor best results, use Gb Ethernet cables and equipment.

nIn industrial environments, use shielded Ethernet cables.

Shielded Ethernet cables are often marked F/UTP or FTP.

QSG-ENCODER-100 2

About your Encoder-100

Encoder-100 rear panel

DC5V Connect to an electrical outlet

LAN Sends encoded signal to your network

Connect to your network with Ethernet

PREVIEW Allows you to preview your encoded signal

Connect to a display with a VGA cable

HDMIOUT Allows you to preview your encoded signal

Connect to a display with an HDMI cable

HDMIIN Receives video and digital audio signal from a source

Connect to a source with an HDMI cable

AUDIOOUT Allows you to preview your audio signal

Connect a speaker with a 3.5mm jack audio cable

AUDIOIN Receives analog audio from a source

Connect a 3.5mm jack audio cable

3 Magenta™bytvONE

Quick start

It's easy to get started with the Encoder-100, but if you want more help

with any of these steps, select in CORIOgrapher™ and search, or

ask a question.

The Encoder-100 cannot encode HDCP encoded sources.

Before you start

To use an Encoder-100, you must have a Dual stream input module

installed in your CORIOmaster™, CORIOmaster mini™, or

CORIOmaster micro™.

Setting up the Encoder-100

Connect your cables.

A. Connect the power supply to an electrical outlet.

B. Connect an Ethernet cable to a DHCP-enabled network, or,

connect an Ethernet cable directly to a DHCP-enabled PC.

C. Connect an HDMI™ cable to the video source that you wish to

stream.

For example, you could connect a camera, an endoscope, or a

media player.

QSG-ENCODER-100 4

nOPTIONAL: if you want to stream analog audio, or preview your

audio, connect a 3.5mm jack audio cable.

nOPTIONAL: if you want to see a preview of your stream, connect

a VGA cable to PREVIEW, or an HDMI cable to HDMIOUT, and to

a display.

The power connector is a

latching power connector. To

remove the power connector

from your Encoder-100, slide

the sleeve backward.

Configuring the Encoder-100 with CORIOgrapher

The Encoder-100 uses DHCP. Before you configure your Encoder-100,

make sure DHCP is enabled on your PC.

1. Open CORIOgrapher , connect to your CORIOmaster, and read

the configuration from your device.

5 Magenta™bytvONE

2. Set up a video wall that includes at least one window playing the

Dual stream input module, and select Take.

3. Double-click the window you wish to play streaming media, and

select (Media Player) Manage.

4. Select IP Streams, select your Encoder-100, and select Manage.

nWhen you first connect, your Encoder-100 is named with its

Device ID. Find the Device ID on the bottom of your

QSG-ENCODER-100 6

Encoder-100.

nIf your Encoder-100 isn't displayed, select Find and enter the

URL of your Encoder-100.

nIf you can't find or connect to your Encoder-100, read

troubleshooting advice on page 10.

5. Select System, and name your Encoder-100.

Names can be up to 62 characters long, and can't be blank.

6. Select Network, and choose network settings for your

Encoder-100.

7 Magenta™bytvONE

nIf you choose DHCP, the network assigns you an IP address.

nIf you choose a static IP address, enter a value for your IP

address, subnet mask, and gateway.

If you need help with network settings, contact your network

administrator.

Static IP address

If you choose a static IP address, make sure you enter a unique

value for your IP address. Using the same IP address for multiple

devices can cause your devices to disconnect. Contact your network

administrator for help.

7. Select Capture, and check that your audio source is correct.

Risk of delayed signal

If your HDMI™ video doesn't contain embedded audio, select None

or Analog from Audio.

Autres manuels pour Magenta Encoder-100

Table des matières

Autres manuels TV One Convertisseur de média

TV One

TV One 1T-AVPC-HDMI Manuel utilisateur

TV One

TV One 1T-FC-425 Manuel utilisateur

TV One

TV One 1T-V1280HD-ST Manuel utilisateur

TV One

TV One C2-2000A Series Manuel utilisateur

TV One

TV One 1T-C2-511 Manuel utilisateur

TV One

TV One 1T-PCDVI-PCDVI Manuel utilisateur

TV One

TV One 1T-VGA-DVI Manuel utilisateur

TV One

TV One Magenta Encoder-100 Manuel utilisateur

TV One

TV One MAGENTA Pathfinder 500 Series Manuel utilisateur

TV One

TV One 1T-V1280DVI Manuel utilisateur

TV One

TV One 1T-C2-100 Manuel utilisateur

TV One

TV One 1T-VS-668 Manuel utilisateur

TV One

TV One 1T-AP-216 Manuel utilisateur

TV One

TV One C3-540 CORIOmaster Manuel utilisateur

TV One

TV One 1T-FC-766 Manuel utilisateur

TV One

TV One 1T-VS-624 Manuel utilisateur

TV One

TV One C2-2855 Manuel utilisateur

TV One

TV One 1T-VS-658 Manuel utilisateur

TV One

TV One 1T-AP-216 Manuel utilisateur

TV One

TV One C2-2450A Manuel utilisateur

TV One

TV One 1T-C2-750 Manuel utilisateur

TV One

TV One 1T-VS-622 Manuel utilisateur

TV One

TV One C2-2855 Guide d'installation

TV One

TV One C2-2855 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur